OUKITEL C90 Pro Smartphone User Manual

June 11, 2024
OUKITEL

C90 Pro Smartphone
User ManualOUKITEL C90 Pro Smartphone Website: oukitel.com

C90 Pro Smartphone

OUKITEL C90 Pro Smartphone - overview

Accessories

OUKITEL C90 Pro Smartphone - overview 1

Battery

C90 Pro includes an internal battery.You can track your battery status with the icon showed on the top right of the screen.
OUKITEL C90 Pro Smartphone - overview 2 Warning

  • Use only OUKITEL-approved batteries specifically designed for you phone.
  • Incompatible batteries can cause serious injuries or damage to your phone.
  • Never place batteries or phones on or in heating devices such as microwave ovens,stoves,or radiators.Batteries may explode when overheated.

OUKITEL C90 Pro Smartphone - overview 3

How to insert the card

To make sure your pad is able to make calls, insert the SIM card in the following order.

  • Insert and press the ejector pin into the hole in the side to pop the card tray.

  • With the pad facing up, insert the cardholder into the pad in the direction of the arrow.OUKITEL C90 Pro Smartphone - overview 5

How to boot

Non-removable battery
Press the power button for 3-5 seconds to boot

How to send SMS, MMS

SMS

  • Open the SMS app
  • Select New Information
  • Enter a phone number or browse your contacts
  • Select Edit Information and enter your text
  • Send >

MMS-video

  • When writing a text message
  • Select images, videos, or other files you want to add, even you can take a new picture or video right away
  • Selecting or sending J»

Language switching settings

  • Main menu–settings system—language and input method Language and input method—language–language adding
  • Select the language you need, the system will automatically
  • jump back to the language interface
  • Select the icon after the language bar and drag it to the first one

SAR

  • The maximum electromagnetic radiation absorption ratio (SAR) of this product is <2. 0W/kg
  • In line with the requirements of the national standard

EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;
EN 50360:2017; EN 50566:2017;

Safety- In order to ensure safety during use of the product, you must

strictly abide by the following rules

  • The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket .
  •  Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating of the battery can cause an explosion.
  •  When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
  • If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
  • Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
  • Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
  • Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive extemal pressure, Which may result in internal short-circuit and overheating of the battery.
  • The company does not bear responsibility for accidents caused by non-standard related charging equipment.

If you want to read the full CE compliance, please check this link: http://www.oukitel.com

Maintenance

  • Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
  • Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other
  • Please avoid dropping, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
  • Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water and mild soap.
  • Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
  • When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
  • This machine’s standard package (Package box-Pad-Manu-al-Protective film-Protective case-Headset-USB data cable-OTG cable-Charger)

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientifi  organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 Wikg averaged over one gram of this Smart Phone (FCC ID: 2ANMU-C90PRO) has been tested against this SAR limit. SAR information on this can be viewed on- line at http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for search. This
device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, 10mm separation distance should. maintained to the user’s bodies
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2ANMU-C90PRO
RF Specification:

Function Operation Frequency Max RF output power: Limit
BLE 2402MHz-2480MHz -5.6 dBm 20 dBrn.
BT(BR+EDR) 2402MHz-2480MHz 523 dBm 20 dBm.

WIFI 802.11b/g/
n(HT20/40)| 802.11b/g/n(20MHz): 2412-2472MHz.
802.11n(40MHz):2422-2462MHz| 16.2 dBm| 20 dBm.
Wi-A
5.2G(802.11a/n20/n40/
ac20/ao40/ac80)| 802.11a/ n20/ac20:5180MHz-5240MHz
802.11 n40/ac40:5190MHz-5230MHz
802.11 ac80:5210MHz| 10.2 dBm| 23 dBm.
Wi-Fi
5.8G(802.11a/n20/n40/
ac20/ao40/ac80)| 802.11a/ n20/ac20:5180MHz-5240MHz
802.11 n40/ac40:5190MHz-5230MHz
802.11 ac80:5210MHz| 10.91 dBm| 23 dBm.
GSM/GPRS/EGPRS
900| TX(UpGrik):880M-915MHZ:
RX(Downlink):925M-960MHZ| 32.41 dBm| class 4 (33s3dBm)
GSM/GPRS1EGPRS
1800| TX(Uplink):1710M-1785MHZ:
RX(Downlink):1805M-1880MHZ| 29.43 dBm| class 1 (30±3dBm)
WCDMA BI| TX(UpGrik):1920-19130MHz:
RX(Downlink):2110-2170MHz| 23.54 dBm| 24 (dBm) +1.7/-3.7 (dB)
WCDMAI38| TX(Uplink): 880-915MHz:
RX(Doymlink):925-960MHz| 2243 dBm| 24 (dBm) +1.7/-3.7 (dB)
LTE FDD Bt| TX(UpGrik):1920-1980MHz:
RX(Downlink):2110-2170MHz| 24 29dBm| 23(dBm) 22.7(dB)
LTE FDD B3| TX(Uplink) :1710-1785MHz:
RX(Dowrdink):1805-1880MHz| 24.35 dBm| 23(dBm) 22.7(dB)
LTE FDD B7| TX(Uplink) :2500-2570MHz:
RX(Downlink):2620-2690MHz| 24.06 dBm| 23(dBm) ±2.7(48)
LTE FDD 138| TX(Uplink): 880MHz to 915 MHz
RX(Downlink): 925 MHz to 960 MHz| 23.67 dBm| 23(dBm) 12.7(013)
LTE FDD B20| TX(UpGrik) 832MHz-862MHz:
RX(Downlink)791MHz-821MHz| 23.32dBm| 23(dBm) ±2.7(48)
NR TDO n78| Uplink 8 Downlink: 3300 MHz to 3800 MHz| 23.34 dBm| 23(dBm) +10/4.0 (dB)
EN DC_20A_n78A| Band 20: TX(Uplink) 832MHz-862MHz:
RX(Dovmlink)791MHz-821MHz Band 78′ Uplink 8 Downfink: 3300 MHz – 3800 MHz| 25.34 dBm| 23(dBm) +3.0/4.0 (dB)
NFC| 13.56MHz| 17.94dBuA/10m| 60 dBuA/10m
FM| Rx(Downlink): 87.5MHz-108MHz| | —
FPS| Rx(Downlink): 1.57542GHz| |

Warning:

  1. Use careful with the earphone maybe possible excessive sound pressurefrom earphones and headphones can cause hearing loss.
  2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
  3. The product shall only be connected to a USB interface of version USB2.0.
  4. Adapter shall be installed near the equipment and shall be easily accessible.
  5. Operation temperature:-10~40ºC.
  6. The plug considered as disconnect device of adapter.
  7. SAR: The device complies with RF specifications when the device used at 0.5cm from your body (SAR limit 2.0 W/Kg). The device is in compliance with the requirements.

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE),, Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK

www.oukitel.comOUKITEL C90 Pro Smartphone - qr
code Manufacturer Name: ShenZhen YunJi Intelligent Technology CO., LTD
Manufacturer Address: A-side A2 Building 2/F Enet New Industrial Park,No.20 Dafu
Industrial Zone, Aobei Community, GuanLan, LongHua New District, ShenZhen China
OUKITEL C90 Pro Smartphone - icon Comes with the GoogleTM app and Google ChromeTM .
Android is a trademark of Google LLC

Documents / Resources

| OUKITEL C90 Pro Smartphone [pdf] User Manual
C90 Pro Smartphone, C90 Pro, Smartphone
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals