MONSTER MLB-2059-RGB Smart Sound Reactive RGB+W Light Strip User Guide

MLB-2059-RGB Smart Sound Reactive RGB+W Light Strip
User Guide

SMART SOUND REACTIVE
RGB+W LIGHT STRIP
QUICK START GUIDE
mL-7 1Th RUB VI I OLV1

GETTING STARTED

Thank you for choosing the Smart RGB Light Strip by Monster Smart Luminescence. This Quick Start Guide will help you with setup and installation of your deuce.

WHAT’S IN THE BOX

• 32.8ftA0m (2x 16.4f1/5m) Smart RGB Light Strip with preinstalled mounting adhesive
• Via Controller
• 12V 2A Power Adapter (5ft/1.5m)
• Mounting Clips + Screws (optional)
• Quick Start Guide

WHAT DO YOU NEED?

• Smartphone or tablet with Android™ 5.0 Marshmallow or higher / iOS 10 or higher
• Wi-Fl router with an Internet connection
• Rubbing alcohol to clean the installation surface

Before setup. make sure your phone or tablet is connected to the 2.4GHz WI-FI network that your LED Strip will be placed on. For easier pairing, turn on Location and Bluetooth to quickly find nearby devices.
TIP: Do you know your W-Fi network name and password? Write it down now if it’s hard to remember.
ANYTHING ELSE?
Your LED Light Strip comes with preinstalled mounting adhesive. but you could use the included mounting clips and screws if you would like a more permanent installation You will need a Phillips head screwdriver to Install with the clips.
TIP: Save these instructions for future reference.

SETUP COMPLETE SETUP BEFORE INSTALLATION

STEP1
Remove your LED Strip and all components from the box.

NOTE: If desired, you can operate the product without pairing to WI-A and without the app. Advanced features like color customization. scheduling, and voice control will not be available.
STEP 2
Download the IS  app from the Apo Store (for iPhone) or Gcogle Play Store (for Android phones).

STEP 3
Make sure your phone or tablet is successfully connected to the 2.4GHz WI-Fl network that your Smart Light Strip will be placed on and ensure that your Bluetooth is enabled. Open the NI app and create an account by following the on-screen Instructions.
** Monster Smart devices only work on a 2.4GHz WI-Network Many newer home networks are mixed networks that are set to 5GH7 patriarchy lt (ex: AT&T. Vpn7r-rn) and yr”( I may nail to i ice AP pairing modetoccnrectlf you still have difficulty, contact your Internet Seize Roster far assistance with 2.4C3Hz network setup.
STEP 4
It Is recommended to first pair your LED Strip In a location close to your router BEFORE installation. Connect each end of the LED light strip to the plug on the controller. be sure to align the tab on both sides of the plug. Connect the other end of the controller to the included power adapter. Once connected. plug the power adapter into a powered wall outlet and double press the controller button to turn on the light.
Press and hold the controller button for 5-6 seconds to enter pairing mode. The light will begin blinking when it has entered pairing mode and is ready to pair.
STEP 5
Confirm that the device is In pairing mode. LED is RAPIDLY blinking.
In the am app, select the “+” in the upper right corner of the home screen to add a new device. The app will detect the nearby Wr-Fi+BLE enabled device and ask if you would like to add it, click “Go to add”. Ensure that the device is checked and then click the “+” button.
STEP 6**
Confirm that the network displayed is your 2.4GHz WI-Fl network. then enter your Wi-A password and click “Confirm”. Once complete. your device will be connected to the network. Confirm or change the settings for your device and then click “Done” Your LED Strip is now setup and ready to use! You can now use the app to add voice control (see pg 8). adjust settings, create custom lighting effects, set schedules. and more!

INSTALLATION

STEP -1
Determine where you will Install the LED Strip. Make sure the location Is close enough to a power source. Ensure that the mounting surface is smooth and clean. Clean the mounting surface with a clean cloth and rubbing alcohol to remove any dust or oils that will weaken the adhesive. Be sure to let this surface dry before installation.
NOTE: ‘Nsadhesive b not recommended for use on unpainted brick raw ‘proud. uneven/bumpy surfaces. a wallpaper
STEP 2
Peel off the beginning of the adhesive backing and firmly suck the LED Strip onto the surface. Peel off more of the adhesive backing as you mount the LED Strip. pressing on each section of the strip for 10 seconds as you place it.
TIP: For test mounting results. place adhesive onto the desired surface with ONE attempt. Reapplying multiple times wilt not guarantee secure mounting onto the surface.
OPTIONAL
Using the included mounting clips and screws. and a Philips head screwdriver (not included). Install the mounting clips over the LED Strip in equal intervals. TIP: If desired you can cut the isn’t strip to shorter lengths by cutting on the line specified above.
Note: You carrot connect additional light strips to this product
STEP 3
Plug the power adapter Into a powered wall outlet and double press the controller button to turn on the light. The LED Strip wilt automatically reconnect to the paired Wi-Fi network and will now be ready to use!

HOW TO USE

Your LED Light Strip can be easily controlled by the controller. using the app to access advanced and customizable lighting effects, or by using a compatible voice assistant product for hands-free operation. (see page 8)

BUTTON CONTROL APP CONTROL: EDIT SCENES
The app gives you full control over all the functions of the LED Strip. as well as the ability to edit preset scenes to create your own custom scenes. Below are some of the editable scene features for LED Strip:

TROUBLESHOOTING

HAVING TROUBLE WITH SETUP?
Don’t return this product to the retailer, we’re here to help. Please call/write us for customer support: 866-246-2008 customerservice@monsterilluminessence.com
Q: Why is my device failing to connect to my Wi-Fi network?
Al: Make sure your phone or tablet is successfully connected to the 2.4GHz Wi- Fi network that your device will be placed on.
A2: Make sure you enable Bluetooth and allow location services on your phone or tablet to find nearby devices.
A3: If your Wi-Fi network is a mixed 2.4GHz/5GHz network, try using AP pairing mode for better results.

1. Press and hold the pairing button until the LED is slowly blinking.
2. In the app, select the “+” in the upper right corner of the home screen to add a new device and then select “Lighting (Wi-Fi)”.
3. Click “Net Pairing Mode” in the upper right to switch to AP mode.
4. Confirm that the LED indicator is slowly blinking, confirm the network is your mixed Wi-Fi network, enter your Wi-Fi password, and click “Confirm”.
5. Follow on-screen instructions to set up your device via wireless access point

A4: If you still have issues with your mixed network, you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.
Q: Can I cut this LED Light Strip?
Al: Yes. If desired, you can cut the light strip to shorter lengths by cutting on the line inbetween the GRBW marks (see pg 5). However, once cut, the strip will no longer be water resistant or covered under warranty.
Q: Can I attach additional LED Light Strips to this one?
Al: This strip is not designed with an expansion plug, but you can easily group multiple strips together in the app in order to control them all as one. Click on the menu button in the upper right corner and then click “Create Group” to group your devices.
For other frequently asked questions please visit our _ website at www.monsterilluminessence.com /

VOICE CONTROL OPTIONAL

AMAZON VOICE CONTROL SETUP
Make sure your Amazon Alexa device is installed and setup
STEP 1 : Open the Alexa app and go to Skills in the menu
STEP 2 : Search for and choose
STEP 3 : Enable the Skill and authorize your account using your login information
NOTE : Use the same login information that you used to create your Monster Smart account

At any time, go to the Alexa app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.
Using the name RGBW LED Strip, or the name you assigned your device, you can ask Alexa to control your device, just say “Alexa,” and ask: “Turn on my LED Strip”, “Set my LED Strip to blue”, “Set my LED Strip to 50% brightness”, and more!

GOOGLE VOICE CONTROL SETUP
Make sure your Google Assistant device is installed and setup.
STEP 1 : Open the Google Home app, go to the Home menu, and tap the “+” button
STEP 2 : Click “Set up device”
STEP 3 : Click “Have something already set up?”
STEP 4 : Search for and choose am and authorize your account using your login information
NOTE : Use the same login information that you used to create your Monster Smart account

At any time, go to the Google Home app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.
Using the name RGBW LED Strip, or the name you assigned your device, you can ask your Google Assistant to control your device, just say “Hey Google” and say: “Turn on my LED Strip”, “Set my LED Strip to blue”, “Set my LED Strip to 50% brightness”, and more!

SIRI VOICE CONTROL SETUP
Requires iPhone running iOS 12 or later.
STEP 1 : Open the In MONSTER’ SMRRT app and go to the “Smart” menu, tap the “+” button to create a new Tap To Run Smart Scene
STEP 2 : Tap “launch Tap To Run” and fill out the information
STEP 3 :  Once your Smart Scene is created and saved, click the button that appears at the bottom of the screen that says “Add to Siri” to open the list of options
STEP 4 :  Select your new Tap To Run Smart Scene from the list and click “Add to Siri”
STEP 5 : Create a custom phrase to say to Siri to run your Smart Scene (this can be any verbal command)

Now Siri can use your voice and custom verbal command to turn your RGBW LED Strip on or off, activate your favorite lighting pattern, adjust the device at the same time as your other smart devices, or whatever you’ve set up as your Tap To Run Smart Scene.
NOTES
WARRANTY 1 Year Limited Warranty – Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

SAFETY

• Keep these instructions

• Uncoil the light strip before use
• Do not drop, puncture, or disassemble this product Do not install this product in any way other than what is outlined in this guide
• Do not submerge the strip or the power supply unit in water Avoid long exposure to direct sunlight, which may cause damage
• Do not use this product in small, enclosed locations that could limit the flow of air or trap excess heat
• Do not expose this product to open flames or use near fire
• Do not use the product in a strong magnetic field
• Do not use this product for emergency lighting/exits
• Do not allow small children to operate, modify, or install this device unsupervised
• Use a clean, soft cloth to clean – do not use any corrosive cleaners/oils to clean
• The external flexible cable or cord of this luminaries cannot be replaced: if the cord is damaged, the luminaries shall be destroyed
• The light source contained in this luminaries shall only be replaced by the manufacturer or his service agent or a similar qualified pea 

WIFI LED LIGHT STRIP I Model: MLB7-2059-RGB I Input:12V 2A **
The illustrated products and specifications may differ slightly from those supplied. The M Monster logo and Illumine Essence are trademarks or registered trademarks of Monster, Inc. or its subsidiaries in the U.S and other countries and are used under license. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App store is a service mark of Apple Inc. Google, Android and Google Play are trademarks of Google LLC. Pre-set-up required. Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks. Censused and Manufactured by Jem Accessories, Inc. Edison, NJ 08817. Made In China
FCC Compliance**
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RE Exposure Statement
To satisfy FCC’s RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.
ISEDC Warning
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.
1 YEAR LIMITED WARRANTY
Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020 This limited warranty contains important information about your rights and obligations, as well as limitations and excursions that may apply to you.

1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Jem Accessories, Inc. (“Jem Accessories”), 32 Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the endorsed Monster Smart-branded product contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one year. Notwithstanding the foregoing, the Warranty Period for a factory refurbished Product is one (1) year, even if installed by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation. Repair or replacement may be made with a new or refurbished product or components, at Jem Accessories’s sole discretion. If the Product or a component incorporated within it is no longer available, Jem Accessories may, at Jem Accessories’s sole discretion, replace the Product with a similar product of similar function. This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety (90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. This Limited Warranty is not transferable from the original purchaser to subsequent owners.
2. TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy.
3. WARRANTY CONDITIONS; HOWTO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.com/support during the Warranty Period to provide notice of your warranty dam and describe the alleged failure, and (b) comply with Jem Accessories (or its authorized distributor’s) return shipping instructions. Jem Accessories will have no warranty obligations with respect to a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below).
4. WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Ineligible Products”): (i) Products marked as”sample”or”Not for Sale”, or sold”AS IS”; (ii) Products that have been subject to: (a) modifications, alterations, tampering, or improper maintenance or repairs; (b) handling, storage, installation, testing, or use not in accordance with any quick start guide, manual or other instructions provided beam Accessories; (c) abuse or misuse of the Product; (d) breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; or (e) Acts of God, inducing but not limited to lightning, flood, tornado, earthquake, or hurricane; or (iii) any non-Jem Accessories branded hardware products, even if packaged or sold with Jem Accessories hardware. This Limited Warranty does not cover consumable parts, including batteries, unless damage is due to defects in materials or workmanship of the Product, or software (even if packaged or sold with the product). Jem Accessories recommends that you use only authorized service providers for maintenance or repair. Unauthorized use of the Product or software can impair the Product’s performance and may invalidate this Limited Warranty.
5. DISCLAIMER OF WARRANTIES Except as stated above in this limited warranty, and to the maximum extent permitted by applicable law, Jem Accessories disclaims all express, implied, and statutory warranties and conditions with respect to the product, including the implied warranties of merchantability and fitness for a particular purpose. To the maximum extent permitted by applicable law, Jem Accessories also limits the duration of any applicable implied warranties or conditions to the duration of this limited warranty.
6. LIMITATION OF DAMAGES In addition to the above warranty disclaimers, in no event will Jem Accessories be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product, and Jem Accessories’s total cumulative liability arising from or related to this limited warranty or the product will not exceed the amount actually paid for the product by the original purchaser.
7. LIMITATION OF LIABILITY The Jem Accessories online services at monsterilluminessence.com (“services”) provide you information (“product information”) regarding your Jem Accessories products or other peripherals connected to your products (“product peripherals”). The type of product peripherals that may be connected to your product may change from time to time. Without limiting the generality of the disclaimers above, all product information is provided for your convenience,”as is’; and “as available’: Jem Accessories does not represent, warrant, or guarantee that product information will be available, accurate, or reliable or that product information or use of the services or product will provide safety in your home. You use all product information, the services, and the product at your own discretion and risk. You will be solely responsible for (and Jem Accessories disclaims) any and all loss, liability, or damages, including to your wiring, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home, resulting from your use of the product information, services, or product. Product information provided by the services is not intended as a substitute for direct means of obtaining the information. For example, a notification provided through the service is not intended as a substitute for audible and visible indications in the home and on the product, nor for a third party monitoring service that monitors alarm state.
8. YOUR RIGHTS ANDTHIS LIMITED WARRANTY This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. Likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces or jurisdictions. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service. If you need to start a warranty claim for your Monster Smart device, please reach out to Customer Support by emailing customerservice@monsterilluminessence.com or calling our support number 866-246-2008. Please allow 7-10 business days to process warranty claims. Customers located outside of U.S. will be responsible for all shipping costs.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>