BORMANN PRO BSS5300 350W Orbital Sander Instruction Manual
- June 11, 2024
- BORMANN PRO
Table of Contents
BORMANN PRO BSS5300 350W Orbital Sander
Product Information
The BSS5300 048220 is a power tool designed for sanding wood, plastic, composite, paint/varnish, filler, and similar materials. The product has a voltage/frequency of 230-240V~,50Hz and a power of 350W. It has a variable speed range from 4000 – 10000/min and a sanding pad diameter of 150mm. The product weighs 1.75kg and comes with safety features such as ear protection, goggles, and a breathing mask.
Product Usage Instructions
- Read all safety instructions: Before using the product, read all safety instructions to lower the risk of injuries. Save all warnings and instructions for future reference.
- Prepare the work area: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Keep children and bystanders away while operating a power tool to avoid distractions that can cause you to lose control.
- Follow additional safety instructions for sanding operations: Set a specific security guard for sanding and do not use sandpaper too oversized for sanding discs. Follow manufacturers’ recommendations when selecting sanding paper. More abrasive paper extending beyond the sanding pad presents a laceration hazard and may cause a crash, tearing of the disc or kickback.
- Wear safety equipment: Always wear ear protection, goggles, and a breathing mask to reduce the risk of injury. To protect your health, wear a P2 protective mask.
- Service the product: Have your power tool serviced by a qualified repair person using only identical replacement parts to ensure that the safety of the power tool is maintained.
- Intended use: The sanders are designed for sanding wood, plastic, composite, paint/varnish, filler, and similar materials as directed. The sanders are not intended to be suitable for grinding bare metal. Material containing asbestos cannot be processed.
WARNING! Please read all safety instructions and advises to lower the risk of injuries.
Safety Warnings
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool
Work area
- a ) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
- b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- b ) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
- f ) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
- a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- b ) Use safety equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- c ) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
- d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- e ) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- f ) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
- a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- c ) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- e ) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools oper-ation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
- f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- g ) Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is main-tained.
General safety instructions
-
This power tool is intended to function as a sander. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
-
Operations such as grinding, wire brushing, polishing or cutting-off are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.
-
Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.
-
The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.
-
The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
-
Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
-
Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time.
-
Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.
-
Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
-
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. -
Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
-
Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.
-
Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.
-
Regularly clean the power tools air vents. The motors fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
-
Do not operate the power tool near flammable materials. Sparks could ignite these materials.
-
Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.
Kickback and related warnings
Kickback is a sudden reaction to a pinched or attaching a rotating wheel, a
bearing pad, brush or any other accessory. Pinching or hanging causes rapid
stalling of the rotating accessory which in turn forced the tool Power out of
control in the opposite direction of rotation of the accessory to the point of
seizing. For example, if an abrasive wheel is snagged or pinched by the
workpiece, the edge of the wheel that is entering into the pinch point can dig
into the surface of the material, causing jumps or expulsion of the grinding
wheel. The wheel can jump towards the operator or by moving away, as the
direction of movement of the grinding wheel at the point of pinch. Abrasive
wheels may also break under these conditions. Kickback is the result of misuse
of the tool and / or procedures or conditions incorrect operation and can be
avoided by taking proper precautions specified below.
- Maintain firmly the power tool and position your body and arm for you allow to resist kickback forces. Always use auxiliary handle, where applicable, for maximum control of kickback or torque reaction during start-up. The operator can control the reaction torques or forces rebound, if precautions are taken.
- Never place your hand near the rotating accessory. The accessory can perform a bounce on your hand.
- Do not place you in the area where power tool will move if kickback. The rebound pushes the tool in the opposite direction to movement of the wheel in point hooking.
- Take special care when working corners, sharp edges etc.
Avoid twists and snaps of the accessory. Corners, edges or sharp twists tend to hang the rotating accessory and cause loss of control or kickback.
Additional safety instructions for sanding operations
Set specific security guard for sanding
a ) Do not use sandpaper too oversized for sanding discs. Follow manufacturers’ recommendations when selecting sanding paper. More abrasive paper extend-ing beyond the sanding pad presents a laceration hazard and may cause a crash, tearing of the disc or kickback.
Warning symbols
Machine-related safety instructions
Harmful/toxic dust can be produced during your work (e.g. lead-containing
paint, some types of wood and metal). Contact with this dust, especially
inhaling it, can represent a hazard for operating personnel or persons in the
vicinity. Comply with the safety regulations that apply in your country.
Connect the electric power tool to a suitable extraction system.
To protect your health, wear a P2 protective mask. Always wear protective goggles to protect against sanding hazards.
- Use a residual current protective device when metal grinding, as well as when the operation of the power tool in a wet environment cannot be avoided. In the event of an electric shock, the protective switch protects you against life-threatening current through the body.
- Clean work equipment soaked in oils, for example sanding pad or polishing felt, with water and allow to dry. Work equipment soaked in oil may combust spontaneously.
- Attention : Risk of fire! Avoid overheating the grinding material and the sander. Always empty the dust container before taking a break. Swarf in the filter bag or filter of the mobile dust extractor may self-ignite in unfavourable conditions such as flying sparks when grinding metals. Particular danger exists if the swarf is mixed with paint, polyurethane residue or other chemical materials and the grinding material is hot after long periods of work.
- Always use original sanding pads. Foreign pads are not suitable for the speed of the sander and may break.
- If the power tool is dropped or falls, check for damage to the machine and sanding pad. Remove the sanding pad for closer inspection. Repair damaged parts before using again. Broken sanding pads and damaged machines can cause injuries and machine instability.
Mixed dust containing metal and sanding damp surfaces
When mixed dust containing metal (such as dust resulting from paint sanding in
the automotive field) and when sanding damp surfaces, the following measures
must be observed for reasons of safety:
- Connect the machine to a suitable dust extractor.
- Regularly blow out the motor housing of the machine to remove dust deposits
Technical data
- Voltage/Frequency : 230-240V~,50Hz
- Power : 350W
- Speed (max.): 4000 – 10000/min
- Sanding pad diameter: 150mm
- Weight : 1.75kg
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired. To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer. Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Intended use
Sanders are designed for sanding wood, plastic, composite, paint/varnish, filler and similar materials as directed. With mixed dust containing metals (such as dust resulting from paint sanding in the automotive industry) and when sanding damp surfaces, special safety instructions must be followed. The sanders are not intended to be suitable for grinding bare metal. Material containing asbestos cannot be processed. The user is liable for improper or non-intended use.
Description of main parts
WARNING!
Unauthorized voltage or frequency! Risk of accident The mains voltage and
the frequency of the power source must correspond with the specifications on
the machine’s name plate.
Operating instructions
- The tool is intended to be operated as a hand held tool. The tool can be used in any position. Note! The sander can develop a torque reaction when started.
- Make sure the sander is switched off. Select a suitable abrasive and secure it to the backing pad. Make sure the abrasive is centred on the sanding pad. For optimal performance we recommend original sanding pad and Sanding paper.
- Switch on the sander by pressing the On/Off key, The sander can now be started by pressing the lever.
- The speed can be adjusted between 4,000 and 10000 rpm by rpm+ and rpm-. Each press increases or reduces the speed by 1,000 rpm until it reaches the limits.
- When sanding, always place the tool on the work surface before starting the tool. Always remove the tool from the work surface before stopping it. This will prevent gouging of the work surface due to excess speed of the abrasive.
- When sanding is finished, turn off the sander by pressing the On/Off key. The sander LED (right) is now turned off.
Replacing the sanding pad
Always disconnect the power before maintenance! Only use original sanding pad!
- Insert the pad wrench between the backing pad and brake seal to hold the spindle nut.
- Turn the backing pad counterclockwise to remove it.
- Fit and tighten the new backing pad with washers.
- Remove the pad wrench.
Attaching sanding accessories
The suitable sand paper and sanding cloth can be attached quickly and simply
to the sanding pad. Press the self-adhesive sanding accessory onto the sanding
pad. In the case of a weakening adhesive effect of the sanding paper surface,
the sanding pad accessories, in particular those which are not yet touching
the work piece, may come loose from the sanding pad and cause injuries.
Replace the sanding pad!
Dust extraction
WARNING! Dust hazard
Dust can be hazardous to health. Always work with a dust extractor. Always
read applicable national regulations before extracting hazardous dust. The
power tool does not have its own extractor unit. At the extractor connector, a
mobile dust extractor with an extraction hose diameter of 40mm should be
connected. Recommendation: Use an antistatic suction hose. This helps reduce
the electric charge.
Description of main operation
Risk of injury: Always secure the workpiece in such a manner that it cannot
move while being machined.
Observe the following instructions:
- The sanding capacity and quality are mainly dependent on the selection of the correct abrasive.
- Hold the machine with two hands, one on the motor housing and one on the gear head.
Sanding applications
9000-10000/min
- Sanding with max. abrasion
- Sanding off old paint
- Sanding of wood and veneered surface prior to paintwork
- Intermediate sanding of paintwork on surfaces
8000-9000/min
- Sanding thinly applied undercoat
- Sanding wood with sanding cloth
- Edge breaking on wooden parts
- Smoothing primed wooden surfaces
7000-8000/min
- Sanding solid wood and veneered edges
- Sanding rebate of windows and doors
- Intermediate sanding of paintwork at edges
- Light sanding of natural wood windows using sanding cloth
- Smoothing wooden surfaces using sanding cloth before staining
- Rubbing or removing excess limestone residue using sanding cloth
6000-7000/min
- Intermediate sanding of paintwork on stained surfaces
- Cleaning natural wood window rebate using sanding cloth
4000-6000/min
- Sanding stained edges
- Sanding of thermoplastics
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste. This means that this product shall not be discarded with household waste but that it shall be returned to a collection system which conforms to the European WEEE Directive. Contact your local authorities or ask for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances WWW.NIKOLAOUTOOLS.GR
WARRANTY
The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use and 6 months for batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.
WARRANTY EXEMPTIONS AND RESTRICTIONS:
- Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chokes etc.).
- Tools damaged as a result of non-compliance with the instructions of the manufacturer.
- Tools poorly maintained.
- Use of improper lubricants or accessories.
- Tools given to third entities free of charge.
- Damage due to an electrical connection at a voltage other than that indicated on the appliance plate.
- Connect on to a non-earthed power supply.
- Change in current voltage.
- Damage resulting from the use of salty water (e.g., washing machines, pumps).
- Damage or malfunction resulting from improper cleaning procedure of the tool.
- Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
- Tools that have been modifi ed or opened by unauthorized personnel.
- Tools used for rent.
The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the tool with another corresponding model. After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. Replacement of a spare part with repair charge is covered by a 1 year warranty of good operation, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.
WARRANTY
This appliance is a quality product. It was designed in compliance with
current technical standards and made carefully using normal, good quality
materials. The warranty period is 24 months for non-professional use and 12
months for professional use and commences on the date of purchase, which can
be verified by the receipt, invoice or delivery note. During this warranty
period all functional errors, which, despite the careful treatment described
in our operating manual, are verifiably due to material flaws, will be recfied
by our after-sales service staff . The warranty takes the form that defective
parts will be repaired or replaced with perfect parts free of charge at our
discrete on. Replaced parts will become our property. Repair work or the
replacement of individual parts will not extend the warranty period not will
it result in a new warranty period being commenced for the appliance. No
separate warranty period will commence for spare parts that may be ted. We
cannot offer a warranty for damage and defects on appliances or their parts
caused by the use of excessive force, improper treatment and servicing.
This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are are ributable to improper handling, over loading, or natural wear and tear are excluded from the guarantee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the after-sales center: Subject to change without prior notice.