PETLIBRO PLAF107 Space Automatic Pet Feeder User Manual

PLAF107 Space Automatic Pet Feeder
User Manual

PLAF107 Space Automatic Pet Feeder

Please read this manual before using the product and keep it for future reference. Or open the PETLIBRO app and go to DEVICE SETTINGS > Instructions for the digital manual and instructional video.

IN THE BOX

PRODUCT OVERVIEW

|
---|---
1. Lid Release Button
2. Lid
3. Silicone Strip
4. Food Tank
5. Vane
6. Rotor
7. Rotor Cover
8. Status Indicator
9. Food Tank Lock Switch
10. Air-Sealing Button| 11. Body
12. Stainless Steel Bowl
13. Bowl Tray
14. Reset Button
15. Speaker
16. Power Port
17. Battery Compartment
18. Battery Compartment Cover
19. Foot
20. Non-slip Pad

Buttons

to open it
Food Tank Lock| Toggle the lock switch to remove or lock the food tank in place

Indicator Status

Failed to remove air
The food outlet is blocked
Food levels are low
Low battery
The rotor is stuck
Off| The feeder is powered off
Battery power only, and the feeder is in battery saving mode

GETTING STARTED

Installation

1. Push the button and remove the lid.
2. Add dry pet food to the food tank.
3. Replace the lid and push the button to make sure the lid is securely locked.
4. Install the stainless steel bowl and bowl tray.
5. Press the button to remove air from the tank.

Notes

• If the lid is not securely locked, the feeder can’t successfully remove air from the tank. Please make sure the two “LOCKED” markings on the button are clearly seen without being blocked after installing the lid. If the markings are blocked, manually push the button again.
• Add dry pet food before pressing the button.
• After the air in the food tank is removed, if you don’t push the button first, you can’t open the lid.

https://www.youtube.com/playlist?list=PLOKenNR379YkddFNhaGhCpE4MKhc01QyV

Note

• Scan the QR code above to watch the video for product installation and cleaning.

Power on
Install four D alkaline batteries into the battery compart-ment. And connect the feeder to a wall outlet with the power adapter and power cable.

Power off
Unplug the cable from the outlet and remove the batteries.
Standard Mode & Battery Saving Mode

level
Wi-Fi Connection| Supported| Not supported
Power Supply| Battery/wall power| Battery power
Mode Selection| Default| Manually select in the app

Note

• Using all the product functions in Standard Mode when the feeder is powered by batteries only will significantly shorten the battery life. For better user experience, we suggest you select Battery Saving Mode when the feeder is powered by batteries only.

APP CONTROL

1. Download and install the PETLIBRO app.
2. Follow the instructions to configure the network.

SPECIFICATION

SAFETY INSTRUCTIONS

• Use the feeder in a dry place.
• Use the feeder on a level surface.
• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
• Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.
• Do not immerse the base part in water at any time as it may damage electronic components.
• Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.
• Do not disassemble the feeder other than as instructed in this user manual.
• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
• Do not modify the feeder.
• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
• To avoid tripping, always position the power cable out of the way of foot traffic.
• Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Power off the feeder when it’s not in use.

WARRANTY

• 12-month warranty
• For guidance on product use, please contact our customer service team via email: support@petlibro.com.

NOTICE

FCC statement
This device complies with Part 15 of the FCC Rules. Oper-ation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit differ-ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-cian for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or trans-mitter.
Radio frequency exposure statement
To maintain compliance with the FCC’s RF Exposure Guidelines, this equipment should be installed and oper-ated with a minimum distance of 20cm from your body.
PMN: Space Automatic Pet Feeder

ISED Statement：
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SPACE
Automatic Pet Feeder
@Libro Corp. All Rights Reserved.
Model: PLAF107
Manufacturer: Shenzhen Libro Technology Co., Ltd.
Address: 12/F, Tower B, GALAXY WORLD, Yabao Road,
Longgang District, Shenzhen, China
JP Importer:
Made in China
PLAF107_V1.0
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

http://www.petlibro.com
FCC ID: 2A3DE-PLAF107
IC: 28987-PLAF107

Documents / Resources

| PETLIBRO PLAF107 Space Automatic Pet Feeder [pdf] User Manual
PLAF107, 2A3DE-PLAF107, 2A3DEPLAF107, PLAF107 SPACE Automatic Pet Feeder, SPACE Automatic Pet Feeder, Automatic Pet Feeder, Pet Feeder
---|---
| PETLIBRO PLAF107 Space Automatic Pet Feeder [pdf] User Manual
PLAF107 Space Automatic Pet Feeder, PLAF107, Space Automatic Pet Feeder, Automatic Pet Feeder, Pet Feeder, Feeder

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>