imperii RR FIERRO SmartBand Oxigen Black Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartBand Oxigen Black Instruction Manual
Basic Layout
Charging the Device
Please charge the device before use the smart bracelet.
Charger: Voltage 5V
Charge time: about 2 hours
Please make sure the charging thimbles match the points well.
Functions
Time & Date
After the device has been connected via bluetooth successful with your phone,
the lime will auto synchronize correctly with your phone.
Blood Pressure Monitor
pressing the touch button turn to the blood pressure screen get start.and the
icon will flicker(please stay still when lest the blood pressure) if you need
save the data of test result please operate this function by APP. Manual start
this function on the device the data will not save on the APP.
Heart Rate Monitor
Cycle through to the heart rate page then get start ,and and the heart rate
icon will flicker.it will be better to wear the smart bracelet on your left
hand, 1.5cm after styloid process of the ulna, and please make sure the heart
rate sensor close to your skin.Manual start this function on the device the
data will not save on the APP. On App there will show your heart rate data
every 30 minutes tested by device automatically
Pedometer
Calories
Distance
Sleeping Monitor
Device will monitor sleeping data automatically,please check the sleeping
detail data on App Dashboard
Horizontal and Vertical Screen
Press and hold for horizontal and vertical level screen change
Turn On/Off Screen
Press and hold to tum on and turn on.
Bluetooth connection
- Turn on the bracelet.
- Turn on the Bluetooth of your smartphone.
- Download the “H Band” application on your phone.
Once you are in the App, access “Device” to display the name of the bluetooth
device. Select the name of the device to pair it with the App.
Once the connection to Bluetooth is complete. the Date and Time screen will
display 11c0ne corresponding.
Bluetooth Remove
- delete the bluetooth on the APP
- Turn on the App on the smart phone
- Remove the bluetooth on the setting of the smart phone.
How to use APP
After install H Band App,you may required to fill your personal information such as gender, weight etc. Then please connect smart bracelet via bluetooth (please reference to the Bluetooth Paring steps)
Dashboard:
your can check all data here, today, yesterday and data summary.
Step :
Tap to check Steps Distance/Calorie data.
Sleep
Tap to check sleeping data here (such as sleep duration,deep sleep,light sleep
etc)
Heart Rate:
- Check your all day heart rate data.which record your heart rate data every 30 minutes by device automatically.
- Tap + icon to get start heart rate function on device.
Running:
tap to get start the movement, and allow get your position, pull down the
page, you can tap stop to finish record . Each start and stop is a complete
record of the movement, record including the activity time, speed, calorie,
moving routes etc.
Blood pressure
Tap+ icon get start heart rate function.(please stay still when test the blood
pressure) after finish test you can select save to store data for reference.
There Is two BP test mode: Normal and Personal.
Generally please select Normal mode and select on My Device of Normal mode on
settings at the same lime.If special person(hypertension or hypo tension)
please select Personal mode ,and select on My Device of Personal mode and set
your data as well on settings at the same time.
Settings:
(1 )My device:Tap to find device name to get paired.
(a) Message notification:select the notification of phone calls and
messages.
(Paring request appears on APP when bluetooth connected with 10S system smart
phone.please select “pair”to get messages push on the smart watch,select “no”
for no need messages push.)
(a) Alarm: Set alarm clock.
(b) Outsit setting: set sedentary remind
(c) Pair devices: after turn on this function the data on the app can be
upload
(d) Night Turn-wrist: turn on this function ,automatic screen light will
work during night.
(e) Wear detection: turn on this function device will detect whether
device wear on the wrist or not ,when green light sensor test data, if device
not wear on the wrist device will stop test.
(f) BP test mode: please select Normal and Personal according with blood
pressure test on Dashboard.
(g) Reset password: you can reset password to set the device be your
personal use.(means other mobile phone can not connect with your device.)if
your forgetthe password, please on the device sleep screen press and hold till
device Vibration then the password will be reset to original 0000.
(h) Firmware upgrade:upgrade firmware
(1 )Sport goal: set the steps goal of per day.
(2 )Sleep: sleep suggestion from personal data.
(3) Feedback: you can leave messages of the feedback of APP
(4) About us: the vision
Note: the device green light sensor Automatic light every 5 minutes (for
detect and collect sleeping monitor and heart rate date)
Specification
Chip: Nordic 51622
Display: OLEO 0.86″
Battery: 90mAh
Waterproof: IP67
Stand by time: 5 days
Support system: 1OS 8.0 or above, Android 4.3 or above
Heart rate monitor: support
Blood pressure: support
Auto screen light: support
Bluetooth: 4.0
imperii RR FIERRO SmartBand Oxigen Black Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartBand Oxigen Black Instruction Manual –
Download
imperii RR FIERRO SmartBand Oxigen Black Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>