ION AUDIO iSP153 2-Pack Magnet Rocker User Guide

Magnet Rocker TM 2-Pack User Guide

Introduction

Thank you for purchasing the Magnet Rocker™ 2-Pack. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.
Note: Before you first use the product, please fully charge the batteries. Your unit was purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging, power off the speaker while charging.
Use the included micro-USB cable to connect the unit to a power adapter connected to a power outlet and let it charge for up to 2 hours. This helps ensure the longest life for your battery.

Box Contents

2 Magnet Rocker ™ speakers
2 Carabiners
Micro-USB Charging Cable (11.8” / 30 cm)
Quickstart Guide

Support

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support.

Outdoor Use and Care

Though Magnet Rocker TM speakers are water-resistant and able to tolerate splashing water, please review the tips below to get the best performance from your speakers:

• Magnet Rocker TM speakers must only be used outdoors with power outlets or extension cords that are rated for outdoor use.
• Bring Magnet Rocker TM speakers indoors during extreme weather.
• Please do not place Magnet Rocker TM speakers in standing water.
• Please do not connect the power adapter to a Magnet Rocker TM speaker in a wet environment. Make sure the power input, power adapter, and power outlet are all completely dry before making any connections.
• WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will not be affected by water and cause a risk of electric shock.

Setup

The Magnet Rocker TM features a magnetic back panel which allows you to mount the speaker on metallic surfaces.
Also included are two carabiners to hook or hang your Magnet Rocker TM speakers in various arrangements. Each Magnet Rocker TM speaker includes a small loop fitted to the carabiner which you can use to attach the units to other fixtures. Try using the carabiner to hook a Magnet Rocker TM onto your belt loop or backpack strap for easy, hands-free listening on the go.

Charging & Battery Information

For the quickest charging time, power off Magnet Rocker TM and use the included micro-USB cable to connect the speaker to a USB power adapter (DC 5V 2A, not included) connected to a power outlet, or your computer (powered on).
The LED (located to the left of the Power Button) will appear solid red when charging, even if the speaker is powered off. The LED will turn off when charging is complete. When the Magnet Rocker TM ’s battery is low, the LED will flash red three times every 60 seconds; If voice prompts are turned on, you will also hear “Battery Low”. If no audio is played through the Magnet Rocker TM speaker for 15 minutes, the unit will power off automatically to save energy.

Features

| Power Button: Press and hold to turn Magnet Rocker TM  on and off. Double- press to turn voice prompts on and off.
---|---
| Play/Pause: Press to play audio if it is paused or pause audio if it is playing.
**+**
**-**| Volume Up/Down: Press + to increase audio volume. Press – to decrease audio volume. See Bluetooth Connecting with Magnet Rocker TM for more functions.
| Aux Input: Connect an audio player here with an 1/8” (3.5 mm) auxiliary cable.
| Micro-USB Charging Port: For fastest charging, power off Magnet Rocker TM and use the included micro-USB cable to connect the speaker to a USB power adapter (DC 5V 2A, not included) connected to a power outlet or your computer (powered on).

Operation

Bluetooth Connecting with Magnet Rocker TM Connecting to one speaker:

1. Power on the speaker by holding down the Power button for 2 seconds. Magnet Rocker TM will automatically enter Bluetooth pairing mode.
2. Navigate to your device’s Bluetooth setup screen, find Magnet Rocker, and connect. When connected, the Bluetooth LED will be lit solid blue. If voice prompts are enabled, you will hear “Bluetooth Connected”. Tip: We recommend renaming each speaker in your device’s Bluetooth settings so that you can distinguish between the two.
3. Press play on your device’s music player. Press the + and – buttons to adjust volume. Press and hold the + or – buttons to navigate Bluetooth tracks.
4. To disconnect, press and hold the + and – buttons simultaneously. The LED will go from solid to flashing blue and then off. If voice prompts are enabled, you will hear “Bluetooth Disconnected”.

Stereo-Link speakers: TM : pairing two Magnet Rocker TM

1. Power on both Magnet RockerTM speakers.
2. Connect to one Magnet Rocker TM speaker using the steps above. This will be the “primary” speaker.
3. Be sure to disconnect any Bluetooth devices from the secondary speaker before attempting to connect to the primary speaker.
4. Press and hold the + and – buttons on the secondary speaker to link to the primary speaker. The Bluetooth LED will flash blue and then change to solid green to indicate that a connection has been established. If voice prompts are enabled, you will hear “Stereo-Link Mode”. These two speakers will now automatically link the next time both are powered on and in range of one another.
5. If you are having trouble linking, disconnect all Bluetooth devices first, and then connect after the speakers have been linked. Tip: Magnet Rocker TM speakers should be within 16’ (5 m) of each other to properly sync. The closer the speakers are, the faster they will sync.
6. To break the link between two speakers, press and hold the + and – buttons once to disconnect the Bluetooth device, and then again to de-link the speakers.
   Note: Powering off the primary speaker while in Stereo-Link TM mode will also power off the secondary speaker.

Connecting an Audio Player with the Aux Input

1. You can also connect an audio player to the Magnet Rocker TM speaker by connecting an aux cable to the audio source and then the speaker’s 1/8” (3.5mm) input. If the speaker is in Bluetooth mode, connecting an aux cable will switch the speaker from Bluetooth to Aux mode. The LED will turn solid white to indicate Aux mode. If voice prompts are turned on, you will hear “Auxiliary Mode”.
2. Use the + and – buttons to adjust the speaker’s volume in Aux mode. Note that this volume control is independent of the Aux source’s native volume and volume controls.
3. To exit Aux mode, simply disconnect the aux cable and the speaker will revert to Bluetooth mode.

Troubleshooting

If the unit is not charging: Make sure the micro-USB cable is properly connected to the power input, the power adapter and the power outlet. If the sound is distorted: Try lowering the volume control of your sound source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to Magnet Rocker TM via Bluetooth:

• Have your audio device (e.g., smartphone or tablet) and Magnet Rocker TM speaker as close together as possible while trying to connect. Make sure both the audio device and Magnet Rocker TM Speaker are unobstructed by walls, furniture, etc.
• Reset the Bluetooth connection on Magnet Rocker TM speaker to disconnect Magnet Rocker TM speaker from any other audio device and restart the search process. If this does not work right away, power off Magnet Rocker TM Speaker and then power it back on. See Bluetooth Connecting with Magnet Rocker for more information.
• Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You can find this under the Bluetooth menu in the Settings for your phone or other audio device. If this does not work, and you have connected to Magnet Rocker TM TM Speaker before, find Magnet Rocker TM peaker in the list of available or previously connected devices in your audio device’s Bluetooth menu, tap the “gear” or “i” icon located next to it and then select Unpair or Forget this device. Turn Magnet Rocker TM speaker off and back on and try pairing again once it reappears in your available devices list.

Note: If Magnet Rocker TM Speaker has been paired to another audio device recently that is still within range, you may need to repeat this process with that audio device to fully disconnect.
If you experience audio dropouts while playing music from a Bluetooth device , this may be happening because your unit is trying to link to another speaker. This can occur if you power off a speaker that was linked to your unit or if you have just turned on your unit and it is in Stereo-Link TM mode. To stop the audio dropouts, exit Stereo-Link TM mode by doublepressing the Link button. Alternatively, you can wait for your unit to link to another Magnet Rocker TM Speaker if there is one within range. If there is a delay in the audio signal between the left and right speakers when linked, break the link by double-pressing the Link button, and pair them again following the instructions in the Stereo-Link TM : pairing two Magnet Rocker TM speakers section.
If you would like to stop your speaker from automatically linking when you power it on, make sure you Press and hold the + and – buttons to exit Stereo- Link TM mode before you power it off.

Appendix

Technical Specifications

Range: Up to 100 ft. (30.5 m) *
Stereo-LinkTM Range: Up to 50 ft. (15 m) between speakers
Water Resistance Class| IPX5
Battery| Battery life: Up to 12 hours (at 50% volume) **
Charge Time: Up to 2 Hours (using 5V, 2A USB power adapter)
Dimensions (width x depth x height)| 3.86″ x 2.13″ x 3.86″ (98 mm x 54 mm x 98 mm) (per speaker)
Weight| 0.6 lbs. (0.27 kg) (per speaker)

Specifications are subject to change without notice.

• Bluetooth and wireless reception and range are affected by walls, obstructions, and movement. For optimal performance, place the product so it is unobstructed by walls or furniture and is raised off the ground.
  ** Battery life may vary based on temperature, age, and volume usage of product.

Trademarks & Licenses

ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.

Manual Version 1.0
ionaudio.com

References

• Sound Experiences | ION Audio
• Support : ION Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>