Robinhood HEF302TCOM 30cm Ceramic Cooktop Black Instruction Manual
- June 10, 2024
- Robinhood
Table of Contents
HEF302TCOM 30cm Ceramic Cooktop Black
Installation and Operating Instructions
Issue: 2
Description: Model Number:
ROBINHOOD 30CM CERAMIC COOKTOP BLACK HEF302TCOM
Contents
Congratulations! Thank you for choosing one of our appliances. Before you use
the appliance, we strongly recommend that you read through the whole user
manual which provides important safety instructions and description of the
product and the proper use of its functions. To avoid the ever-present risks
involved with using an electrical appliance it is vital that the oven is
installed correctly and that you read the safety instructions carefully to
avoid misuse and hazards. It is important that you retain these instructions
and your proof of purchase along with any other important documents about this
product for future reference. Due to continual product development, Robinhood
reserves the right to alter specifications or appearances without notice.
Important Safety Instructions ………………………………………………………………………………………………………………1
Product Description …………………………………………………………………………………………………………………………….2
Installation Instructions ……………………………………………………………………………………………………………………….3
Operating Instructions…………………………………………………………………………………………………………………………6
Troubleshooting ……………………………………………………………………………………………………………………………… 11
Maintenance and Cleaning……………………………………………………………………………………………………………….. 12
Warranty Certificate (New Zealand)…………………………………………………………………………………………………… 13
Warranty Certificate (Australia) ………………………………………………………………………………………………………… 14
Disposal Information
· Most of the packing materials are recyclable. Please dispose of these
materials through your local recycling depot or by placing them in appropriate
collection containers.
· If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
Important Safety Instructions
IMPORTANT: Read the assembly instruction section and safety precautions of
this booklet carefully before removing the contents of this carton.
1. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
or knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
2. After removing the packaging, make sure to check if there is any damage to
the appliance. If there is any damage (including cracked glass), never attempt
to use the appliance and immediately contact your Authorized Service Centre.
As packaging materials can be dangerous to children, they need to be collected
immediately and put out of reach.
3. In certain circumstances electrical appliances may be a danger hazard.
Check the conformity of voltage and power settings, which are specified on the
information plate attached to the appliance and/or packaging, with the usage
conditions available.
4. Do not place heavy objects in or on these appliances, use for storage or
as a cutting surface. This appliance is designed for cooking food only. Use
flat based, stable cooking pots only.
5. This appliance is designed for domestic household use only and for the
cooking of domestic food products. Use as a commercial appliance will void the
warranty. It should not be used in a marine environment or outdoors and must
be fully built in. Do not use the appliances until fully installed.
6. A means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules. 7. The electrical connection must be
accessible after installation. The appliance must be electrically isolated
before any
maintenance can be performed. 8. The appliance is not intended to be operated
by means of an external timer or separate remote-control system. 9. Electrical
connection must be made as per local wiring rules and regulations. Do not
disconnect the appliance with wet
hands or bare feet, and do not disconnect the power cord with extreme force.
10. Ensure that the kitchen is well ventilated or mechanical ventilation is in
use while cooking on this appliance. 11. Do not store or use flammable
materials or aerosols near the cooktop. Items made from aluminum, plastic or
plastic
film should also be kept away from the appliance, as they may fuse to the
surface. 12. WARNING The surface temperature of this appliance exceeds 95°C.
To avoid a hazard, under bench access must
be restricted. Aboard must be installed underneath the cooktop. 13. WARNING –
The cooktop will become hot during and directly after use. Do not touch the
surface during this time, as
it may be hot and can cause burns. To avoid burns, children should be kept
away. 14. Cleaning may only be commenced on the appliance once it has cooled
down and is turned off. Do not use a steam jet
or any other high pressure cleaning equipment to clean the appliance. 15. When
the appliance is not being used, turn the appliance off. 16. Where this
appliance is installed in a caravan, it shall NOT be used as a space heater.
17. Do not modify this appliance. 18. Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the glass surface as they can scratch the
surface,
which may result in the glass shattering. Clean the glass using a warm damp
cloth (e.g., dishcloth) and dry it with a soft dry tea towel. 19. All
cabinetry and materials used in the installation must be able to withstand a
minimum temperature of 100°C above the ambient temperature of the room it is
located in, whilst in use. Certain types of vinyl or laminate kitchen
furniture are particularly prone to heat damage or discoloration at
temperatures below the guidelines given above. Any damage caused by the
appliance being installed without adhering to the temperature limits set out
above will be the liability of the owner. To avoid any hazards, limit access
to the under-bench section of the cooktop. 20. The appliance must be installed
and put into operation by an authorized technician under the conditions
provided by the manufacturer in this manual. The manufacturer cannot be held
responsible for any damage that might occur due to faulty installation. 21.
Damage can occur to bench tops if pots and pans are allowed to overlap the
bench top. This can result in heat being transferred to the bench top. Ensure
that correct sized pots & pans are used. Cast iron and cast aluminum cookware
with damaged bases may scratch the cooktop surface if they are dragged across
it. Pans should be lifted on and off the cooktop surface and not dragged.
Cooking zones should not be switched on without cookware placed on it. Also,
the cookware should not be empty for any length of time. 22. If any cracking
is noticed on the vitro-ceramic cooktop, turn the appliance off immediately
and call your Authorized Service Centre. 23. Do not leave the cooktop while
cooking with solid or liquid oils. There may be flaming up in conditions of
extreme heating. 24. Never pour water onto the flames occurring from oil.
Immediately turn the cooktop off and cover the pan with a lid or fire blanket
in order to smother the flame. 25. The ceramic cooker hob must be installed by
qualified personnel or technicians. We have professionals at your service.
Please never conduct the operation by yourself. 26. The ceramic cooker hob
shall not be mounted to cooling equipment, dishwashers and rotary dryers. 27.
The ceramic cooker hob shall be installed such that better heat radiation can
be ensured to enhance its reliability. 28. The wall and induced heating zone
above the work surface shall withstand heat. 29. To avoid any damage, the
sandwich layer and adhesive must be resistant to heat. 30. A steam cleaner is
not to be used. 31. Caution: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
1
Product Description
Model Voltage Rated Power Element Zones
HEF302TCOM 220-240VAC ~50Hz 2900W 2
M1= Cooking zone 1 selection M2= Cooking zone 2 selection M3= Plus button: For adding time and power level M4= Child safety lock button: Press and Hold to lock or unlock the control panel M5= Time selector: Timing for each Cooking zone M6= Minus button: For reducing time and power level M7= Power button: Press and hold to turn Off or turn on the hob
Technical Information
Cooking Zones ( Ø mm, kW )
Small Hob: Big hob:
1200W 1700W
Total power: 2900W
1- Cooking zone indicating digital tube: Display the power level , high
temperature warning symbol etc.
2- Cooking zone indicating digital tube: Display the power level , high
temperature warning symbol etc.
3- Timer digital tube : Display the time , child safety lock symbol etc.
2
Installation Instructions
· Kitchen furniture and cabinetry that is in direct contact with the appliance
must be heat resistant to a minimum temperature of 100°C.
· The appliance can be installed on a work surface with a thickness of between
30 and 40 mm and near to walls which are higher than the work surface, and the
rear of the appliance should be 40mm minimum away from the wall and keep 100mm
minimum away from the side wall or cabinet.
· Carry out all cutting of the unit and work surface then carefully remove
shavings or sawdust before inserting the appliance.
· To ensure correct ventilation of the hob please comply with the dimensions
shows in the figures. · Ensure that the surface is level and square and that
nothing interferes with the space required for
installation. · Prepare the cut as indicated (see installation dimensions).
3
Installation Instructions
Installing the Cooktop
Note: Before proceeding with installation read the work instructions
carefully. 1. Place a towel or cloth on the work surface. Place the cooktop
face down on the protected surface. 2. Apply the strip seal, supplied with the
hob, which is for sealing it onto the work surface. Do not use silicone. Apply
the seal to the edge of the bottom of the cooktop, leaving about 3mm from the
edge of the glass. Apply the seal all around the circumference. Cut off any
excess and bring the two ends of the seal together so they match. 3. Fix the
brackets (4 or 5 pcs) on the front side and rear side by screw. Put the
cooktop in the cut-out and make it centered. Ensure that the front edge of the
cooktop is parallel to the side edge of the work surface.
· IMPORTANT: You must observe the ventilation requirements shown in the figure
below. · IMPORTANT: There are ventilation holes around the outside of the
cooktop. YOU MUST ensure that these
holes are not blocked by the benchtop when you put the cooktop into position
(see figure below). · IMPORTANT: Do not use a silicon sealant to seal the
appliance against the benchtop. This will make it
difficult to remove the cooktop from the benchtop in the future, particularly
if it needs to be serviced.
4
Installation Instructions
Electrical Connection
Before connecting the appliance, ensure that the supply voltage marked on the
data label corresponds with your mains supply voltage. WARNING: This appliance
must be earthed. Ensure that the power supply cable does not exceed a
temperature of 50°C. If the power supply cable is damaged, it must be replaced
with an identical one which can be obtained from customer service. The power
supply must be replaced by a qualified and authorized person. Warning: This
appliance must be installed by a qualified electrician or authorized service
provider. Remember to connect the safety circuit to the connection box
terminal marked with .The electricity supply for the ceramic hob must have a
safety switch which enables the power to be cut off in case of emergency.
· The cable connections must be in accordance with the diagram located on the
bottom of the hob. · The cable type must be connected to the corresponding
power supply terminal box. · You should use a good quality screwdriver to
carefully, fully tighten ALL of the terminal screws. · If, when the hob is
first switched on, only two of the zones work you should recheck that the
terminal
screws are all fully tightened. This should be done before contacting the
Customer Care Department. · IMPORTANT: The appliance must NOT be connected to
the mains supply by means of a 10A plug and
socket. · The cable can be looped, if necessary, but make sure that is not
kinked or trapped when the hob is in
position. Care must be taken to avoid the cable being in contact with hot
parts of the appliance.
5
Operating Instructions
First Time Usage
IMPORTANT: You should clean the ceramic hob surface (see “Maintenance and
cleaning” section). Turn each element on, one at a time, and leave them to run
at full heat for five minutes. This will help to eliminate any new smell that
exists and evaporate any humidity that has formed on the heating elements
during transit. Only do this for one element at a time. Place a saucepan half
filled with cold water on the element during this process.
Operation
POWER ON After switch on the appliance, the hob will beep for once to remind
power on, all of the indicator digital tubes on the display screen will lit on
for 2s, then the appliance goes into shutdown mode. Note: If your hob with
multi-ring, the corresponding indicator digital tube decimal point ” ” will
lit on. If your hob with single ring only, the digital tube decimal point ” ”
will not lit on.
SHUTDOWN STATUS
All the display will close except the high temperature warning symbol ” “; At
this time, only the power button ” ” can operated by pressing and holding, and
other button operations are invalid.
STANDBY MODE
· Under shutdown status, press and hold ” standby mode.
” button for 3s, the hob will beep for once and then enter
· All the indicator digital tubes of the cooking zone will display ” “(The symbol ” ” will show in the
cooking zone indicator if there is residual heat), timer place will show ”
” as well, it will not heat at
this time.
· Under standby mode, if no cooking zone heating operation, the appliance will go into shutdown status
automatically after 10s and beep once.
HEATING CONTROL
· Under standby mode, you can choose the cooking zone by pressing the cooking
zone select button, then press plus or minus button to adjust the power level
of the corresponding cooking zone. Press and hold plus
” ” or minus ” ” buttons can continuously to increase or decrease the power
level. · When the hob top is in heating status, press and hold ” ” power
button for 3s to switch off, and stop all the
cooking zones to heat. The corresponding cooking zone indicator of the hob top
which has heated before will
display high temperature warning symbol ” “. · Under standby mode, if some hob
tops still exist residual heat, display will show ” “. · If needing to switch
off one of the cooking zones, you can select that zone first, then press the
minus button
” ” until “0” power level to switch off that zone and will not affect the
heating of the other cooking zones. When power level reaches “0”, the
corresponding cooking zone indicator of the hob top which has heated before
will display high temperature warning symbol ” “. · If more than one zone is
operating at the same time, total power will equal to the sum of the powers of
all the working cooking zones, each cooking zone will work according to their
power modulation ratio and will not affect each other.
Note: · During the same period, only one hob top button is valid, that is only
one decimal point can be displayed.
· Press minus button ” “to set the power level to “0”, then the heating hob
top will close automatically.
6
Operating Instructions
MULTIPLE RING HEATING
Open the multiple ring heating: The outer ring can only be started when the
inner ring is opened. 1- Press the burner select key for heating, the
corresponding burner indicator digital tube point ” ” flashing display. 2-
Choose the required power gear by the increase or decrease button. 3- Press
the burner selection key again, then the burner fire indicator digital tube
will display the single-ring icon ” “, then press the burner selection key
again to open the outer ring of the burner, when the outer ring is opened, the
corresponding burner fire indicator digital tube will display the double-ring
icon” “.
Open the third ring for heating: the outer ring can only be started after the
inner ring is opened. 1- Press the burner selection key to be heated, and the
corresponding burner fire indicator digital tube decimal point ” ” flashes. 2-
Choose the required power gear by the increase or decrease button. 3- Press
the burner selection key again, then the burner fire indicator digital tube
will display the single-ring icon ” “, then press the burner selection key
again to open the outer ring of the burner, when the outer ring is opened, the
corresponding burner fire indicator digital tube will display the double-ring
icon” “. 4- When set up after the start-up burner inner heating furnace head
gear, press the furnace head button for the first time the inner ring continue
to work, the second press furnace head key when the inner ring and the second,
third time to press the furnace head key inner ring, the second and third ring
road, all the work, for the fourth time to press the furnace head heating
button, to stop the second and third ring, internal ring continue heating.
Turn off the Multiple ring heating: 1- When all outer rings of a furnace have
been opened for heating, press the corresponding furnace selection key, and
the corresponding furnace fire indicator digital tube decimal point ” ”
flashes. 2- Once again, press the burner selection key to close the outer ring
for heating, and then the innermost ring of the burner continues to heat.
POWER LEVEL ADJUSTMENT
1- Under the standby mode, press cooking zone select button to choose the
corresponding cooking zone, corresponding cooking zone digital tube decimal
point ” ” and heating level will display. You can press the plus ” “and minus
” ” buttons to adjust suitable power level.
2- By holding down either of these buttons, the value on the zone indicator
will adjust up or down. Each pressing ” ” button, power level will add one,
until level 9, and displayed on its corresponding digital tube. Each pressing
” ” button, power level will reduce one, until level 0(Each pressing of “+” or
“-” button, a short audible signal will be heard).Keep pressing ” “, ” ”
buttons will make continuously increasing or decreasing effect.
3- Upon completion of power level adjustment, the decimal point ” “of digital
tube will stop flashing and normally display the power level within 10 seconds
of no operation.
4- When switching any of the cooking zone power level to 0, it will stop the
power output of that cooking zone. 5- If a cooking zone has been heated, power
level of all the cooking zone is “0”, the appliance will
automatically enter into shutdown status after 1 minute of no operation.
AUTO-HEATING FUNCTION Turn on automatic heatingPress plus button to set the
power to level 9, then touch plus button ” ” to let the
power level alternately display ” ” and ” “. At this time, press minus button”
” to adjust the auto-heating level you need, such as level 6. In this
automatic heating process, the corresponding power level indicating digital
tube is
alternately display ” ” and ” “. Alternate display time is 2.5 minutes. Press
plus or minus button to set the power to level 9, then touch plus button ” ”
to let the power level alternately display ” ” and ” “.At this point, the
default timing has started. For example, after ” ” and ” “alternately display
for 10 seconds ,press the” ” to adjust the power level to level 6. The icons ”
” and ” ” will display for 2 minutes and 20 seconds. After 2 minutes and 20
seconds, the hob will turn to normal heating mode , corresponding power level
indicating digital tube will display ” “.
7
Operating Instructions
When setting the automatic heating function, the corresponding cooking zone
will be heated in level 9 for a period of time (heating time depends on the
subsequent reduction to several levels, the heating time of each level is as
follows), then continue working in the final adjusted heating level. For
example, set the heating level to 9th level
and activate the automatic heating function by pressing the ” ” key
(alternately display ” ” ” “).Then set the automatic heating function level to
level 6 by minus button ” “. In this setting, the cooking zone is heated by
level 9 for 2.5 minutes. The cooking zone indicating digital tube is
alternately display ” ” and ” “. Then continue heating at level 6, the digital
tube will display ” “.
The power level and time corresponding tables of auto-heating are as below:
Power Level
1
Fast-heating time (minutes)
1
2
3
4
5
6
7
8
9
3
4.8
6.5
8.5
2.5
3.5
4.5
5
Automatic heating level adjustmentWhen entering automatic heating mode, only
if auto-heating at max power
within 30s, press minus button ” ” can reduce the power. After more than 30
seconds, pressing the minus button
” “cannot reduce the automatic heating level, it will exit the auto-heating
mode. After more than 30 seconds, if it is still in the automatic heating mode
and the automatic heating level is less than
9th level, press the plus button ” ” to increase the automatic heating level,
and the system continues to be in the automatic heating mode.
For example, after entering the automatic heating mode, within 30 seconds
touch minus button ” ” to adjust auto-
heating level to level 8. The indicating digital tube will display ” ” and ”
“. And then reduce to level 7, the
indicating digital tube will display ” ” and ” “. At this moment, the hob is
still in the automatic heating mode. When more than 30 seconds, the level 7
cannot be reduced to level 6, the automatic heating mode can be exited, and
the
hob change to normal heating mode, the indicating digital tube will display ”
“. 6.5 When changing the automatic heating level, the elapsed time will be
automatically calculated into the time corresponding to the new automatic
heating level. For example, you have selected the automatic heating level to
be level 1 (1 minute), and after 30 seconds you change the level to level 4
(6.5 minutes). This automatic heating function will run accurately for 6
minutes (6.5 minutes minus 30 seconds).
6.6 Within 30 seconds of automatic heating mode operation, press the minus
button ” ” to adjust to a certain level, then the running time is counted in
the set level time.
For example, when the indicating digital tube ” ” and ” ” is alternately
displayed and has been running for 20
seconds. Press the minus button ” ” to adjust to 6th level, then the 20
seconds that have been run will be automatically counted in the 2.5 minutes of
the 6th level, while the 6th level will continue to run for 2.5 minutes minus
20 seconds, that is 2 minutes and 10 seconds. Then turn back to normal heating
mode.
Timer adjustment
After selecting the corresponding power of the cooking zone, press the time
button” “, the timer digital tube will display “00” and the decimal point on
the right will display ” “. At this time, the timing mode is entered, and the
timing time of the selected burner can be set; (The following operations are
required in in timing mode).
· If you want to cancel the timing, you can adjust the timing time to zero.
· The first time you press the plus button” “, the timing starts from 1
minute, after which you can press the plus or minus button to adjust the
timing time.
· Press the plus button” ” for each time, the buzzer will beep once, and the
heating time will be increased by 1 minute. The timing will be continuously
changed between 1-99minutes . The maximum adjustment to 99 minutes.
· Press the minus button ” ” for each time, the buzzer will beep once, and the
timing will be reduced by 1 minute. When the timing time is less than or equal
to 30 minutes, the continuous adjustment timing will
continuously change between 30-0 minutes; If the timing has been adjusted by
the plus button ” ” for
more than 30 minutes, press the minus button” ” to adjust the timing to 0, and
continue to change the timing continuously between 30-0 by the minus button.
8
Operating Instructions
· After the timer countdown is 0, the buzzer will continue to sound for 2 minutes, and you can press any button to turn off the beep.
Note:
1- If the timing of a certain cooking zone has been set, to change the time,
press the time button again to select the corresponding cooking zone, and then
enter the new time by plus and minus buttons.
2- After the cooking zone is selected, the timing setting cannot be made
before the cooking zone power is set, and the time button is invalid.
3- When the timing of a certain cooking zone is set for the first time, if the
cooking zone selection button corresponding to the cooking zone is pressed
when the timing is not confirmed, the timing of the cooking zone is cancelled.
4- When single or multiple cooking zones are working, the decimal point ” “of
the corresponding cooking zone is always displayed during the timing setting
process. When multiple cooking zones are working, if two or more cooking zones
have been set the time, the timing digital tube displays the minimum timing of
cook zone. The decimal point of corresponding cooking zone is always on. The
digital tube decimal point is extinguished until the countdown time is over.
SHUT DOWN
In the standby status or heating status, press and hold the power button” ”
for about 3 seconds, the buzzer will beep once, and the whole hob will enter
the shutdown status. If there is residual heat in the furnace surface of
heating zone at this time, the high temperature warning symbol ” “will be
displayed, indicates residual heat warning.
CHILD SAFETY LOCK BUTTON
· The control panel can be locked by pressing and holding the child safety lock button ” ” for 3 seconds whilst the appliance is under standby status or heating status. The safety lock icon will display. When the appliance switches off the safety lock icon will extinguish.
· Under the child safety lock mode, the ” ” will display and flash(1s/time). If the cooking zone has set the
time, the digital tube will display the time and ” ” alternately. If not, it will display ” ” and ”
”
· Under the child safety lock mode, you can unlock it by pressing and holding
the child lock button ” ” for about 3 seconds.
· In the child safety lock mode, except for pressing and holding the power
button to turn off, as well as press and hold the child lock button to unlock,
the other buttons are invalid.
Note: To avoid mis operation, if activate the safety lock by pressing the safety lock button, and the safety lock is not cancelled before the controller is switched off, the safety lock function will continue to be effective when the controller is switched on again. It will disable any of the other buttons except power button and child safety lock if not cancelling the safety lock.
MULTIPLE TIMER Timer can be timed to any burner separately; each burner’s timing time is independent of each other.
Furnace head at a time when a furnace head for timing to set operation, first
press the timer button ” “, the choice of furnace head corresponding fire
indication light up the decimal point” “digital tube, digital tube at the same
time, two to the right of the decimal point” light up” “, said the current
timing has been successfully set associated with the choice of furnace head.
At this time, the timing time can be adjusted by pressing Timing for more than
one burner the timing opening operation for each burner is the same as above.
Press the burner selection key of any burner, the two-digit digital tube
displays the fixed time value of the burner; When multiple burners are timed,
the timing time of different burners can be displayed by pressing the timing
key ” “.
When no burners are selected, the two-digit digital tube displays the burners
with the smallest fixed time value, and the corresponding firepower indicates
that the digital tube decimal point ” ” is always on.
9
Operating Instructions
DEFAULT TIMING All of the cooking zones have a default timing function. The cooking zones will automatically turn off after this time has elapsed. See the table below to see the times for the different power levels.
Power Level Default timing
1
2
3
4
5
6-9
6h
6h
5h
5h
4h
1.5h
HIGH TEMPERATURE WARNING
· Press and hold power button manually for 3s till switch off, the whole
appliance will stop heating, but the cooking surface still has high
temperature, the indicator digital tube of corresponding cooking zone which
stop heating will show residual heat warning symbol ” “, to indicate
corresponding cooking surface high temperature.
· As long as the cooking zone has heated before, the high temperature warning
symbol ” ” will display for 35 minutes continually after the hob turn off.
PROTECTION FUNCTION
· High temperature protection: When the temperature of the burner is too high,
the mechanical temperature limit protection device of the burner starts to
protect, stops heating, and resumes heating after the temperature drops.
· Residual heat protection: When the whole appliance stops heating, the
digital tube of the relative heating
zone will display high temperature warning symbol ” “, indicating that cooking
surface temperature is too high, please do not touch to avoid getting burned.
· Safety cut-off protection: For the models with plug, when cut off after 1S
at any time, the voltage between L/N of the plug should fall to below safe
voltage range. · Connection of display board and power supply board breakdown:
When the appliance is switched on, if the display board does not receive the
correct power board signal for 20 consecutive seconds, the timer digit digital
tube will display ” ” and all loads stop working. It will return to shut down
mode after 1
minute, and display will continuously show high temperature warning symbol ” ”
for the one which under residual heat protection.
How to use the Cooktop
Put the pot in the centre of the cooking zone. Use a pot with a flat bottom
with a diameter the same as the cooking zone.
Shut down: after using, please turn the knob to “OFF”, the hob will stop
heating. CAUTION!
· Ensure the heating plate is clean-a soiled zone does not transfer all the
heat. · Protect the plate against corrosion. · Switch off the plate against
corrosion. · Do not leave pans with prepared dishes based on fats and oils
unattended on the switched-on plate; hot
fat can spontaneously catch fire.
10
Troubleshooting
PCB board fault codes and solutions
When a PCB board failure occurs, the timer digital tubes on the display panel
always display the fault code, and all the burners that are being heated stop
heating, and automatically return to the shutdown state after 1 minute. For
the burners that have been worked, the corresponding digital tube continues to
display the high temperature
warning sign ” “. When the fault code appears, please refer to the scheme in
the following table to solve.
Fault code E1 E2
E3 E4 E5
Type of fault The display board does not receive the signal of power supply
board. The power supply board does not receive the signal of display board.
Power supply board relay failure 1. Display board NTC open circuit 2. Display
board NTC short circuit Display board NTC high temperature protection
Solution The communication line failure of power supply board or display board
can cause communication anomalies. Replace the display board first. If the
fault persists, replace the power supply board. Replace the power supply
board. Replace the display board.
Priority to replace the circuit board insulation silicone strip, if the fault
still exists to replace the display board;
11
Maintenance and Cleaning
Warning: Ensure that the cooktop is cool before cleaning or performing
maintenance. Disconnect the cooktop from the power supply before performing
any maintenance.
· Do not use sharp scrapers or abrasive cleaning agents on the cooktop as these can damage it. · Use a damp cloth and some washing detergent to clean the cooktop. Wipe it dry before use. · Always ensure that the cooktop is clean before and after use.
After each use
· Wipe the appliance over with a damp cloth. · Dry the appliance by rubbing
the surface with a clean cloth.
Cleaning table
Type of deposit
Remove immediately?
Sugar or food/liquid containing sugar
Yes
Tin foil or plastic
Yes
Fat splashes
No
Metallic discoloration
No
Water splashes or water rings
No
Remove when the appliance has cooled down?
What should I use to remove the deposit?
No
Ceramic hob scraper
No
Ceramic hob scraper
Yes
Ceramic hob cleaner
Yes
Ceramic hob cleaner
Yes
Ceramic hob cleaner
Important! The inside of the hob should only be washed with warm water and a
small amount of washing-up liquid.
Caution!
· Ensure the heating plate is clean-a soiled zone does not transfer all of the
heat. · Protect the hob against corrosion.
12
Warranty Certificate (New Zealand)
Terms and Conditions The following conditions apply in respect of the warranty
given in this certificate:
1. Monaco Corporation Limited (“Monaco”) warrants the following Robinhood
products against manufacturing defects and faulty materials, under normal use
and subject to the exclusions in this certificate, for a period of: ·
Rangehood, Ovens, Cooktops, Dishwashers, Refrigeration – 24 months from date
of original purchase for domestic use. · Uniduct 12 months from date of
original purchase for domestic use. · Ironing centre 12 months from date of
original purchase for domestic use. · Sinks sets 5 years on stainless steel
sink including draining bench from date of original purchase for domestic use,
6 months on all stainless-steel accessories, including wire rack, colander and
tray from date of original purchase for domestic use. · Laundry Tub – 5 years
on stainless bowl, 24 months on Tap, Cabinet and other components from the
date of original purchase for domestic use.
“Original purchase”, when used in this certificate, means purchase by the
customer directly from Monaco or one of its approved suppliers.
2. This warranty is limited to the repair or replacement, at our option,
within the warranty period of any component part which we at our discretion
determine to contain faulty materials or a manufacturing defect in breach of
this warranty. This warranty is subject to terms and conditions set out in
this certificate.
3. The warranty only applies within New Zealand. 4. The customer must produce
the original invoice or other purchase documentation as proof of the original
purchase date.
Warranty exclusions 1. The warranty does not apply where, in Monaco’s opinion:
· The defect is caused by misuse, wear and tear, dirt, fire or accidental
damage. The product has been repaired or serviced by an unauthorized person. ·
The product was not installed in accordance with our instructions. · The
product was purchased overseas or was not designed for use in New Zealand. The
product was not used, cleaned or cared for in accordance with our
instructions. · The product was used outdoors. 2. In addition, this warranty
does not extend to damage or defects which in our opinion, directly or
indirectly arise from or are due to: · Exposing the product to acidic or
corrosive materials or chemicals such as dyes, solvents, denture cleaner or
acetone; Using inappropriate household cleaning products such as abrasive
cream or powder cleansers, furniture polish, bleach, mentholated spirits,
drain cleaners, sugar soap, metal pads and strongly alkaline or acidic
cleaners. · Heat damage, including from washing the product at high
temperatures. · Impact or mishandling the product, including the impact caused
by objects scraped along, thrown or dropped on the product surface or
excessive weight being placed on the product. · Structural or support changes
in or affecting the building or the application where the product has been
installed. · Failure to clean or maintain the product as recommended; or any
other causes specified in the product information as being excluded from this
warranty. 3. Variations with the color or gloss within the product or any
ageing or fading of color, shine or gloss level over time are not covered by
this warranty. The warranty does not cover visual imperfections or blemishes
in the surface and edges of the product that were not brought to your
supplier’s attention at the time you inspected the product. 4. Costs incurred
on installation or removal of a product, or any reinstallation of a product,
or any associated costs, are not covered by this warranty. 5. Monaco will not
be liable for consequential or indirect loss or damage whatsoever and however
arising out of or in connection with the supply, performance or removal of the
product, including (but not limited to) loss of profit, loss of revenue, loss
of contract, loss of goodwill or increased cost of workings, even if due to
the negligence of Monaco or any of its approved suppliers, employees or
agents. 6. Charcoal filters and light bulbs are not covered by this warranty
7. This warranty and the statements contained in this certificate or other
documents given to you do not exclude, restrict or modify the application of
any term implied into this warranty by statute, provided that (to the extent
any statutory provision permits Monaco to limit its liability for a breach of
an implied condition or warranty) Monaco’s liability for such breach is
limited to the payment of the cost of replacing the product, repairing the
product or acquiring an equivalent product. 8. Subject to clause 5, our
obligations under this warranty are limited to those set out in this
certificate, and this warranty is expressly instead of all other warranties,
express or implied, including any implied warranty of merchantability or
fitness for a particular purpose and notwithstanding any course of dealing
between the parties or custom and usage in trade to the contrary.
Terms and conditions are subject to change.
13
Warranty Certificate (Australia)
Terms and Conditions
If you are a consumer under the Australian Consumer Law, our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
1. Shriro Australia Pty Limited (“Shriro”) also warrants the following
Robinhood products against manufacturing defects and faulty materials, under
normal use and subject to the exclusions in this certificate, for a period of:
· Rangehood, Ovens, Cooktops, Dishwashers, Refrigeration – 24 months from date
of original purchase for domestic use. · Uniduct 12 months from date of
original purchase for domestic use. · Ironing centre 12 months from date of
original purchase for domestic use. · Sinks sets 5 years on stainless steel
sink including draining bench from date of original purchase for domestic use,
6 months
on all stainless-steel accessories, including wire rack, colander and tray
from date of original purchase for domestic use. · Laundry Tub – 5 years on
stainless bowl, 24 months on Tap, Cabinet and other components from the date
of original
purchase for domestic use. “Original purchase”, when used in this certificate,
means purchase by the customer directly from Shriro or one of its approved
suppliers.
2. This warranty is limited to the repair or replacement, at our option,
within the warranty period of any component part which we at our discretion
determine to contain faulty materials or a manufacturing defect in breach of
this warranty. This warranty is subject to terms and conditions set out in
this certificate.
3. The warranty only applies within Australia. 4. For warranty service
outside of capital city metropolitan area or 30 km from nearest authorized
service agent you will be liable for
reasonable travelling expenses and the cost of transport of the product or
parts to and from the service agent 5. To make a claim under this warranty,
you must produce the original invoice or other purchase documentation as proof
of the
original purchase date. You must send your claim to Shriro Australia Pty
Limited, 104 Vanessa Street, Kingsgrove, NSW, 2208, within 7 days of any
alleged defect or failure of the product first becoming apparent. You are
responsible for the expense of making a claim under this warranty.
This warranty is given by:
Shriro Australia Pty Ltd, ABN: 28 002 386 129 Telephone: 1800 648 556
Facsimile: 1800 628 577 Email: customercare@robinhood.com.au
www.robinhood.com.au Attention: Customer Services Manager
Warranty exclusions
1. The warranty does not apply where, in Shiro’s opinion:
· The defect is caused by misuse, wear and tear, dirt, fire or accidental
damage. The product has been repaired or serviced by an unauthorized person.
· The product was not installed in accordance with our instructions. · The
product was purchased overseas or was not designed for use in Australia. · The
product was not used, cleaned or cared for in accordance with our
instructions. · The product was used outdoors.
2. All Robinhood Rangehoods are suitable for indoor use only and not suitable
over BBQs or charcoal cookers designed for outdoor use.
3. In addition, this warranty does not extend to damage or defects which in
our opinion, directly or indirectly arise from or are due to: exposing the
product to acidic or corrosive materials or chemicals such as dyes, solvents,
denture cleaner or acetone; using inappropriate household cleaning products
such as abrasive cream or powder cleansers, furniture polish, bleach,
mentholated spirits, drain cleaners, sugar soap, metal pads and strongly
alkaline or acidic cleaners; heat damage, including from washing the product
at high temperatures; impact or mishandling the product, including the impact
caused by objects scraped along, thrown or dropped on the product surface or
excessive weight being placed on the product; structural or support changes in
or affecting the building or the application where the product has been
installed; failure to clean or maintain the product as recommended; or any
other causes specified in the product information as being excluded from this
warranty.
4. Variations with the color or gloss within the product or any ageing or
fading of color, shine or gloss level over time are not covered by this
warranty. The warranty does not cover visual imperfections or blemishes in the
surface and edges of the product that were not brought to your supplier’s
attention at the time you inspected the product.
5. We will not be responsible under this warranty for, nor pay the costs of,
removing the existing product, or reinstalling the new product, or any
associated costs or damages.
6. Charcoal filters and light bulbs are not covered by this warranty.
The benefits given by this warranty are in addition to other rights and
remedies of consumers under any law in relation to the goods which cannot be
excluded.
This warranty certificate is not intended to create a contract between Shriro
Australia Pty Limited and the purchaser.
New Zealand
Monaco Corporation Ltd Telephone: (09) 415 6000 Facsimile: (09) 415 7400
Email: customercare@robinhood.co.nz www.robinhood.co.nz
IM Ref: 11/2022/10FC
Australia
Shriro Australia Pty Ltd ABN 28 002 386 129 Telephone: 1800 648 556 Facsimile:
1800 628 577 Email: customercare@robinhood.com.au www.robinhood.com.au
14
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>