JIREH CKA008 ODI Single Probe Instruction Manual
- June 11, 2024
- JIREH
Table of Contents
JIREH CKA008 ODI Single Probe
SPECIFICATIONS
Intended Use
The ODI is a clamp-on mini encoder. It is designed to provide encoded
linear position of probes in manual scanning operations.
Performance Specifications
- Wedge Width: 0 – 55 mm (2.16 in)
- Encoder Resolution : 16.00 counts/mm (406.4 counts/inch)
- Environmental Sealing: Watertight (submersible), Contact JIREH for details
Operating Environment
The ODI is designed for use in an industrial environment that is between -20°C
(-4° F) and 50°C (122° F).
PREPARATION FOR USE
Probe Attachment Encoder Setup Alternate Encoder Position
OPERATION
Hold the wedge flat against the scanning surface and scan straight in the desired direction, ensuring that the encoder wheel is in contact with the scanning surface and is rotating in the direction of the scan.
MAINTENANCE
Wipe the scanner clean as required. Do not soak or submerge the scanner in a cleaner or solvent of any kind.
TROUBLESHOOTING
SPARE PARTS
Encoder Connector Type
53158 Range Road 224, Ardrossan, Alberta, Canada, T8E 2K4 |
info@jireh.com
780.922.4534
jireh.com