CLICK 20A Double Pole Switch Installation Guide
- June 10, 2024
- click
Table of Contents
CLICK 20A Double Pole Switch Installation Guide
2 Way Switch
Double Pole Switch
Wiring Accessories – Pullcord Switches
Safety, Installation and Technical Information
Safety Information
Please read the following information carefully before commencing
installation.
Before commencing any electrical work, to prevent the possibility of receiving an electric shock, ensure the mains isolator on the consumer unit is in the ‘OFF’ position and safely isolated in accordance with Best Practice Guide 3.
If in doubt consult a qualified electrician. The accessory plate must be installed in accordance with the latest IET Wiring Regulations, BS7671.
If this product is being fitted as a replacement part to an existing installation account must be taken to the version of the wiring regulations it was installed to.
Installation Information
When removing the cables from the terminals, note the cable connections in the
terminal to ensure correct wiring of the new accessory.
The mounting box must be of the correct size for the product, metal or plastic.
Please see Technical Information overleaf for minimum back box depth, range dependant. The cable must be routed through the most suitable entry point of the mounting box.
Cables should be prepared to the appropriate lengths (as stated within these instructions) so that the conductor reaches into the terminal, and the circuit protective conductor is the longest. The terminals should be tightened to their appropriate torque value. Do not over tighten.
After making the connections, screw the pullcord switch accessory gently to the surface box ensuring no wires become trapped. Screw the accessory fully home making sure, when done, the plate is not distorted.
Mains Wiring:
‘L’ – Live Coloured Brown or Red
– CPC Coloured Green/Yellow
‘N’ – Neutral Coloured Blue or Black
45A & 50A Double Pole (Without Pattress)
50A Double Pole (With Pattress)
3 Pole Fan Isolator (Without Pattress)
Errors & Omissions excluded. Instructions are subject to change without notice.
Scolmore House | Mariner | Lichfield Road Industrial Estate | Tamworth |
Staffordshire | B79 7UL | United Kingdom
T: +44 (0)1827 63454 | F: +44 (0)1827 63362 | E:
technical@scolmore.com |
www.scolmore.com