SJCAM SJ10 Pro 4K Action Camera User Manual
- June 11, 2024
- SJCAM
Table of Contents
SJ10 Pro 4K Action Camera
User Manual
Silos PRO Dual Screen Action Camera
SJ10 Pro 4K Action Camera
USER MANUAL
SJCAM SJ10PRO Dual Screen Action camera is designed for market demand and
trends, with a wide variety of features, including HD digital video shooting,
audio recording, photo shooting, and WIFI wireless remote control. Detachable
battery, waterproof case and all other accessories enable the SJ10PRO dual-
screen camera to be perfectly applied to a variety of outdoor sports,
motorcycle cycling or driving records. Please read the user manual carefully
before using the camera for the first time.
Operating Safety Guide
- Do not approach the product to objects with strong magnetic field, such as magnet or motor. Avoid bringing the product close to objects that can emit strong radio waves to avoid product failure or damage to the image / audio caused by strong magnetic field and radio waves.
- Use the micro SD card of regular brands. (SD card of U3 and above standard is recommended, 32GB, 64GB and 128GB is supported)
- Waterproof instructions: 5 meters waterproof without case and 30 meters with waterproof case is supported.
- Do not close the micro SD card to objects with strong magnetic field to avoid the loss of data stored in the card.
- Pull out the charging device immediately and stop charging to avoid fire if the product is heating, smoking or smelling during the charging.
- Put the product out of the reach of the children when charging to avoid potential accident.
- Put the product in a cool, dry and dusty place. Wipe the lens with a soft cloth. Please recycle this product or its battery to official recycling sites, and do not abandon it in the waste.
- This is a high-precision product, do not drop or collide. Do not expose the product to high temperature or direct sunlight.
Do not disassemble the product without authorization. Please consult customer service for any product fault or other questions.
Product Description
Power button/ OK button: long press of 3 seconds for camera turning on/
off; short press for photo taking, video shooting or confirming.
Front screen: 1.3-inch LCD front screen
Charging interface: Type-C
Back/ Main screen: 2.33-inch LCD touch screen
Memory card slot : Memory card is required for camera use (the memory
card slot is in USB compartment)
Troubleshooting of memory card failure to read:
Be sure to format the micro SD card before using for the first time. Format
the memory card regularly to keep it intact.
Format the memory card: enter the setting interface, find the formatting
option and confirm.
Waterproof Housing Operating Instructions
Open the waterproof housing
- Waterproof: 5 meters waterproof without case and 30 meters with waterproof case is supported.
- Follow the graphic tutorial to avoid damage when opening the waterproof case for the first time(refer to the instructions above).
- Take the camera out and put a paper in the waterproof case to test in the water.
- Check that the leakproofness of waterproof case every time before putting in water.
- Wipe the beads outside the waterproof case to avoid water intake before opening.
- Do not expose the waterproof case to the sun. Wipe the water beads or dry naturally after using.
Battery Compartment/Memory Card
Operating Instructions
-
Open the battery compartment
Open the battery cover by pressing the button and sliding to the side. -
Insert a micro SD card
Here is the memory card slot, high-quality micro SD card of big brands is recommended
Specification
| Master chip | Ambarella H22 585 |
|---|---|
| Image sensor | SONY IMX377 |
| Aperture | F2.8 |
| Focal length | 3.3mm |
| Screen(dual) | 2.33″ LCD Touch screen I 1.3″ LCD display screen (front screen) |
| Video resolution | 4K(3840*2160)24/25/30/S0/60fps |
4K Ultra(38402160)24/30fps
2.7K(27201520)24/25/30/50/60fps
1440(25601440)24/25/30/50/60fps
1080P(19201080)24/25/30/S0/ 60/120fps
1080 Ultra(19201080)30/60fps
720(1280720)240fps
Audio| Microphone and speaker Single microphone and stereophonic speaker
External microphone| Supported
Video format| MP4
Video encoding format| H.264/H.265
Photo resolution| 20M(54723648 3:2)
12M(40003000 4:3)
8M(38402160 16:9)
5M(25921944 4:3)
2M(19201080 16:9)| 16M (46083408 3:2)
10M(36482736 4:3)
8M(32642448 4:3)
3M(2048*1536 4:3)
Photo format| JPG
WIFI| 2.4G/5G
Frequency| 50Hz/60Hz
battery ca pa city| 1300mAh Removable
USB interface| TYPE-C
Storage| Micro SD card, support 32GB, 64GB, 128GB
Power| 5V2A
Video output| AV
Battery life| 80 minutes for 4K/30fps
Charging time| about 3 hours
Size| 64.45X44.5X30.6mm
Weight| 112.Sg
Operation system| Windows7.8X/OS X ® version 10.8 or advanced
Language support| English / Simplified Chinese/ Traditional Chinese/ French /
German / Spanish / Italian / Portuguese/ Japanese/ Russian / Polish / Czech
/Slovene/ Hungarian / Danish/ Dutch / Turkish / Finnish / Roman
Front and Baek Screen Switching Instructions
- Press the power button twice to switch between the front and back screen;
- Double-click the touch screen screen to switch to the small screen.
Operation Guide Drop Down Screen
Quick settings: WIFI connection, remote control, FPV, screen lock
Pull up screen
Quick settings: video mode, photo mode
Video recording
Turn on the camera to enter video mode, press on OK button to start video
recording. Or swipe up the screen to enter mode menu, click the video icon to
enter the video mode, and press the OK button to start video recording.
Note: The camera will remember the mode set before turning off.
Photo taking
Turn on to enter standby state, slide the screen left / right to switch to
photo mode. Or swipe up the screen to enter the mode menu, click the photo
icon to enter the photo mode, and press the OK button to take a picture.
Playback
When the camera is on standby state, click the playback icon in the lower left
corner of the screen to view videos or photos that have been taken.
Media Settings menu / System Settings menu:
Media Settings menu: When the camera is on standby state, click the icon below
the screen to enter the current mode Media Settings menu interface to set the
relevant parameters.
System Settings menu: click the setting icon in the lower right corner to
enter the camera system Settings menu.
Remote controller
When the camera is on standby state, slide down the screen, click the remote
control icon in the menu and agree to match, as the camera is in matching
state, press the photo and video buttons on the remote controller at the same
time, the camera screen will show if successfully matched.
Note: The remote controller is not a standard accessory and needs to be
purchased separately
Remote Control Button Description
- Shutdown button: Turn off the camera
- Photo button: Take a photo
- WIFI button: turn on/ off wife
- Video button: Start / stop video recording
Note: The remote controller is not a standard accessory and needs to be purchased separately
WiFi Connection
This product can be connected to smartphone or tablet (Android or 105), please
operate as the following steps.
-
install the software “SJCAM Zone” on the smartphone or tablet (Android or 105). Scan the corresponding QR code on this manual or visit the official website WWW.SJCAM.COM to download.
-
Turn on the camera and slide down the screen, click the WIFI icon to turn on the WIFI.
-
Turn on the WIFI function on the smartphone or tablet, search for the camera WIFI name and connect.
WIFI name: SJ10Pro DualScreen_XXXXXXXX
Initial password: 12345678 -
Enter the APP for operation if successfully connected.
App Download
|
---|---
https://itunes.apple.com/us/app/sjcam-zone/id991679682?mt=8|
http://android.sjcam.com
Scan the code and download the APP
This product can be connected to smart phones and tablets (Android or IOS
system).
Packing List
Accessories Introduction
3M sticker: spare sticker for helmet base installation. It can also be
used to reinforce in the gap when the curve of helmet position is too large.
Wiper clean the camera lens, camera body, etc.
Lens protector. Cover the lens without using the camera to prevent it
from accidentally scraping.
Data/ Charging cable: for charging the camera or connecting to the
computer to transfer data.
Accessories Installation Tutorial
Product features may change with product upgrades or updates, please refer
to the actual product specifications.
For additional support requests or technical questions, please contact SJCAM
customer service.
Welcome to visit the official website of SJCAM
www.sjcam.com or call the service hotline:
+086-18118714563
Made by Shenzhen Zhen Cheng Technology Co.,Ltd.
3/F Building C, NO.2 Road 1, Shangxue lndustrialArea
Bantian, Longing District, Shenzhen, China
Technical Support Email :support@sjcam.com
Official website : sjcam.com
Made in China