SPK-SB150-081 Laser 2.1ch Soundbar with Wired Subwoofer User Manual
- June 11, 2024
- Laser
Table of Contents
SPK-SB150-081 Laser 2.1ch Soundbar with Wired Subwoofer User Manual
WHAT’S IN THE BOX
- Laser 2.1ch Soundbar
- Wired Subwoofer
- Remote Control
- Optical Cable
- Mounting Screws
- User Manual
SPECIFICATIONS
| Soundbar Rated Power | 30W |
|---|---|
| Subwoofer Rated Power | 30W |
| Speakers | 2 x 2.5 inch |
| Subwoofer | 5.25 inch |
| Frequency Response | 45Hz – 20kHz |
| Power Supply | 110V – 240V ~ 50/60Hz AC |
| Display | LED |
| Remote | IR |
| Remote Batter | 2 x AAA |
| Bluetooth Version | 5.3 |
| Bluetooth Name | SPK-SB150-081 |
| Bluetooth Range | 10 meters |
| Soundbar Dimensions | 800 x 78 x 68mm |
| Subwoofer Dimensions | 160 x 265 x 280mm |
PRODUCT DIAGRAM
- Power On/Off
- Volume +
- Volume –
- USB Input
- AUX Input
- Optical Input
- Subwoofer Output
- Subwoofer
- Power Input
REMOTE CONTROL
- Power
- Mode
- Volume +
- Previous
- Play/Pause
- Volume –
- Music EQ
- Movie EQ
- Bluetooth Pairing
- Reset
- Mute
- Next
- News EQ
- Repeat
SOUNDBAR CONNECTION METHODS
CONNECTION METHOD 1 (RECOMMENDED): OPTICAL
- Turn on the soundbar and set it to Optical mode.
- Connect an optical cable to the optical input on the soundbar and then to a TVs optical port.
- On the TV change the audio output to OPT, SPDIF, or
OPTICAL (this setting may have a different name based on your TV manufacturer
Note : Using the optical connection method the TV volume and soundbar
volume will both be heard, we recommend setting the tv volume to the lowest
setting or zero so that sound only plays through the soundbar.
CONNECTION METHOD 2: BLUETOOTH (TV)
- Turn on the soundbar and set the source to Bluetooth.
- On the TV change the audio output to Bluetooth.
- You may receive a prompt to confirm the connection on the TV. The soundbar name will appear as SPK-SB150-081
CONNECTION METHOD 3: BLUETOOTH (SMART DEVICE/COMPUTER)
- Turn on the soundbar and set the source to Bluetooth.
- On your computer/smart device, search for and select “SPK-SB150-081”.
- You may receive a prompt to confirm the connection on your Smart Device/Computer.
SOUNDBAR CONNECTION METHODS
CONNECTION METHOD 4: AUX
- Turn on the soundbar and connect a 3.5mm cable to the AUX input port.
- Connect the other end to the AUX/Headphone output on your TV.
- On the TV change the audio output to AUX/ Headphones.
BASIC OPERATION
- Connect the subwoofer to the soundbar via the subwoofer input.
- Connect both the soundbar and subwoofer to a power source. The soundbar enters standby mode.
- Insert 2 x AAA batteries into the remote.
- Press the power button on the remote or soundbar control panel.
- Switch the soundbar to the desired input mode using the MODE button on the remote. The available options are Bluetooth (BT), Optical (OPT), AUX and USB.
Note:
- For USB mode to work a USB flash drive (up to 32gb) containing MP3 files must be connected to the soundbar.
- The subwoofer connection is optional. Soundbar can operate without the subwoofer, however bass impact will be lessened.
TROUBLESHOOTING
NO SOUND COMING FROM THE SOUNDBAR.
- Check your soundbar is set to the correct input source.
- Check the soundbar connection to the source device(e.g. TV). Please refer to the soundbar connection methods in this manual for tips on connecting.
- Check the settings on your source device (e.g. TV). Please refer to the soundbar connection methods in this manual for tips on settings.
- Adjust the volume level on the soundbar or input device.
- Toggle the mute function on the soundbar or input device
SOUNDBAR NOT CONNECTING TO BLUETOOTH.
- Make sure the device you are connecting the soundbar to has their Bluetooth function enabled.
- Place the soundbar and device close to each other, wait approx. 1-2 minutes for your device’s Bluetooth list to update then search for and select SPK-SB150-081
- Make sure the soundbar has not already been paired to another device.
HEARING AN ECHO EFFECT OR SOUND COMING FROM BOTH SOUNDBAR AND TV.
- If you are using the optical connection method from the soundbar to the TV, then sound will play from both the soundbar and the TV as the optical connection does not override the TVs built-in speakers. We recommend setting the TV volume to the lowest possible setting or zero so that sound is only heard through the soundbar.
SUBWOOFER NOT WORKING
- Check the subwoofer is connected to the soundbar via the subwoofer input.
- Make sure the subwoofer is plugged in and turned on.
- Some audio tracks such as News broadcasts may not be outputting enough bass to be heard, please try audio with sufficient bass such as a music track.
Thank you for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
****
Visit our website
[www.laserco.com.au]](http://www.laserco.com.au)
Check us out at
www.youtube.com/lasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>