rizoma PT539 Fox Plate Holder Kit User Manual

rizoma PT539 Fox Plate Holder Kit

Product Information

The Rizoma product is a license plate holder designed for use on motorcycles. The product comes with accessories and instructions for installation. The product is not guaranteed to be compatible with all motorcycles or aftermarket equipment. It is recommended to contact an authorized Rizoma dealer for assistance.

General Conditions

1. It is essential to read and follow the instructions carefully.
2. All tightening should be done after the correct positioning of the accessories without restricting the moving parts.
3. After installing any Rizoma product, check that all related components of the motorbike function correctly.
4. Rizoma products require regular inspection and maintenance.
5. Never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.

Product Usage Instructions

The license plate holder can be installed using the following steps:

Installation of Plate for Medium/Large License Plate

1. Attach the plate holder with part number PT539 to the motorcycle.
2. Install the plate for small license plate with part number PT539.
3. Install the universal license plate with part number PT539.
4. Install the pin of positioning with part number PT539.
5. Install the license plate.

Difficulty Level

The installation difficulty level is simple and can be completed with basic tools. The time required for assembly is 25-30 minutes.

Note:

If you have any doubts regarding the installation or use of your Rizoma product, please contact an authorized Rizoma dealer for assistance.

Before you start

We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

General conditions

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
   Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
   O.E.M.: original equipment manufacturer.

License plate

To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as the enclosed instructions.
Consult the website www.rizoma.com, in license plate support section click “MEDIA” to download the PDF document approval ABE.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning:Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.

WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.

INSTALL PLATE FOR MEDIUM

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

POSITIONING WIRINGS IN THE SUPPORT

Step 8

INSTALL LICENSE PLATE

Step 9

Step 10

INSTALL EXHAUST KIT

Step 11

Step 12

Step 13

DISASSEMBLE ORIGINAL WIRING

Step 14

ELECTRIC CONNECTIONS

Step 15

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Some of our products may not be approved for road circulation in the countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>