MERCATOR A19911 Tempo 10W LED Task Lamp Instructions
- June 5, 2024
- MERCATOR
Table of Contents
MERCATOR A19911 Tempo 10W LED Task Lam
PRODUCT OVERVIEW
Please note the following safety precautions:
This appliance is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to ensure
that they can use the appliance s.afely.Young children should be supervised to
ensure that they do not play with the appliance.
if the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified person in order to avoid a hazard.
To prevent damage to the appliance do not use alkaline cleaning agents when
cleaning. Use asoft clothanda mildde tergent.Always switch it off before
cleaning.
Failure to maintain the lamp in a clean condition could lead to deterioration
of the surface 1hatcouldadverselyaffect the life of the appliance and
possibly1esultina hazardous situation
This product is not repairable. if any parts are broken, the whole unit should
be replaced.
THE MAXIMUM OUTPUT OF THIS USB CHARGER IS SV 1A. THIS PRODUCT
IS NOT SUITABLE FOR CHARGING HIGH-POWERED PRODUCTS SUCH AS TABLETS. THE
CONNECTION OF ANY DEVICE REQUIRING MORE THAN THE MAXIMUM AVAILABLE OUTPUT MAY
CAUSE DAMAGE TO THE PRODUCT OR THE DEVICE IN USE.
Specifications:
INSTALLATION
Operation:
Smart Alarm Settings (Gradual Wake Up)
This task lamp is equipped with a smart pre-alarm setting. This pre-alarm will go off before the main alarm and replicates birds tweeting and gradually turns on the light. This pre-alarm can be set at2,5,10 or 15-minute intervals before the alarm and will continue to sound each minute before the main alarm.See instructions below
- After the alarm has been set, press the BIRD TWEETING ALARM” button on the light control panel to begin setting a gradual alarm.
- Tap between the settings below, and adjust using the PLUS w and “MINUS buttons.
- Press the BIRD TWEETING PRE-ALARM button again to confirm pre-alarm.
- The music icon on the screen will be blinking when the pre-alarm is active and will continue to sound daily
- When the pre-alarm rings, turn off by pressing the “CALENDAR /TIME SETTINGS button on the control panel
- To cancel the pre-alarm, press the “BIRD TWEETING PRE-ALARM” button.
Using yourTempoTask Lamp
To turn on the lamp, gently tap the OFF /ON switch.
Dimmable Lamp and Colour Changing Modes
To adjust the brightness, gently tap and hold the “DIM DOWN and DIM UP 1. To adjust the brightness, gently tap and hold the “DIM DOWN [S’.] “and DIM UP [2S]
Calendar Settings
To adjust the calendar settings press the “CALENDAR/TIME SETTINGS to begin time setting mode- Tap between the settings below, and adjust using the PLU5 and “MINUS buttons
Alarm Settings
Press the ALARM SETTING button on the light control panel to begin setting an alarm- Tap between the settings below, and adjust using the PLUS and MINUS buttons.
- Press the “ALARM SETTING button to confirm the alarm.
- The alarm icon on the screen will be blinking when the alarm is active and will continue to sound daily.
- When the alarm rings, turn off by pressing the”CALENDAR /TIME SETTINGS button on the control panel.
- T cancel alarm,pressthe ALARM SETTING button
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>