freelap TX H20 Pro Transmitter User Guide
- June 10, 2024
- freelap
Table of Contents
QUICK GUIDE
TX H20 Pro Transmitter
Welcome to Freelap World!
Congratulation in thinking outside the box and providing your team with a tool
that will truly maximize their training experience!
HOW DOES IT WORK ?
Freelap® timing system is based on the emission and detection of electromagnetic fields and consists mainly of three elements:
|
TRANSMITTERS
Placed at the edge of the swim lane, they emit electromagnetic fields.
---|---
| CHIP
Worn by the swimmer, it detects the pulses of electromagnetic fields as the
swimmer passes the transmitters, and measures time intervals between each
transmitter.
| MYFREELAP APP
When the swimmer passes a transmitter, the timing data is automatically
recorded and instantly transmitted via Bluetooth to your mobile device via
MyFreelap app. Data can also be synchronized, checked and exported on a
computer via your myfreelap.com account.
CREATE YOUR MYFREELAP ACCOUNT
PUT ON THE SWIM BELT
- Humidify the electrodes of the Swim Belt.
- Place it on your skin (Freelap logo facing out), just below your chest. Then adjust the elastic band.
- It turns on automatically when the electrodes are in contact with the skin and turns off when it is not.
TURN ON & ATTACH THE FXSWIM
- Put on the Swim Vest over the Swim Belt (pocket on the back)
- Turn on the FxSwim: Press the central button for 2s.
- Place the FxSwim in the small pocket on the back of the Swim
Vest. Close the pocket with the snap button.
The FxSwim must be placed horizontally, facing outwards.
PLACE YOUR TRANSMITTERS
TX H2O PRO
- Turn on the Tx H2O Pro transmitter: press the central “ON/OFF” button for 1 second.
- Place the Tx H2O Pro on the starting block (or at the edge of the swim lane).
It has the shape of an arrow. Point the arrow towards the swim lane.
EXAMPLES OF USE
www.freelap.com/support/user-guides
https://www.freelap.com/support/user-guides/
CREATE YOUR WORKOUT USING MYFREELAP
- Open MyFreelap app. Make sure Bluetooth and location are enabled.
- Create your new workout by pressing the + sign at the top.
- Fill in the details and press “Start”. Let the app run in first plan.
- You are ready to receive timing data !
FIND MYFREELAP APP COMPLETE DOCUMENTATION ON OUR WEBSITE
www.freelap.com/support/myfreelap-app
To ensure the perfect reception of the data, place your mobile device:
– Next to the last transmitter (between 5m and 50m)
– At a height of 1 meter off the ground
// Nothing to do if you are using a smartwatch or keeping your phone in your
pocket.
TAKE THE START
- To take the start, place yourself on the starting block and wait at least 10s in this zone. As soon as you leave the detection field of the Tx H2O Pro transmitter, the initial rest time is recorded and the swim session begins.
FINISH THE WORKOUT
- Stop your FxSwim by pressing the central button for 2s, and remove your Swim Belt.
- To view the detailed chart of your training: Press 3 short presses on the FxSwim button. From the app, go to your Workout, click on on the top right, and then on “Download”. Finally, click on the “Chart” tab.
BATTERIES
- Swim Belt: CR1632 – 4’000 hours of training
- FxSwim: CR 2032 – 400 hours of training
- Tx H2O Pro: 3.7V 5Ah LiPo rechargeable – 200 hours of training
FIND ALL THE INFORMATION ABOUT YOUR FREELAP PRODUCTS AND OUR DOCUMENTATION ON OUR WEBSITE: WWW.FREELAP.COM
For more information, please contact your distributor.
You can find the list on www.freelap.com/freelap-
contact
Av. D.-Jeanrichard 2A – CH-2114 Fleurier – Switzerland
Phone: +41 (0)32 861 52 42 / E-mail:
contact@freelap.ch
© Freelap SA 2002 – 2019 – All rights reserved. Freelap is a registered
trademark of Freelap SA.
V031122
References
- MyFreelap
- Freelap - Electronic sports timing system for speed development
- Freelap Contact - Electronic timing for speed development
- MyFreelap Documentation - User guide of your timing mobile app
- User guides by sports & instructions for use - Freelap
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>