Shenzhen Usv Technology A12 Smart Magnetic Wireless Charger Instruction Manual
- June 6, 2024
- Shenzhen Usv Technology
Table of Contents
Use Technology A12 Smart Magnetic Wireless Charger
Instruction Manual
Smart magnetic wireless charger
Thank you for choosing our digital products. This product is a smart magnetic wireless charger that allows you to easily experience the fun of magnetic alignment wireless charging. Please read the instruction carefully before using this product and save it for future use.
Product List
- Magnetic charger *1
- Product instruction *1
- Type-c charger wire *1
Product parameter
- Input voltage:(compatible with QC/AFC/PD protocol) 5V/2A-9V/2A
- Output power:(automatic mobile phone adaptation): 5W-7.5W-10W
- Output current:1A-1.1A
- Output voltage:5-9V
- 7.5W maximum efficiency:76%
- Charging distance:5mm
- Charging method: magnetic alignment, electromagnetic induction
- Working frequency:110.1-205KHZ
- Product weight:65g
Precautions
- Please use a qualified PD protocol or QC protocol power charger, otherwise, it may cause unstable charging or abnormal flicker;
- If you need to use a protective case for your iPhone 12 / iPhone 13during the charging, please use one with Mag safe;
- Do not use a mobile phone protective shell with a metal back or a mobile phone protective shell with a thickness greater than 4mm;
- The receiving coil of a mobile phone that supports wireless charging is generally located at the center of the mobile phone. Please place the center of the mobile phone at the center of the charging board to get a better charging experience;
- Do not put metal debris or magnetic cards on the charging board, which may cause metal hair, magnetic card damage, charger damage or other abnormalities;
- If the receiving coil or the transmitting board is overheated and the charging stops during the use, please remove the charging device, After waiting to cool down, and try charging again.
Safety notice
- Do not pull the power cord violently to avoid the power cord from breaking or falling off.
- Do not disassemble C10 by yourself or throw it into Dre or water to avoid short circuit and electric leakage.
- Do not use C10 in severe high temperatures. humidity or corrosive environment to avoid electric leakage caused by circuit damage.
Thank you for purchasing our C10 wireless charger.ln order to ensure you get
reliable after-sales service. please read the following warranty instructions
carefully.
Warranty scope
This product fails to work normally or malfunctions during normal use, and
once our company is confirmed, they can enjoy the company’s after-sales
service commitment.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>