iRoom iO iTop Light Tabletop iPad Docking Station User Manual

iRoom iO iTop Light Tabletop iPad Docking Station

Introduction

Thank you for purchasing iRoom‘s iTop tabletop docking station.
This MANUAL is designed to guide you through the hardware installation and initial software configuration.
The warranty terms are also included in this MANUAL.
For details on configuring iRoom‘s iTop, to download the TCP-interface description, latest drivers, latest FAQ‘s or user manuals in other languages, please visit: www.iroom.io

Package content

Quick Start Guide

Installation:

How to Dock:

Motion Sensor (iTop Pro & iTop Plus):

Icon change (iTop Pro & iTop Plus):

Securing to surface:

Specifications

• Type iTop Light / iTop Pro / iTop Plus

• Dimensions (WxHxD) 280mm x 160mm x 138mm / 11“ x 6.3“ x 5,3“

• Power Options PoE+ Injector(IEEE 802.3at) included. Alternatively 110-240VAC

• LAN Communication 10 Mbps, TCP/IP, Status & Control

• Digital Inputs / Outputs 9 DI (contact closure) / 1 DO (relay; 30VDC, 1A / 125VAC, 0.3A)

• Functionality
  Store and Charge the iPad; AV & HVAC Control, Environment Monitoring via Sensors for Room Temperature, Humidity, Light Level and Air Quality (Q1/2023)

• Intelligent Glass Bezel (iTop Pro & iTop Plus) 6 touch buttons (with customizable icons) / 1 motion sensor

• Anti-Theft Protection (iTop Plus) Code-protected removal of the iPad

• Audio Output 3,5 mm audio jack analog stereo / adjustable Line-Out

• USB Port (iTop Pro & iTop Plus) For USB-C accessories. 5V/1A max.

• Operating Temperature 0 – 35°C or 32 – 95°F

• Operating Humidity 20% – 90% RH non-condensing

• Weight 2,2 kg / 4.85 lbs

Cleaning

The product requires no special care, but only a regular cleaning of the glass. Do not use any abrasive/harsh cleaners and unplug power supply before cleaning. For general cleaning of the surfaces please use a soft cloth with screen cleaner. If possible frequently change the cloth so that no dust particles get stuck in the towel causing scratches.

Main Board Schematic
Before installation please become familiar with the main PCB of your docking station.

Relay & Terminals

• Relay0 Contact Rating (resistive)
  30VDC, 1A / 125VAC, 0.3A

• Terminal Specifications
  (9 x DI / 1 x DO)
  26-20 AWG / 0.13-0.52 mm²

Basic Configuration
To configure iRoom‘s iTop Pro and iTop Plus access it via a docked iPad using the free iOS App „iRoom‘s iDock“.

• Default IP: DHCP
• Default Access-Code: iBezel

iOS App Store & App iRoom‘s iDock

• Open iOS App store and search for App „iRoom‘s iDock“
• Install App „iRoom‘s iDock“
• Open App „iRoom‘s iDock“
• Dock the iPad into iRoom‘s iTop
• Verify status „online“ (indicates successful docking procedure)

For additional details on the iRoom‘s iDock App, please refer to the „in App Help“ and the in App FAQ area.
As we perform frequent iOS-App-updates the visual appearance might change.

Default Unlock PIN
Press and hold any two Quick Keys until the green LED starts flashing. Enter PIN and confirm by pressing the Quick Key with the green LED.

Default PIN: 1234
Please change Access Code & TouchCode PIN during configuration to avoid unauthorized iPad removal.

Restoring the Default Configuration and Password
Use the „restore to factory setting“ function of the iRoom‘s iDock iOS-App

• Access-Code is required

1. MAIN MENU
   Main Function Selection Area

2. SUB MENU
   Setting Adjustment and Configuration section

3. in App HELP AREA
   Selecting text in Sub-Menu shows affiliated help

4. App & Firmware Version
   Displays App Version number and Firmware Version installed on your iTop (if comm. status is online)

5. Communication Status
   Displays iTop Communication status (online/offline)

Lock
Pull the steel bar out, turn the lug forward and move the steel bar back until the lug secures the iPad.

1. TouchCode Functionality
   For activating the iPad lock.

2. Changing TouchCode PIN
   Enter desired 4-digit PIN and confirm by pressing the green button.

3. Time delay for Automatic Lock
   Once the lock is released, it automatically relocks after a set time.

Unlock
Press and hold any two buttons on the iTop faceplate (Quick Keys) at the same time until the green button starts blinking. Enter the 4-digit PIN (you’ve set before – see above) and confirm by pressing the green button. The red button starts blinking. This indicates that the lock is released now. After a defined time, it relocks itself automatically. By pressing the red button, you can relock manually.

• In case you entered the wrong PIN, you will hear a double beep. Start over and enter the correct PIN.
• In case you notice any mistyping while entering the code, you can start over by pressing the red button.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by an authorized service technician.

Protection against Theft
iRoom’s iTop Plus provides a locking mechanism for the iPad. However, the locking mechanism does not provide any protection against theft. Unauthorized and/or forceful removal of a tablet cannot be prevented. Eltako AustriaGmbH does not accept any liability for the theft of an iPad!

IT-Security
In order to the open an unsecured communication protocol used by iRoom‘s iTop the user is responsible to ensure proper network security to avoid unauthorized LAN Control of iRooms iTop.

Limited Warranty

Eltako Austria GmbH warrants that the product(s) furnished hereunder shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase made by the original end-customer or for a period of 3 years from the date of shipment by Eltako Austria GmbH under normal use and operation.
Eltako Austria‘s GmbH sole and exclusive obligation and liability under the foregoing warranty shall be for Eltako Austria GmbH, at its discretion, to repair or replace any product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any product is not included in this warranty. The warranty period of any repaired or replaced product shall not extend beyond its original term.

Returns
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from Eltako Austria GmbH or during the warranty period, and the Products being received at Eltako Austria GmbH facility freight prepaid in accordance with the RMA process of Eltako Austria GmbH. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.iroom.io/support/warranty.

Warranty Conditions

The above warranty does not apply if the product:

1. Has been modified and/or altered, or an addition made thereto, except by Eltako Austria GmbH, or Eltako Austria GmbH authorized representatives, or as approved by Eltako Austria GmbH in writing;
2. Has been painted, rebranded or physically modified in any way;
3. Has been damaged due to errors or defects in cabling;
4. Has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident.
5. Has been damaged or impaired as a result of using third party firmware;
6. Has no original serial number label, or is missing any other original label(s);
7. Has not been received by Eltako Austria GmbH within 30 days of issuance of the RMA.
   In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

RoHS/WEEE Compliance Statement
This symbol was placed in accordance with the European Union Directive 2011/65/EU on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.

Declaration of Conformity

Hereby, Eltako Austria GmbH, declares that this Eltako Austria GmbH device, is in compliance with the essential requirements and other relevant provisions of Directive 2014/35/EU & 2014/30/EU..

Subject to changes at any time. The technical details and specifications do not equate to any form of guarantee.
All products mentioned protected by international copyright and patent laws.

Apple and iPad are registered trademarks of Apple Inc. Due to periodic product improvement, all features and specifications are subject to change without notice. The tablet is NOT part of the scope of delivery!

Eltako Austria GmbH
Ziegeleistrasse 13 5110 Oberndorf Austria
Seite 13

Web: www.eltako.com | www.iroom.io
Email: office@eltako.at
Phone: +43 6272 20628

References

• Home » Eltako
• iRoom iO - intelligente Technik für dein Zuhause

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>