LEITNER LH470-475 Wireless Computer USB Headset User Guide
- June 10, 2024
- LEITNER
Table of Contents
LEITNER LH470-475 Wireless Computer USB Headset
Connecting to your device
- Plug the dongle into your computer or tablet and wait for the device to recognize the dongle (may take up to a minute).
- Press and hold the ON/OFF button A until the Focus Light flashes purple, then release. Once it stops flashing, press the ON/OFF button again to turn the headset on.
Note: If the dongle is unplugged for over 5 minutes, your headset will go to sleep. To wake it up, follow the 2 steps above.
FocusLight
The integrated LED on your headset flashes and changes color depending on what
your headset is doing.
Incoming Call:
Flashing Blue*
Active Call:
Solid Blue 
On Mute:
Solid Purple 
*Requires compatible softphone or communication software
For full manual & rapid setup
SCAN HERE: leitnerheadsets.com/go
Pairing & Charging
Pairing
If your dongle is plugged in and the headset is flashing red, they need to be
re-paired. Follow these simple steps:
- With the dongle plugged into your device, press and hold the button on the side of the dongle until the white LED flashes once, then release. It will continue to flash.
- Press and hold the ON/OFF button A until the FocusLight flashes blue once, then release. The FocusLight will start flashing purple. When the FocusLight and the dongle LED stop flashing, pairing is complete. ****
Charging
To charge your headset plug the USB cord into the port on the side of the
headset and connect the other end to power.
Travel Clip
The travel clip is a handy way to connect the dongle to your headset while
traveling. The dongle slides into the travel clip and then clips onto your
headband. 
For the full manual go to : leitnerheadsets.com/go
Rapid response email: hello@leitnerheadsets.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>