Dante HDP-AUD2ENC 2CH Analog Audio Encoder with POE User Manual
- June 4, 2024
- Dante
Table of Contents
Dante HDP-AUD2ENC 2CH Analog Audio Encoder with POE
Introduction
This Dante 2CH Analog Audio Encoder is an audio transmitter based on the Dante Ultimo solution. It supports balanced/unbalanced audio input and 3-level gain adjustment. It encodes audio signals and then transmits the audio to the receiving end through the network (Dante). It supports the POE function.
Features
- Analog audio input supports balanced/unbalanced audio input (unbalanced access to “+” and “GND”)
- Audio sampling rate supports 44.1kHz, 48kHz, and 96kHz (24bit)
- Dante solution supports AES67 RTP audio transmission
- Audio input supports 3-level gain adjustment：
- 18dBu, 0dBu (default) and -10dBV
- Support DC 12V power supply and POE function (IEEE802.3af Class 0)
Package Contents
- 1× Dante 2CH Analog Audio Encoder
- 1× 6pin-3.81mm Phoenix Connector (male)
- 1× 2pin-3.81mm Phoenix Connector (male)
- 1× User Manual.
Specifications
Technical
Video Network Bandwidth| 100M
Audio Formats| PCM 2.0 44.1kHz/48kHz/96kHz up to 24bit
Transmission Distance| 100m (CAT6/6A)
Control Method| Dante Controller
Connection
Inputs| 1x PWR [2-pin phoenix, 3.81mm]
1x AUD [6-pin phoenix, 3.81mm]
Output| 1x DANTE [RJ45 connector, POE]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 120mm[W] x 47mm[D] x 26mm[H]
Weight| 186g
Power Supply| DC input: 12V
POE input: IEEE802.3af Class 0
Power Consumption| 1.2W
Operation Temperature| 32 – 104°F / 0 – 40°C
Storage temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Operation Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | DC IN | DC 12V power input port. |
2
| AUDIO
INPUT (CH1/CH2)
| 2 channel analog audio input ports, supporting balanced and
unbalanced audio.
3
| ****
DANTE (POE)
| Dante digital audio output port. Connect to the Network Switch through the RJ45 line, supporting the PD power supply.
The green LINK LED is always on after a normal connection.
The yellow DATA LED is flashing when there is data transmission.
4
| ****
GAIN switch
| Used for audio input gain adjustment, respectively +18dBu, 0dBu (default), -10dBV.
Application Example
Trademarks Dante® is a registered trademark of Audinate Pty Ltd. All other trademarks are the property of their respective owners.