dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen User Manual

June 11, 2024
Dahua

dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen
logo

dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen

dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen product

Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

Electrical safety
All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electric shock caused by improper handling or installation.

Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.

Installation
Do not apply power to the product before completing installation. Always follow the instruction guide the manufacturer recommended.

Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

Environment
This series product does not have the waterproof capability. It is for indoor use only. This series product should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. Please keep it away from the electromagnetic radiation object and environment.
Please keep the sound ventilation. Do not allow the water and other liquid falling into the product.

Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance work. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the device.

Accessories
Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.

 General Introduction

Front Panel

The front panel is shown as below. dahua DHI-MLCDF7-E 7 Inch Vehicle Touch
Screen 01Please refer to the following sheet for detailed information.

Icon Function Icon Function
Touch screen on-off button ![dahua DHI-MLCDF7-E 7 Inch Vehicle Touch

Screen 06](https://manuals.plus/wp-content/uploads/2023/05/dahua-DHI- MLCDF7-E-7-Inch-Vehicle-Touch-Screen-06.png)| Snapshot button
| Touch screen indicator light
The indicator light is on when the touch screen is working.| | Brightness button. There are five levels (1 to 5).
| Menu button. Click to call menu interface.| | Decrease volume
| Exit button. Click to go back to previous interface.| | Increase volume

Cable Connection

Please refer to dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen
10for cable connection information.
Connect the cable of the touch screen (10-pin aviation cable) to the VGA port of the mobile DVR/NVR. dahua DHI-MLCDF7-E 7 Inch Vehicle Touch Screen
11Please refer to the following sheet for detailed information.

Pin SN Function Pin SN Function
1 12V+ 6 VGA_B
2 GND 7 VGA_R
3 VGA_G 8 Uart_TX
4 Uart_RX 9 VGA_BS
--- --- --- ---
5 Audio_In 10 VGA_VS
 Bracket Installation (Optional)

Please follow the steps listed below for bracket installation information.

  • Take the touch screen and the bracket out of the box.
  • Line up the bracket to the concave of the monitor.
  •  Move the bracket along the slider to the proper position.
  • Turn the black nut clockwise to secure the bracket.
Touch Screen Function

Please refer to the following contents.

  •  Tap to control: Tap the button or the window on the screen to set or operate.
  •  Hand gesture to control: In 1-window mode, if it is the PTZ camera, use one hand to move up/down/left/right to control the PTZ. Use zoom in/zoom out hand gesture to control the PTZ focus and zoom rate (Make sure the connected device supports these function).

 Specifications

Please refer to the following sheet for specification information.

| Name| Specifications
---|---|---
System| Resolution| 1024600
Video Input| VGA input(1024
768, 1024600, 800600, 800*480)
Operation Mode| Multitouch to control, button control.
Touch Screen Type| Capacitive screen, 10 touch point to control. Hand gesture slides, zoom in/zoom out.
Button Amount| 7
Power

Protection Circuit

| Misconnect power positive and negative end will not result in device damage.
Audio| 1-channel audio input (5Vpp)
Speaker output (8Ω 1W)
General| Voltage| DC 12V±10%
Power Consumption| ≤6W (At the highest brightness status)
Working Temperature| -20℃~+65℃
Working Humidity| 0~90%
Air Pressure| 86kpa-106kpa
Net Weight| 450g
Screen Dimensions(mm)| 181.4mm×121.6mm×27.7mm
Default Cable Length (mm)| 1000mm

Note

  •  This user’s manual is for reference only. Slight difference may be found in user interface.
  •  All the designs and software here are subject to change without prior written notice.
  •  All trademarks and registered trademarks mentioned are the properties of their respective owners.
  •  If there is any uncertainty or controversy, please refer to the final explanation of us.
  •  Please visit our website for more information.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals