USV Online Y500 Yunto 500-1500VA UPS System User Guide

: June 4, 2024
: USV

Table of Contents

**
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**

USV Online Y500 Yunto 500-1500VA UPS System

Safety information and quick start guide

Introduction

Thank you for choosing a product from ONLINE USV-System AG. This sheet contains important instructions that you must follow during the installation and maintenance of the UPS system and the batteries. Failure to comply can cause serious technical damage, serious injuries or even death. Please read all the instructions in the manual before working with the device. The manual is available to download free at > www.online-ups.com
Safety information

The UPS system carries life-threatening voltages. All repair and maintenance work must be carried out by customer service personnel.
The UPS system has its own energy source (batteries). The output of the UPS system can be live even when the UPS system is not connected to a source of alternating current.
In order to reduce the risk of fire or electric shock, the UPS system may only be installed in buildings with controlled temperature and air humidity in which there are no conductive contaminants. The ambient temperature must not exceed 40°C. The UPS system must not be operated near water or in extremely high air humidity (>90%).
Before transporting the UPS system, make sure that it is disconnected from the power supply and switched off and that the batteries are deactivated.
Batteries can pose a risk of electric shock or catch fire as a result of high short circuit current. Please take the necessary precautionary measures. Maintenance must be carried out by qualified personnel who are trained in handling batteries and have good knowledge of the necessary precautionary measures. Keep unauthorised personnel away from batteries.
Batteries must be disposed of properly. Local regulations must be taken into consideration.
Batteries must not be burnt. There is risk of explosion.

Scope of delivery USV Online Y500 Yunto 500-1500VA UPS System
05

Download from > www.online-ups.com

Quick start guide

PLEASE NOTE
Make sure that the overall rated performance of the load connected does not exceed the capacity of the UPS system. The power consumption of inductive loads can be very high, please take this into consideration when specifying your UPS system. Laser Printers are not allowed to be connected!

Unpack UPS, check scope of delivery
Plug the mains connection cable (not included) of the load into a wall outlet socket 230V
Switching on the UPS system
switch on the UPS system until you hear a short beep and the status LED glow. The UPS system is working in normal mode.
Connecting load
To connect the load to the UPS system, use the cold device extension cables provided. The load is now powered by the UPS and protected against spikes and power failures.
DSL / telephone / fax / network surge protection
Connect the incoming line with “TO LINE” and the outgoing line with “TO PHONE”
Monitoring- and Shutdown Software installation

Connect your computer to the UPS (USB cable included in delivery).
Download the Data Watch software from > www.online-ups.com and install the software. The license key can be found on the document enclosed with the UPS. USV Online Y500 Yunto 500-1500VA UPS System 02 The software offers options for shut down of the computer, monitoring, surveillance and test functions. The comprehensive user manual is available to download free at > www.online-ups.com

ONLINE USV-Systeme AG
Luise-Ullrich-Straße 8
82031 Germany
Telefon +49 (0)89-242 39 90-10 E-Mail [email protected]
www.online-usv.de
The content is copyright © 2022 by ONLINE USV-Systeme AG. All rights reserved. Unauthorized reproduction in part or in whole is not permitted without consent.