anko 43261093 Headband Kit User Manual

anko 43261093 Headband Kit

Make Your Own Head Band Kit

WARNING:
CHOKING HAZARD – SMALL PARTS.
NOT FOR CHILDREN UNDER 3 YEARS.

Make Your Own Braiding Friendship Bracelets Kit

How to use the braiding wheel

1. Fold four threads in half and tie with a small loop at the head. Then place the loop in the middle of the foom braiding wheel and hold the four threads at positions 1.9.17 and 25
2. Put the thread which is on the right of position 1 to the left of position 16.
3. Put the thread which is on the right of position 17 to the left of position 32.
4. Rotate the foam braiding wheel in 90° counterclockwise.
5. Repeat steps 2-4 until the bracelet is a suitable length (the numbers of positions are changed with the angle). Slide the beds through the threads to decorate your bracelet.
6. Take off all the threads and the a knot, cut off the extra threads (scissors not included).

Based on basic method, you can try advanced methods.

1. Change the colour and position of the threads in step 1 to create different brocelets. (Above figures for reference),
2. Increase the position of threads and follow steps 2-6 to create wider bracelets. (Rotation angle can be changed according to the number of positions).
3. Put multiple threads in the same position to thicken your brocelet.
4. Decorate your bracelets with assorted beads.

How to make the braid

1. Fold three threads in half and tie with a small loop at the head.
2. Cross threads A over threads C.
3. Cross threads B over threads A
4. Repeat steps 2-3 until the bracelet in a suitable length, and slide the beads through the threads to decorate your bracelet. Tie a knot with all the threods in the end and cut off the extro threed (scissors not included).

Based on basic braid method, you can try to increase the threads to make your braid wider

1. Fold four threads in half and tie with a small loop at the head.
2. Cross threads A over threads B and cross threads. C over the threads D.
3. Cross threads D over threads A.
4. Repeat step 2-3 until the bracelet in a suitable length, and slide the beads through the threads to decorate your bracelet. Tie a knot with all the threads in the end and cut off the extra thread (scissors not included).

WARNING:

• LONG CORD AND SMALL PARTS. STRANGULATION AND CHOKING HAZARD. NOT FOR CHILDREN UNDER 3 YEARS

• THE PROCUCT CONTAINS FUNCTIONAL SHARP POINTISM/SHAPY EDGEISI. PLEASE USE AS INTENDED.
  ADULT SUPERVISION IS RECOMMENDED.

• CHOKING HAZARD SMALL BALL NOT FOR CHILDREN UNDER 3 YEARS.

• NOT SUITABLE FOR CHILDREN UNCER 3 YEARS AS FOMN PEDES MAY BREAK OFT AND DAUSE A CHOKING HAZARD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>