VONROC EH513AC Electric PTC Fan Heater Instruction Manual

: June 10, 2024
: VONROC

Table of Contents

VONROC EH513AC Electric PTC Fan Heater
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
GENERAL SAFETY WARNINGS
MACHINE INFORMATION
TECHNICAL SPECIFICATIONS
OPERATING
MAINTENANCE
ENVIRONMENT
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONROC EH513AC Electric PTC Fan Heater

VONROC-EH513AC-Electric-PTC-Fan-Heater-product

Product Information

Electric PTC Fan Heater EH513AC
The Electric PTC Fan Heater EH513AC is a household appliance designed for indoor use. It is a Class II machine with double insulation and does not require an earthed plug. The product is suitable for well-insulated spaces or occasional use only. The heater is in accordance with applicable safety standards in the European directives.

Product Usage Instructions

Safety Instructions: Before using the Electric PTC Fan Heater EH513AC, read the enclosed safety warnings, additional safety warnings, and instructions carefully. Failure to follow the safety warnings and instructions may result in electric shock, fire, and/or serious injury. Save the safety warnings and instructions for future reference.
Power Supply: Connect the heater to an electrical outlet with a voltage rating of 220-240V AC, 50/60Hz, and rated current of 10A.
Heater Placement: Place the heater on a flat and stable surface. Do not place it on a carpet or any surface that can catch fire. Keep the heater away from combustible materials.
Heater Operation: Turn on the heater by pressing the power button. Select the desired temperature and fan speed using the mode button. The heater has a PTC ceramic heating element that provides fast and efficient heating. Do not cover the heater to avoid overheating.
Child Safety: Children aged 8 years and above can use the heater if they have been given supervision or instruction concerning safe use of the appliance. Children aged from 3 years and less than 8 years can switch on/off the heater only if it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning safe use of the appliance.
Cleaning and Maintenance: Do not clean or perform maintenance on the heater without supervision. Keep the heater clean and free from dust. Do not dispose of the product in unsuitable containers.

Original Instructions
This product is only suitable for well insulated spaces or occasional use.

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, ﬁre and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:

Read the user manual.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-obser-vance of the instructions in this manual.
Denotes risk of electrical shock.
Class II machine – Double insulation – You don’t need any earthed plug.
Important! WARNING: In order to avoid overheating, do not cover the heater.
Do not dispose of the product in unsuitable containers.
The product is in accordance with the applicable safety standards in the European directives.

GENERAL SAFETY WARNINGS

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

ADDITIONAL SAFETY WARNINGS FOR ELECTRIC HEATER

• Children should be kept away unless continuo-usly supervised to ensure that they do not play with the heater.
• Children shall not plug in, position, operate, re-gulate and clean the appliance or perform user maintenance.

CAUTION- some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
The heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.
Please note that the heater can become very hot and should, therefore, be placed at a safe distance from ﬂammable object such as furnitu-re, curtains and similar.

Use handle when moving this heater.
D o not move the heater when it is heated. Allow the product to thoroughly cool before handling it.
Do not cover the heater.
The heater must not be located immediately below a socket outlet.
Do not connect the heater using an on/off timer or other equipment which can automatically switch the device on.
The heater must not be placed/used in rooms where ﬂammable liquids or gases are used or stored.
If an extension cord is used, it must be as short as possible and always be fully extended. You must not connect other appliances to the same mains socket as the heater.
Do not use the heater in immediate surroun-dings of a bath, a shower or a swimming pool.
If the supply cord is damaged, it must be re-placed by the manufacturer, its service agent or similarly qualiﬁed persons in order to
avoid a hazard.
Make sure the heater is always under surveillan-ce and keep children and animals away from it. Do not place/use the heater on moving vehicles or some where easy to be tripped over.
When the heater is not used for a long time, unplug the heater form its means. Pull the plug straight out, never remove the plug by pulling the cord.
Keep the heater far from curtain or places whe-re the air inlet van easily be blocked.
The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current, never use the heater with wet hand or operate the heater when there is water on the power cord.
Do not dispose of electrical appliances as un-sorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Warning

Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

Electrical safety
When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Caution: Always check that the voltage of the power supply corresponds to the voltage on the rating plate label.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

MACHINE INFORMATION

Intended use
The electrical heater is intended for indoor, non-commercial, household use for temporarily heating residential rooms. Do not use the product for any other purpose. The heater can be used in enclosed rooms in a free standing position for room heating. The heater may only be used completely mounted and standing vertically on a stable surfa-ce. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating element and therefore the temperature.

TECHNICAL SPECIFICATIONS

Model No.	EH513AC
Power supply	220-240 V ~/ 50 Hz
Power rating	1800 W
Settings	Fan / 1200 W / 1800 W
Temperature range	15 – 35oC
Timer	1 – 9 hour
Heating capacity	20 m2
Protection class	Class II
Length of cord	1.6 m
Weight	1.6 kg

DESCRIPTION
The numbers in the text refer to the diagrams on page 2.

Heater
Control panel
Air outlet grille
Base
Tip-over switch
Handle
Main switch
Air inlet
Temperature LCD-display
Indicators
- A. Power indicator
- B. High heating indicator
- C. Low heating indicator
- D. Temperature indicator
- E. Celsius indicator
- F. Fan indicator
- G. Oscillate indicator
- H. Timer indicator
Temperature lower button
Temperature higher button
On / off button
Mode button
Oscillation button
Timer button
Power cable

OPERATING

Check the device for damage before use and only use in good working condition.

When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time. The heating element is made of stainless steel and was coated with protection oil by production. The smoke is caused by the left oil when heated.

Placing the electric heater

Place the heater upright on a firm and a level surface.
Keep a minimum distance of 1 m between the front of the housing and walls, combustible materials (furniture, curtains, etc.) and 30 cm from all other housing surface areas. Keep away from wet environments.

Warning: Make sure to place the heater in a safe spot, so you cannot easily trip over the machine and cable. Make sure to place the heater where it cannot fall down / of.

Starting the electric heater (Fig. A, B)

Plug in the cable (17) to the mains.
Turn the main switch (7) on.
The power indicator light (10A) will light up.
Press the on/off button (13). The temperature LCD-display (9) will show the default tempera-ture 25oC).

Adjusting the temperature

Set the temperature as desired by using the temperature buttons (11,12). The temperature can be set between 15oC and 35oC.
The heater will automatically select a mode depending on the set temperature and room temperature. Press the mode button (14) to change the heating mode.
Low heating mode – 1200W: the low heating indicator (10C) and the temperature indica-tor (10D) will light up.
High heating mode – 1800W: the high heating indicator (10B) and the temperature indicator (10D) will light up.
Fan: The temperature indicator and the LED-display will turn of. The fan indicator (10F) will light up.

Constant room temperature
The heater starts and stops automatically to keep the room temperature constant. Once the ambient temperature in the room reaches the desired target temperature, the heating element will be in standby mode. Once the ambient temperature starts to decrease, the heating element will be switched on again.

Timer button (Fig. B)
The timer can be set between 1 hour and 9 hours. The display will show the duration currently set. Press the timer button (16) to set the timer with 1 hour intervals. The timer indicator (10H) will light up. Without a timer there is no limit.

Oscillation button (Fig. B)
Press the oscillation button (15) to activate the heater to swing. The oscillate indicator (10G) will light up. Press it again to deactivate.

Tip-over switch (5) (Fig. A)
This heater has an mechanical tip-over protection. This protection ensures when the heater is not placed upright on a firm and level surface or when the heater tip over, the system will automatically shut the heater off. If this occurs, put the heater on a firm and level surface and start the heater again.

Automatic Overheat Safety Control
This heater is equipped with safety internal heat limiting thermostat and overheat protection circuit. When a potential overheat temperature is reached, the system will automatically shut the heater off. If this occurs, the heater can only resume after resetting it. To reset the heater: Unplug the heater and wait at least 30 minutes to cool down before restarting the heater.

Stopping the electric heater
WARNING: Let the machine cool down before turning off by using the ventilation function.

Press the on/off button (13).
The fan indicator flashes and the fan will cool down the heater for a few minutes.
Turn the main switch (7) off.
Pull the plug out of the mains.

Storing the electric heater

Always let the heater cool down completely before storing the machine.
Never wrap the cable around the heater.

Warning: Never store the machine in a wet or dusty environment

MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

Cleaning: Let the machine cool down completely before cleaning.

Clean the heater with a dry towel or vacuum cleaner.
In order to protect the enclosure, don’t splash water onto the heater, and never use a solvent like gasoline, isoamyl acetate, toluene, etc. to clean the heater.
When you store the heater, let it cool down first and, keep it dry.

Trouble shooting
In case the electric heater does not work well, we give you subjoined some possible causes and their solutions.

Problem	Possible cause	Treatment

The heater does not operate, even when it

is plugged in and the switch, thermostat are switched on.

| The plug is loose, bad connection| Pull out the plug, check the connection of the plug and socket. Then connect again.

No power in socket outlet

|

Insert the plug in a proper socket

The heating element glowing

| The input voltage is too high or too low| Use power supply according to the rating on the label

The air inlet grill is blocked

| Keep the heater far way from articles like curtain, plastic bag, paper and other things which can cover the inlet or can be easily cover on the air inlet

The appliance didn’t heat up, only ventilator worked

| The switch was not put at heating setting|

Turn the switch to heat setting

The thermostat operated

| Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat

is not damaged, the heater will automatic switch on when the appliance cooled down

The self-retting cut-out operated

| Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the

protection system to reset before attempting to restart the heater.

Abnormal noise

| The appliance is not stands upright|

Put the heater on a level surface

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this guarantee:

Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
Normal wear and tear;
The tool has been abused, misused or improperly maintained;
Non-original spare parts have been used.

This constitutes the sole warranty made by compa-ny either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the im-plied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.

The product and the user manual are subject to change. Speciﬁcations can be changed without further notice.

Model identifier(s): EH513AC

We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations: