ALTA WINDOW FASHIONS ROLLER SHADES Sides and Sill Privacy Light Block Instruction Manual
- June 4, 2024
- ALTA WINDOW FASHIONS
Table of Contents
WINDOW FASHIONS ROLLER SHADES Sides and Sill Privacy Light Block
Instruction Manual INSTALLATION INSTRUCTIONS
ROLLER SHADES Sides and Sill Privacy Light Block
ROLLER SHADES
Sides and Sill Privacy Light Block
Install the Shade and Lower the Shade
Note: For instructions on how to install the shade refer to the provided Roller Shades Installation instructions. Once the shade has been installed, lower the shade to rest on the window sill.
Prepare the Privacy Strips
Note: Before installing your privacy strips, determine if you will be
mounting the product in front or behind the material.
First, Measure the height of the opening where the side channel is to be
installed and verify that each piece fits in the intended space. Adjust with a
saw if needed.
Important: For Cassettes, Fascias, and Pocket installations, measure from
the bottom of the top treatment to the window sill.
Install the Privacy Strip
Once mounting locations is determined, install your privacy strips with the provided installation screws, evenly spaced. Note: Raise the shade as needed, as to not damage the fabric.
Child Safety
WARNING5.1.3
Rev. 5/18 Print 5/18
Window Blind Cord Can STRANGLE Your Child. To prevent strangulation, purchase
cordless products or products with inaccessible cords.
**WARNING
STRANGULATION HAZARD –**
Young children can be strangled by cords.
Immediately remove this product if a cord longer than 22 cm or a loop
exceeding 44 cm around becomes accessible.
Rev 7/21 Print 7/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>