LANCOM 883 VoIP GmbH System User Guide

LANCOM 883 VoIP GmbH System User Guide

LANCOM 883 VoIP
Quick Reference Guide

Mounting and Connecting the Device

1. VDSL interface
   Use the supplied DSL cable for the IP-based line to connect the VDSL interface and the provider’s telephone socket. For more information, please contact your Internet service provider.

2. Ethernet interfaces
   Use an Ethernet cable to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

3. Analog interfaces
   Connect analog terminal devices to the analog interfaces either directly via RJ11, or with the help of the enclosed TAE adapters. Further adapters are optionally available.

4. Configuration interface
   Use a serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring (separately available).

5. ISDN interfaces
   ISDN 1:
   Internal (NT) or external (TE) ISDN bus.
   This feature is controlled by LCOS.
   ISDN 2:
   Internal (NT) ISDN bus.

A 100-Ohm resistor for line termination is switchable in LCOS.

6. USB interface
   You can use the USB interface to connect a USB printer or a USB memory stick.

7. Power
   After connecting the cable to the device, turn the bayonet connector 90° clockwise until it clicks into place. Use only the supplied power adapter.

Please observe the following when setting up the device

• Do not rest any objects on top of the device

• For devices to be operated on the desktop, please attach the adhesive rubber footpads

• In case of wall mounting, use the drilling template as supplied

• Keep the ventilation slots on the side of the device clear of obstruction

• Rack installation with the optional LANCOM Rack Mount (separately available)

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. 

Technical Details

*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.

This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions.
111633/12/21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>