VONROC PS505XX Circle Garden Sprinkler Instruction Manual
- June 10, 2024
- VONROC
Table of Contents
VONROC PS505XX Circle Garden Sprinkler
Product Information
The Pulse Sprinkler PS505XX is a device used for watering plants and lawns. It has a deflector shield, diffuser pin, collar clamps, trip pin, water supply connection, and multiple connection features. The numbers mentioned in the text refer to the diagrams on page 2-3. The device is available in different models with varying operating pressure and size spray nozzle. The maximum spray range and area coverage depend on the model.
SAFETY INSTRUCTIONS
Before using the Pulse Sprinkler, carefully read and follow all safety instructions mentioned in the user manual. Keep the device out of reach of children.
| Model no. | PS505XX |
|---|---|
| Operating pressure | Minimum 2.0 bar |
Maximum 6.0 bar
Size spray nozzle| 4.0 mm
Max. spray range| ≤ Ø 24 m, 450 m²
Area coverage| 0° – 360°
DESCRIPTION
The numbers in the text refer to the diagrams on page 2-3.
- Deflector shield
- Diffuser pin
- Collar clamps
- Trip pin
- Water supply connection
- Multiple connection
OPERATION
Connect the device to a water supply using the water supply connection. Adjust the collar clamps to set the desired spray angle. Use the diffuser pin to adjust the water flow rate. The trip pin can be used to set the sprinkler’s rotation angle. Turn on the water supply and adjust the water pressure to achieve the desired spray range and coverage.
The text will refer to the diagrams A to E on page 2.
- Adjusting the deflector shield(1) will set the spray distance. Raising the deflector shield completely will result in the maximum spray distance. Lowering the deflector shield into the water spray will reduce the spray distance.
- The diffuser pin(2) can diffuse the water jet. Screw the pin in a clockwise direction so the pin will disrupt the water jet. This will create a shower-like spray pattern. For a more con-centrated water jet which will spray further, unscrew the pin all the way.
- The sprinkler head will move between the two collar clamps(3). Adjusting the clamps will set the spray area coverage.
- Flip the trip pin(4) to the up position for a full 360° coverage.
- Connect the water supply connection(5). To connect multiple units(6) use an extra water tap connector ¾”and attach an additional hose and sprinkler.
Points of attention.
- Pulse sprinklers require a minimum water pres-sure of 2 bar. Without adequate pressure, the sprinkler head will not rotate properly.
- Additional units will reduce the maximum cov-erage area of all sprinklers!
- Coverage area may vary depending on local water pressure and water flow rate.
- Hose length and hose diameter will affect water pressure and flow rate.
WARRANTY
VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this guarantee:
- Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
- Normal wear and tear;
- The tool has been abused, misused or improperly maintained;
- Non-original spare parts have been used.
This constitutes the sole warranty made by compa-ny either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the im-plied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.
The product and the user manual are subject to change. Specifications can be changed without further notice.
©2022 VONROC
WWW.VONROC.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>