MICHELIN EX1-02 Active Antenna User Manual
- June 11, 2024
- MICHELIN
Table of Contents
MICHELIN EX1-02 Active Antenna
Product Information
The MEMS EVOLUTION 4 ACTIVE ANTENNA is an electronic device that receives pressure and temperature data transmitted by the MEMS SENSORS via antennas. This information is then forwarded to the MEMS EVOLUTION TRANSCEIVER, along with corrective action messages to maximize the tire’s service life. The product must be recycled at the end of its life and cannot be disposed of in a landfill.
Product Specifications
- Performance Characteristics: Subject to change without notification. Document version 1.7
- Electrical Performance: N/A
- Operating Conditions: N/A
- Storage Conditions: N/A
- Physical Characteristics: Width=130mm
- Environment: N/A
- RCM COMPLIANCE: N/A
FCC Certification
- Model: AA-V3.2
- FCC ID: FI5-EX1-02
- To ensure proper functioning, please follow these instructions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please note that changes or modifications not expressly approved by Michelin may void the user’s authority to operate the equipment.
Product Usage Instructions
For installation and security information, please refer to the MEMS 4 Hardware Installation & Maintenance Guide. In order to dispose of the MEMS EVOLUTION ACTIVE ANTENNA at the end of its life, it must be removed from the vehicle and deposited in a container dedicated to the recycling of electronic equipment. If you do not have access to the appropriate recycling facility, please contact your local Michelin MEMS representative for assistance. For more information or assistance, please contact the Michelin MEMS representative for your country using the contact details provided:
- +55 (21) 36 21 4646
- +1 864 458 5000
- +61 3 86 71 1003
- +27 115 790 300
PRODUCT NAME
MEMS EVOLUTION ACTIVE ANTENNA – Part Number CAI 960299
PRODUCT DESCRIPTION
The MEMS EVOLUTION ACTIVE ANTENNA receives, via antennas, pressure and temperature data transmitted by the MEMS SENSORS. This information is to be forwarded to the MEMS EVOLUTION TRANSCEIVER, together with any messages that may require corrective action to be taken in order to maximise the service life of the tire.
PRODUCT INSTALLATION & SECURITY
please refer to the MEMS 4 Hardware Installation & Maintenance Guide
FCC
- Model : AA-V3.2
- FCC ID : FI5-EX1-02
FCC Warning:
- Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by Michelin may void the user’s authority to operate the equipment.
SPECIFICATION
-
Performance Characteristics
RX frequency: 433.92MHz ISM band -
Electrical Performance
- Supply voltage: 12VDC
- In less than 10mA under 12V
-
Operating Conditions
- Operating temperature: -40°C to +70°C, -40°F to +158°F
- Sealing: IP66
-
Storage Conditions
Storage temperature: -50°C to +80°C, -58°F to +176°F -
Physical Characteristics
- Approximate dimensions: Height= 85mm. Length=130mm. Width=130mm
- Approximate weight: approximately 355g
- Available connections: CAN Bus
-
Environment
RoHS compliant
DISPOSAL
- The MEMS EVOLUTION 4 ACTIVE ANTENNA must not be disposed of in landfill.
- At the end of its life, the MEMS EVOLUTION ACTIVE ANTENNA must be removed from the vehicle and deposited in a container dedicated to the recycling of electronic equipment. If users do not have access to the appropriate recycling facility, your local Michelin MEMS representative is able to provide a container dedicated to the purpose of collecting MEMS equipment.
CONTACT DETAILS
- For more information or assistance, please contact the Michelin MEMS representative for your country.
- Brasil, Chile & Perú : +55 (21) 36 21 4646
- USA, Canada & México : +1 864 458 5000
- Australia : +61 3 86 71 1003
- South Africa : +27 115 790 300
- Features, specifications are subject to change without notification.
Document version 1.7
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>