GE Profile PEP7030DT 30 Inch Built-In Touch-Control Electric Cooktop Owner’s Manual
- June 10, 2024
- GE Profile
Table of Contents
PEP7030DT
GE Profile™ 30″
Built-In Touch-Control
Electric Cooktop
OPTIONAL FILLER TRIM KIT
Fill in any counter top gaps with this filler trim kit. Order part number
JXTR32B.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops
are guaranteed for an exact fit or GE Appliances will pay up to $100 toward
modifications.
Visit geappliances.com for more info.
COMPATIBLE COOKTOP WITH SMART COOKWARE
Smart pans easily pair with this smart cooktop to ensure you get the perfect
cooking results. Accessories sold separately.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5″ free area between the bottom of the cooktop to any
combustible materialize., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation instructions. Requires a
15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished
with a 48″ flexible armored cable.
NOTE: 30″ Ribbon cooktops are approved for use over select GE 27″ and GE 30″
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming
drawer installation instructions packed with product for current dimensional
data. If installed with a GE Telescopic Downdraft System, consult both the
cooktop and downdraft installation instructions packed with product before
installing. Cooktop gas/electric supply may need to be re-routed to install
downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop
surface and 25″ minimum total countertop depth.
In addition, other clearances to front edge of the countertop must be
considered. Before installing, consult installation instructions packed with
product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your
countertop cutout is larger than the dimension shown, up to 29-13/16″ x
20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout
opening for installation of this cooktop. These kits may be ordered from your
GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
INSTALLATION ABOVE A WALL OVEN
VOLTAGE (60HZ AC) | 240V | 208V |
---|---|---|
CONNECTED LOAD (MAX.) | 9.5kW | 7.1kW |
CURRENT DRAW (MAX.) | 39.6 Amps | 34.3 Amps |
RECOMMENDED CIRCUIT BREAKER | 40 Amps | 40 Amps |
NOTE: Check local codes for required breaker size.
FEATURES AND BENEFITS
Power Boil on Dual-Ring Element
Precision Temperature Control
Guided Cooking
Glide Touch Controls – 11 Control Levels
Easy Clean Surface
Synchronized Elements
Chef Connect
Built-in WiFi
Compatible Cooktop with Smart Cookware
Keep Warm Setting
Control Lock
Hot Surface Indicator Lights
Fit Guarantee
Model PEP7030DTBB – Black on black
For answers to your Monogram, GE Café™ , GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Documents / Resources
| GE
Profile PEP7030DT 30 Inch Built-In Touch-Control Electric
Cooktop
[pdf] Owner's Manual
PEP7030DT 30 Inch Built-In Touch-Control Electric Cooktop, PEP7030DT, 30 Inch
Built-In Touch-Control Electric Cooktop, Built-In Touch-Control Electric
Cooktop, Touch-Control Electric Cooktop, Electric Cooktop, Cooktop
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>