Newell Vividha Max LED Light Instruction Manual
- June 10, 2024
- Newell
Table of Contents
Newell Vividha Max LED Light
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
- The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
- Do not use near flammable materials and solvents.
- Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
- The lamp can operate in a temperature range of 0°C – 40°C.
- The lamp will heat up slightly, but it is normal.
- Do not stare directly at the LED panel that is turned on, it may cause eye damage.
- Do not use the LED outside in direct sunlight for a long time.
- Disconnect the power supply for storage or transportation.
- Allow the unit to cool down before placing it in the package.
- For use by adults.
- If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.
Maintenance
- Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt.
- Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.
PRODUCT DESCRIPTION
Characteristic
RGB Vividha Max is an LED lamp designed in a slim version. A specially
designed housing provides cooling for the device. Built-in barn doors allow
you to control the light output and an optional mounted diffuser to soften it.
Built with 216 five-color LEDs – RBGWW. Thanks to the built-in bracket it is
possible to adjust the panel in any 360°, which allows you to perfectly adjust
the light. Using a high-efficiency voltage-reducing converter and a DC
efficiency scale, each LED uses its maximum potential. With the help of the
TFT display, you can easily read the current brightness, color temperature and
battery charge status. It has 9 predefined light themes. The lamp is powered
by two NP-F type batteries (sold separately) or a power adapter (included).
Construction
- Soft filter
- Light panel
- Barn door
- Angle adjustment knob
- Lock knob
- Bracket
- Battery compartments
- Battery removal button
- Function button
- Display screen
- Function adjustment knob
- DC socket
- Power switch
INSTALLATION AND USAGE
Power on/off
- Use battery power At the same time, insert two NP-F series batteries into the battery compartment of the photography light in the correct direction. Set the power switch to the ‘I’, the power indicator will light up, and the photography light will turn on.
- Use external adapter for power supply Use an external adapter to supply power. Connect the 15V 3A adapter that matches the product to the adapter DC socket of the photography light and connect the adapter to the power supply. Set the power switch to the ‘II’, the power indicator will light up, and the photography light will turn on.
Power off
Turn the power switch to end 0, the power indicator light goes out, and the
camera light turns off.
Function adjustment settings
Control panel
- MENU Menu, return, exit, language switch
- FN1 Function key 1, when pressed, enter the menu or parameter item displayed on the right screen
- FN2 Function key 2, when pressed, enter the menu or parameter item displayed on the right screen
- FN3 Function key 3, when pressed, enter the menu or parameter item displayed on the left screen
- FN4 Function key 4, when pressed, enter the menu or parameter item displayed on the left screen
- SET Function knob, adjust the current menu or adjust the current parameter value
- POWER Power switch, toggle to the battery end to supply power to the battery, toggle to the DC end to supply power to the adapter
- DC Adapter power input DC jack
Function description
The product is divided into three working modes: white light, color light, and preset scenes. Its access and usage methods are as follows:
White light mode
After the product is turned on, the display shows the main menu. Press the FN1
button on the left side of the white light option to enter the white light
mode, and the white light will light up. After entering the white light mode,
press the FN1 or FN3 button and turn the function knob to change the
brightness of the white light. Press FN1 or FN3 again to exit the brightness
adjustment. Press the FN2 or FN4 button and turn the function knob to change
the color temperature of the white light. Press the FN2 or FN4 button again to
exit the color temperature adjustment. Press the MENU button to exit the white
light mode and the white light will go out.
RGB mode
After the product is turned on, in the main menu interface, press the FN2
button corresponding to the left side of the color light option to enter the
color light mode. In the color light mode, the RGB lights will light up. After
entering the color light mode, press the FN1 button and turn the function knob
to change the brightness of the RGB lights. Press the FN3 button and turn the
function knob to change the saturation of the RGB light. Press the FN2 or FN4
button and turn the function knob to change the hue of the RGB light. Press
the MENU button to exit the color light mode, and the RGB light is off.
Scene mode
After the product is turned on, in the main menu interface, press the FN3
button to enter the scene mode. At this time, turn the function knob to select
the preset scene mode. Press the FN1 key to set the current preset scene.
After entering the setting interface, you can set the brightness, color
temperature, type, frequency and other parameters according to different
scenes. In the scene mode interface, press the FN2 button to stop the running
of the current preset scene. After stopping, press FN2 again to continue to
run the current preset scene. Press the MENU button to exit the scene mode.
PRODUCT SIZE
SPECIFICATION
- The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
Newal Newell products are covered by a 40-month manufacturer’s warranty. Made in China. In China hergestellt. Hecho en China. Fabricator in Cina.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>