MONSTER Airmars XKT08 Pro Wireless Gaming Headphones Instruction Manual
- June 11, 2024
- Monster
Table of Contents
MONSTER Airmars XKT08 Pro Wireless Gaming Headphones
Product parameters
- Bluetooth version: V5. 3
- Transmission distance: ≥10m
- Driver diameter: 13mm
- Driver impedance: 32 £+15%
- Sensitivity: 109+3dB
- Frequency response: 20Hz-20kHz
- Battery capacity (charging case): 300mAh 3.7V
- Battery capacity (headphone): 33mAh 3.7V
- Charging time (charging case): ~1.5 hours
- Music playtime (headphone): ~ 5 hours
- Music playtime with charging case: ~ 24 hours
Packing list
Product Schematic Description
(Charge the charging case)
Connect the charging case to the SV power adapter with Type-C charging
cable.
- Rated lnput: 5V=30mA (Headphone)
- Rated lnput: SV= 300mA (charglng case)
Tips: When the ice blue indicator flashes while closing the cover, please charge in time.
(Indicator guide)
Product operating InstructIons
- Poweron
- Method l: Take out the headphones from charging case, the headphones will turn on automatically.
- Method 2: Long press MFB for 3 seconds.
- Power-off
- Method l: Put the headphones into the charging case and close the cover.
- Method 2: After disconnected from the bluetooth deviee for 3 minutes.
- Palrlng
- Method l: Take out the headphones from the charging case, the headphones will start pairing automatically.
- Method 2: Search and click for “Monster Airmars XKTOB Pro”on the bluetooth list of the smart device, and when connection Is successful, “Connected” wll be heard.
If the distance Is exceeded, return to the effective distance within 3 minutes
after disconnection, and automatically connect the device. 
Note:
- If the product is not suitable for a long time, it should be fully charged and ensure that the device is in a shutdown state .
- After charging, please pull out the charging cable to avoid equipment damage caused by long-time charging.
Touch key operation
- Normal
- Music mode
- Phone
- Game mode/music mode switch: Device connected
Restore factory settings
Either headphones Is not connected to the bluetooth device when turned on.
click the MFB 5 times to clear the previous pairing Information and turn off.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ham,ful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause ham,ful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause ham,ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interterence, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
FCC ID:2A8PV-QSMT08P
Precautions
- Headphones will turn on automatically (needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
- Keep the battery (battery pack) away from inflammable or excessive heat such as direct sunlight.
- Due to the wireless connection mode of this product, in the daily use process, influenced by the environment, mobile phone brand, usage behavior and other factors, it is normal that there may be a brief and slight sound delay in the process of playing music.
Warnings
- Do not use headphones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise, warranty will be voided
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
This table is compiled according to SJ/T 11364.
- O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
- X: Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
Environment-Friendly Use Period (EFUP”
The period of use of this symbol (10 years) is the period during which
harmful substances in electronic and electrical products will not leak or
mutate under normal use conditions, and users of electronic products will not
cause serious pollution to the environment or serious damage to their personal
and property when using this electronic product.
Warranty service
Dear user, this warranty card is the proof of your future warranty application with the seller to fill it out and keep it for future use!
User information
- User name: ____
- Contact number: ____
- Mailing address: ____
- Email: ____
- Postal code: ____
Product information
- Product name: ____
- Product barcode/Serial number/Batch number: ____
- Product number: ____
Vendor information
- Name: ____
- Address: ____
- Contact number: ____
- Sales date: ____
- Remark: ____
- Postal code: ____
- Invoice number: ____