VONROC WL501DC Work Light Instruction Manual
- June 10, 2024
- VONROC
Table of Contents
VONROC WL501DC Work Light
SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the
instructions. Failure to follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury. Save the safety warnings
and the instructions for future reference.
The following symbols are used in the user manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.
Risk of electric shock.
Protection class III.
IP20 Protection class IP20.
The light produced by this flash light is extremely bright.
Do not look directly into the light. This may momentarily impair your vision.
Do not continue working if your vision is affected.
Do not cover the lens while operating the flash light. This may cause the flash light to overheat.
Do not use in rain.
Indoor use only.
The LEDs are not replaceable.
Do not dispose of the product in unsuitable containers.
CE: The product is in accordance with the applicable safety standards in the European directives.
SAFETY WARNINGS FOR WORK LIGHT
- Please read and observe all safety warnings and instructions enclosed with the battery or the power tool with which the battery was provided.
- Do not work with the cordless worklight in hazardous areas.
- After the automatic shut-off of the cordless worklight, do not continue to press the On/Off button. The battery could become damaged.
- Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance).
- D o not cover off the lamp head while operating the cordless worklight. The lamp head heats up during operation and can cause burns when the heat accumulates.
- Do not use the cordless worklight in road traffic. The cordless worklight is not approved for illumination in road traffic.
- Before any work on the cordless worklight itself (e.g. assembling, maintenance, etc.), as well as when transporting and storing, remove the battery from the cordless worklight.
- D o not allow children to use the cordless worklight. It is intended for professional use. Children can unintentionally blind themselves or other persons.
MACHINE INFORMATION
Intended use
The work light is intended for mobile illumination in limited space and for
limited time in dry indoor areas and is not suitable for general room
lighting.
TECHNICAL SPECIFICATIONS
Model No. WL501DC
- Voltage 20V
- Power input Max. 1.5W
- Head positions 6
- Pivoting angle 128º
- Weight 0.11kg
The following charger of the can be used to charge these batteries.
CD802AA Quick charger
The batteries of the VONROC POWER 20V battery platform are interchangeable
with all the VONROC POWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams.
- On/Off switch
- Lamp head
- Lens plate
- Carrying handle
- Battery unlock button
- Battery (not included)
ASSEMBLY
Before any work on the power tool, remove the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is clean and dry before connecting to
the charger or machine.
- Insert the battery (6) into the base of the ma-chine as shown in Fig. B.
- Push the battery further forward until it clicks into place.
Removing the battery from the machine (Fig. B)
- Push the battery unlock button (5)
- Pull the battery out of the machine like shown in Fig. B.
OPERATION
On/Off switch (Fig. A)
- Press the on/off switch (1) once to turn the work light on.
- Press the on/off switch (1) again to turn the work light off.
Pivoting head (Fig. C)
The pivoting head (2) can be positioned within a range of 128º as desired by
swiveling it up or down.
Setting the angle of diffusion (Fig. D)
You can set the angle of diffusion by turning the lens plate (3) to one of 2
positions.
Carrying handle (Fig. E)
The cordless work light can be carried or fastened to an object with the
carrying handle (4).
MAINTENANCE
Before cleaning and maintenance, always switch off the machine and remove the battery pack from the machine.
Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or electronic apparatus have to be
collected at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European
Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must
be collected separately and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.
DECLARATION OF CONFORMITY
WL501DC – WORK LIGHT
We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
EN 60598-1, EN 60598-2-4, EN 62493, EN 55015, EN 61547 2014/30/EU, 2014/35/EU, 2011/65/EU, 2012/19/EC
Zwolle, 01-04-2022 H.G.F Rosberg
CEO
VONROC • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
©2022 VONROC
WWW.VONROC.COM
2204-06
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>