AquaClear 11182 Marina Betta Submersible Heater User Manual
- June 10, 2024
- AquaClear
Table of Contents
AquaClear 11182 Marina Betta Submersible Heater
Submersible heater by Marina Betta, 8 W
The Marina Betta warmer is a submersible, automated warmer that provides the perfect aquatic environment for bettas to thrive in. In comparison to conventional glass sleeve heaters, the exterior is constructed of sturdy polymer, which is more resilient.
- A submersible, automatic aquarium heater
- Creates conditions that are optimal for bettas to thrive in
- Made of resilient polymer, more durable than glass.
- Automatic setting of temperature
- Suction cup installation is simple.
Thank you for purchasing the new Marina Betta Heater. For a complete understanding of the heater’s operation and capabilities, please read and follow these instructions.
IMPORTANT SAFETY INSTRUCTIONS
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS with all important notices on the appliance before using. Failure to do so may result in loss of fish and/or damage to this appliance.
- DANGER To avoid possible electric shock, special care should be taken since water is employed in the use of this For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
- Carefully examine the appliance after It should not be plugged in if there is water on parts not intended to be wet. The maximum operating depth is 0.9 meters, (2.9 ft).
- Do not operate any appliance if it has a damaged cord or plug if it is malfunctioning, or if it is dropped or damaged in any manner
- To avoid the possibility of the appliance plug or electrical outlet getting wet, position the appliance to one side of a wall-mounted outlet to prevent water from dripping onto the outlet or A “drip- loop”(see ill 1) should be arranged. The“drip-loop” is that part of the cord below the level of the outlet, or the connector if an extension cord is used, to prevent water from traveling along the cord and coming in contact with the outlet. If the plug or outlet does get wet, DON’T unplug the electrical cord. Disconnect the fuse or circuit breaker that supplies power to the appliance, then unplug and examine for the presence of water in the outlet.
- To avoid injury, do not contact hot parts.
- Always unplug an appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning the Aquarium. Never yank the cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.
- This is an aquarium heater. Do not use an appliance for other than its intended use (i.e.: don’t use this heater in swimming pools, garden ponds, bathrooms, etc.). The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.
- This heater is suitable for INDOOR use only. Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.
- Make sure that the heater is securely installed before operating it.
- If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for fewer amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
- Never use an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.
- The power cord of this appliance cannot be replaced; if the cord is damaged, the appliance should be discarded. Never cut the cord.
- CAUTION: This or any heater must never be operated outside of water.
- (For North America only) This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If the plug will still not fit fully into the outlet, contact a qualified electrician to inspect the outlet and make the needed alterations. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
HEATER OPERATION
The Marina Betta Heater is an automatic, submersible heater for use in aquariums up to 1½ US Gal. (5 L). The red indicator light will illuminate when the heater is in use. The exterior is made of a tough polymer so that it will not crack or break like traditional glass sleeve heaters. Without any adjustments needed, it is designed to reach and maintain a set temperature.
Bettas do best if kept in warm temperatures so it is important to keep the aquarium water temperature between 75 and 85 °F (24-30 °C).
IMPORTANT:
Variables such as lower room temperature, wide temperature fluctuations,
presence of pumps and filters or aquarium placement in proximity to cooling
sources may affect water temperature. Please consult the chart below.
| Volume | Temperature **reached*** |
|---|---|
| ½ US Gal. (2 L) | 85 °F (30 °C) |
| 1 US Gal. (4 L) | 80 °F (26 °C) |
Based on ambient room temperature of 72 °F (22 °C) It is strongly recommended to monitor aquarium temperature on a regular basis with a reliable aquarium thermometer.
INSTALLATION
- Position the heater in the aquarium and press suction cups firmly against glass or plastic to adhere to the aquarium wall.
- Pass the power supply cord through the designated opening in the aquarium cover (if applicable).
- Allow the heater to acclimatize to the aquarium water temperature for 10 minutes before plugging it into the electrical outlet.
- Plug the power cord into an electrical outlet. Make sure to create a “drip loop” for safety.
- Ensure the heater remains submersed at all times
MAINTENANCE
CAUTION: Unplug all appliances in the aquarium before placing your hands in the water. Unplug the heater and allow it to cool for at least 15 minutes before taking it out of the water.
Clean the heater regularly to remove deposits that could impair the heater’s performance.
Deposits on the heater can be removed by soaking it in a 20% solution of water and vinegar, then rinse it with fresh water before repositioning it in the aquarium. DO NOT USE chemical cleaners.
1 YEAR WARRANTY
This product is guaranteed for defects in material or workmanship for a period of 1 year from the date of purchase. The guarantee is valid with proof of purchase only. The guarantee is limited to the repair or replacement of the unit only and does not cover consequential loss or damage to animate or inanimate objects. This guarantee is valid only under normal operating conditions for which the unit is intended. It excludes any damage caused by unreasonable use, improper installation, negligence, tampering, or abuse of the unit.
To register your warranty online or for more information on this and other products go to: www.hagen.com
FOR AUTHORIZED GUARANTEE REPAIR SERVICE
For Authorized Warranty Service please return (well packaged and by registered post) to the address below enclosing the dated receipt and reason for return.
If you have any queries or comments about the operation of this product, please let us try to help you before you return the product to your retailer. Most queries can be handled promptly with a phone call. When you call (or write), please have all relevant information such as model number, age of the product, details of aquarium set-up, as well as the nature of the problem.
CANADA: Hagen Industries, Consumer Repair, 3235 Guénette, Montréal QC H4S
1N2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansfield, MA.
02048
CALL US ON OUR TOLL-FREE NUMBER:
Canada only: 1-800-554-2436
between 9:00 a.m. and 4:30 p.m. Eastern Standard Time. Ask for Customer
Service.
U.S. only: 1-800-724-2436 between
9:00 a.m. and 4:00 p.m. Eastern Standard Time. Ask for Customer Service.
FREQUENTLY ASKED QUESTIONS
What is the maximum operating depth for the Marina Betta Heater?
The maximum operating depth is 0.9 meters (2.9 ft).
What is the temperature range for optimal betta fish conditions?
The temperature range for optimal betta fish conditions is between 75 and 85 °F (24-30 °C).
How do I install the Marina Betta Heater?
Position the heater in the aquarium and press suction cups firmly against glass or plastic to adhere to the aquarium wall. Pass the power supply cord through the designated opening in the aquarium cover (if applicable). Allow the heater to acclimatize to the aquarium water temperature for 10 minutes before plugging it into the electrical outlet. Plug the power cord into an electrical outlet. Make sure to create a “drip loop” for safety. Ensure the heater remains submerged at all times.
How do I clean the Marina Betta Heater?
Unplug all appliances in the aquarium before placing your hands in the water. Unplug the heater and allow it to cool for at least 15 minutes before taking it out of the water. Clean the heater regularly to remove deposits that could impair the heater’s performance. Deposits on the heater can be removed by soaking it in a 20% solution of water and vinegar, then rinse it with fresh water before repositioning it in the aquarium. DO NOT USE chemical cleaners.
Is there a warranty for the Marina Betta Heater?
Yes, there is a 1-year warranty for defects in material or workmanship from the date of purchase. The guarantee is limited to the repair or replacement of the unit only and does not cover consequential loss or damage to animate or inanimate objects. This guarantee is valid only under normal operating conditions for which the unit is intended. It excludes any damage caused by unreasonable use, improper installation, negligence, tampering, or abuse of the unit.
What should I do if I have a problem with my Marina Betta Heater?
If you have any queries or comments about the operation of this product, please let us try to help you before you return the product to your retailer. Most queries can be handled promptly with a phone call. When you call (or write), please have all relevant information such as model number, age of the product, details of aquarium set-up, as well as the nature of the problem. For Authorized Warranty Service please return (well packaged and by registered post) to the address provided in the user manual enclosing the dated receipt and reason for return.
What is the AquaClear 11182 Marina Betta Submersible Heater?
The AquaClear 11182 Marina Betta Submersible Heater is a small, compact aquarium heater designed specifically for betta fish tanks. It is a submersible heater that helps maintain a consistent and appropriate water temperature for bettas, which are tropical fish that require warm water to thrive.
What is the recommended water temperature range for betta fish using the AquaClear 11182 Marina Betta Submersible Heater?
The recommended water temperature range for betta fish when using the AquaClear 11182 Marina Betta Submersible Heater is typically between 76°F and 82°F (24°C to 28°C). It is important to maintain a consistent temperature within this range to provide optimal conditions for your betta fish’s health and well-being.
Can the AquaClear 11182 Marina Betta Submersible Heater be used in tanks other than betta fish tanks?
While the AquaClear 11182 Marina Betta Submersible Heater is specifically designed for betta fish tanks, it can also be used in other small aquariums that require a similar wattage and temperature range. However, it’s important to ensure that the heater’s wattage is appropriate for the size of the tank and the specific needs of the aquatic species you are keeping.
Is the AquaClear 11182 Marina Betta Submersible Heater fully submersible?
Yes, the AquaClear 11182 Marina Betta Submersible Heater is designed to be fully submersible in water. It can be placed horizontally or vertically in your betta fish tank, ensuring efficient heat distribution.
What is the wattage of the AquaClear 11182 Marina Betta Submersible Heater?
The AquaClear 11182 Marina Betta Submersible Heater has a wattage of 8.5 watts, which is suitable for small aquariums and betta fish tanks.
Does the AquaClear 11182 Marina Betta Submersible Heater have an adjustable temperature setting?
Yes, the AquaClear 11182 Marina Betta Submersible Heater allows you to adjust and set the desired water temperature for your betta fish. It features an adjustable temperature dial or control that lets you choose the temperature within the appropriate range.
Does the AquaClear 11182 Marina Betta Submersible Heater have an indicator light?
Yes, the AquaClear 11182 Marina Betta Submersible Heater includes a red indicator light. The light illuminates when the heater is actively heating the water, indicating that it is functioning properly.
Does the AquaClear 11182 Marina Betta Submersible Heater have an automatic shut-off feature?
Yes, the AquaClear 11182 Marina Betta Submersible Heater is equipped with an automatic shut-off feature. It is designed to turn off automatically when the water temperature reaches the desired level, preventing overheating and potential damage to the heater or the aquarium.
DOWNLOAD THE PDF LINK:AquaClear 11182 Marina Betta Submersible Heater User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>