Dante Firmware Update Supplement Using Apple Computer Instructions
- June 9, 2024
- Dante
Table of Contents
DANTE FIRMWARE UPDATE SUPPLEMENT
DANTE UPDATE FOR APPLE SILICON
Firmware Update Supplement Using Apple Computer
To update the Dante Firmware using an Apple computer with Apple Silicon (M1 or M2 chipsets), use the Dante Controller.
1. Launch the Dante Controller.
2. Launch Dante Updater using COMMAND-U or go to View on the top menu and
select Dante Updater.
3. Select Advanced Settings with the right side three bar menu.
Ensure the Allow Imported Firmware box is selected and the other two options
are NOT selected.
|
---|---
4. From the top right menu area, press LIBRARY. Scroll down and select the
IMPORTED FILES drop down. PRESS IMPORT from the bottom right.
5. Load the “mix1632_22.6.14.160_EXP2_XXXX.dnt” file from the LM-DANTE-EXP
Firmware Update Zip file. You should see it populate the Imported Files
section.
|
6. From the top menu, press HOME.
7. Ensure the Livemix MIX-16 or MIX-32 is powered on and connected to the
Dante Network.
8. Use the IMPORTED FIRMWARE FILES dropdown in the main
window to see the firmware file imported earlier.|
9. Press the arrow to the left of MIX-16 or MIX-32 and press UPGRADE in the
bottom right to start the update.
10. Select the checkbox and press UPDATE NOW to start the update.
|
11. When update is complete, reboot the device by selecting the checkbox next
to REBOOT REQUIRED and then press REBOOT SELECTED DEVICES.
12. Firmware Update is complete.
|
® and™ 2014 – 2016 Digital Audio Labs. © 2023 Digital Audio Labs.
USER GUIDES AVAILABLE
WWW.DIGITALAUDIO.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>