gosund SP1-H Smart Socket User Manual

gosund SP1-H Smart Socket

The Smart Socket SP1-H is a WiFi-enabled device that allows you to control your home appliances with your smartphone or tablet. The socket has a WiFi frequency of 2412MHz-2472MHz and WiFi Max. Transmitting Power of 20dBm.

Product Usage Instructions

1. Update your iPhone, iPad, or iPod touch to the latest version of iOS or iPadOS.
2. Sign in to iCloud with your Apple ID on every device to use and manage your home in the Home app on all of your devices. Then turn on iCloud Keychain and Home in iCloud Settings.
3. Connect the Smart Socket SP1-H to your home WiFi network.
4. Download and install the Smart Life app on your smartphone or tablet.
5. Follow the app’s instructions to add the Smart Socket SP1-H to your devices list.
6. You can now control your home appliances with the Smart Life app on your smartphone or tablet.

Product Package

1. Smart Socket
2. User Manual

LED Status Indication

Parameter

• Input: 230V~ 50/60Hz 16A Max.
• Output: 3680W Max.
• Working temperature: 0°C-35°C
• Wi-Fi frequency: 2.4GHz
• WiFi Frequency: 2412MHz-2472MHz
• Wi-Fi Max. Transmitting Power: 20dBm

Reset

• Turn on the power, hold the Switch / Pairing for 5 seconds and let go when the socket starts to flash quickly, the reset is successful.
• When the socket is in a new network environment, you need to restore the factory settings, and then reconnect to the network.

Warnings and Precautions

Important!

• Keep it out of the reach of children and pets.
• Do not use this product in humid environments or outdoors. It’s for indoor use only.

Add accessories

To add an accessory to the Home app, use your iPhone, iPad, or iPod touch. You can’t add accessories to the Home app on Mac. Before you set up your accessory, check these things first:

• Make sure that it’s powered on and nearby.
• Check your accessory’s manual to see if it needs additional hardware to work with HomeKit.

Then follow these steps:

1. Open the Home app and tap Add Accessory + or +.
2. Use the camera on your iPhone, iPad, or iPod touch to scan the eight-digit HomeKit code, or QR code on the accessory or accessory documentation.
3. When your accessory appears, tap it. If asked to Add an Accessory to Network, tap Allow.
4. Name your accessory and assign it to a room to help you identify it in the Home app and control it with Siri.
5. Tap Next, then tap Done.
   Some accessories, speakers, and smart TVs might require software updates or additional setup with the manufacturer’s app.

If you can’t add an accessory

• Update your iPhone, iPad, or iPod touch to the latest version of iOS or iPadOS.
• To use and manage your home in the Home app on all of your devices, sign in to iCloud with your Apple
• ID on every device. Then turn on iCloud Keychain an- d Home in iCloud Settings.

SP1 -H firmware update procedure

1. SP1-H updates its firmware automatically.
2. Once SP1-H conneted to the internet, it will check and download the latest firmware.
3. New firmware will take effect after next time bootup. During SP1-H updating firmware, red lights blink slowly.
4. When SP1-H update successfully, red lights blink quickly 4 times.

• Do not place this product near heating devices, such as microwave ovens, stoves, or radiators.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors and solvents.
• Do not disassemble, modify, or repair your device, and ask help from authorized professionals for device malfunction.
• Do not use the device when it is no longer working properly or visibly damaged.
• Do not store the device for extended periods in po- or ambient conditions.
• Do not insert your device to another one.
• Never use aggressive detergents such as rubbing alcohol or other chemical solutions because these could damage the casing or even impair the functioning of the product.

Note: The image shown in the manual is indicative only. If there is an inconsistency between the image and the actual product, the actual product shall govern.

After-sales

All products come with a limited warranty of 12 months from the date of purchase. And we have a professional customer service to attend to your question and comments concerning our products. Please do not hesitate to contact us.
Hereby, Shenzhen Cuco Smart Technology Co., Ltd declares that the radio equipment type ground smart plug is compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://files.innpro.pl/Gosund.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Contact Us
Manufacturer: Shenzhen Cuco Smart Technology Co.,Ltd
Address: Room201, 301, Building A, No. 12, Difu Road,
Guxing Community, Xi Xiang Street, Bao’an District,
Shenzhen, China, 518000.
Website: www.gosund.net
Email Support: service.eu@gosund.com

References

• Gosund
• INNPRO Sp. z o.o. Files

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>