GOODWE 340-00622-03 4G Kit-AF Module Installation Guide

340-00622-03 4G Kit-AF Module
Installation Guide

4G Kit-AF
Quick Installation Guide
V1.3-2023-03-08

340-00622-03 4G Kit-AF Module

  These instructions will be updated from time to time due to product version upgrades or for other reasons. Unless otherwise specified, they are not a substitute for the safety
instructions given on product labels or in user manuals. All descriptions in the document are intended only as user instructions.
4G Kit-AF only for North America.

Technical Data

Applications

Information regarding the SIM operators, inverter models and versions supported by 4G modules will be updated from time to time, and the latest support details  can be obtained by scanning the QR code.
Download the latest version of Solar Go App and SEMS Portal APP from Google Play or App Store.

https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_4G%20Module%20-%20Supported %20Operators-North%20America.pdf

Installation and Commissioning

Installing Bluetooth module

• When installing the Bluetooth and 4G modules, make sure the inverter is powered off.
• During installation, wear antistatic gloves, and take electrostatic protection measures.

1. Check that the items delivered are correct.
1 x 4G module
1 x Bluetooth module
1 x 4G antenna
2 x Quick Installation Instructions| 2. Install Bluetooth module.
USB Communication
Interface
---|---

Setting APN parameters

Before setting the parameters, make sure that:

1. The inverter is powered on.
2. Communication is functioning properly between Bluetooth module and inverter.
3. The Solar Go APP has been downloaded from Google Play or App Store. (Solar Go with V5.0.0 or newer version in Android system or with V5.0.0 or newer version in iOS system is required. )
4. The procedure is basically identical for Android and iOS operating systems, with only slight difference between the interfaces. These instructions use the iOS  operating system as an example.
5. Please use the initial password when logging in for the first time, and change it as soon as possible to one that is memorable for you. To keep your account  secure, it is recommended to change your password regularly.

http://www.sems.com.cn/home/solargo

Installing 4G module

• When installing the Bluetooth and 4G modules, make sure the inverter is powered off.
• During installation, wear antistatic gloves, and take electrostatic protection measures.

Powering on the device

1. Power on the inverter, thus powering on the 4G module.
2. Observe the status of the indicators on the 4G module and the inverter. (When the communication indicator on the inverter is ON continuously, it means that  communication is functioning properly. For other indicator status, refer to the User Manual of the relevant inverter model.)

SIM card is not inserted or it has a loose connection. Insert the SIM card, or remove it and then re-insert.
Flashing slowly
(On for 1.8s, Off for 02s)| Normal| Standby
Abnormal| If the indicator stays in this state for an extended period (more than 5 minutes), the APN is set incorrectly, the SIM card has no signal, the signal strength is weak, or there is no data. Please check the APN information and reset the APN parameters on the Solar Go App. Contact the operator to verify the SIM card signal. Check whether the SIM card credit and data are sufficient. If not, please top up.
Flashing rapidly
(On for 0.125s, Off for 0.125s)| Normal| Data uploading

Device Replacement

1. Before replacing the 4G module, check that the inverter is powered down, and the new 4G module is ready for installation.
2. Remove the 4G module.
3. (Optional) If SIM card is bound to an existing device, consult the operator to unbind it.
4. Install the new 4G module.
5. Power on the inverter.

Good We Technologies Co., Ltd.
No. 90 Zain Rd., New District, Suzhou, China
www.goodwe.com
service@goodwe.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>