CODi CLARO A04619 Bluetooth plus Wireless Stereo Headset with ENC Microphone User Manual
- June 11, 2024
- CODi
Table of Contents
- Product Overview
- In the Box
- Basic Operation
- LED Indicator
- Voice lndicators
- Bluetooth Pairing & Connection
- Wireless USB-A Dongle Pairing & Connection
- Connection with Two devices
- With 3.5mm audio cable
- Charging
- Product Specifications
- FAQs
- Copyright
- Compatibility
- Warranty Information
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CLARO
A04619 Bluetooth plus Wireless Stereo Headset with ENC Microphone
User Manual +1 800.263.4462
custsupport@codiworldwide.com
Product Overview
1. Mute button
2. Multi-Function button (MFB)
3. Volume +
4. Volume
5. LED indicator| 6. ON/OFF switch
7. USB-C charging port
8. 3.5mm audio jack
9. Wireless dongle
10. Charging base
---|---
In the Box
(1) Bluetooth headset
(1) Charging base
(1) Wireless dongle, RF IIRC
(1) USB-C charging cable
(1) 3.5mm Audio cable
(1) User manual
Basic Operation
| Button | Function | Operation Instruction |
|---|---|---|
| Switch | Power On | In OFF status, toggle the switch to the up side to power on. |
A04619 will enter paring mode automatically, with prompt “Power ON”.
Power Off| In ON status, toggle the switch to the down side to power off, with
prompt “Power OFF”.
MFB| Play / Pause| Short press when playing music.
Redial a call| In connected/standby/playing music status, double press MFB to
dial the last call
Voice assistant| Long press MFB for 1-2 seconds then release.
Audio Switch| During a call, long press for 1-2 seconds to switch between
Bluetooth headset and cell phone speaker/microphone.
Answer a call| When a call comes in, short press to answer.
Hang up a call| During a call, short press to hang up.
Reject a call| When a call comes, long press for 1 second to reject the call.
Volume +| Volume Up| Short press. (up the maximum, it will prompted”.
Next Song| Long press for 1 second.
Volume –| Volume Down| Short press
Previous Song| Long press for 1 second.
Mute Button| Mute/unmute| During a call, short press to mute, press again to
cancel.
MFB and Volume-| Delete pairing records| In power-on status, long press MFB
and Volume – simultaneously for 5 about seconds to delete records. This will
reset all connections (including the USB-A dongle)
*Features are only available when the headset is connected to a mobile phone
LED Indicator
| Mode | LED Indicator |
|---|---|
| Power on | Blue LED flashes 2 times |
| Power off | Red LED flashes 2 times |
| Pairing mode | Red & Blue LED flash alternately |
| Connected standby mode | Blue LED flashes once every 10 seconds |
| Playing Music | Blue LED flashes once every 10 seconds |
| Talking | Blue LED flashes once every 10 seconds |
| Delete pairing record | Red & Blue LED are on for 1 second at the same time |
| Charging | Solid Red LED |
| Full charged | Solid Blue LED |
| Low battery | Red LED flashes |
Voice lndicators
| Power on | “Power on” |
|---|---|
| Enter paring mode | “Pairing” |
| Pair successfully | “Paired” |
| Connect successfully | “Your headset is connected” |
| Disconnect | “Your headset is disconnected” |
| Power off | “Power off” |
| Microphone mute on | “Mute on” |
| Microphone mute off | “Mute off” |
| Low battery | “Battery low” |
Bluetooth Pairing & Connection
In OFF status, toggle the ON/OFF switch up to power on. “CODi A04619” will
automatically enter pairing mode and the LED indicator light will begin to
flash red and blue. The headset will prompt “Power ON” and then prompt
“Pairing” once it is ready to be paired.
Search and click “CODi A04619” in the Bluetooth list on your device. The
headset will prompt “Paired” and then prompt “Your headset is connected” when
successfully paired. The LED indicator light will change to blue and then
disappear.
Wireless USB-A Dongle Pairing & Connection
Before pairing the A04619 via Wireless USB-A dongle, disable the Bluetooth function on any previously paired device(s).
-
Activate the USB-A dongle by plugging it into a USB-A port on your host device. This will turn the dongle on automatically.
-
Once plugged in, the indicator light on the dongle will flash blue indicating that the dongle is in Pairing Mode.
-
On the headset, toggle the power switch to ON; the headset will automatically enter Pairing Mode.
-
Keep the headset near the dongle for 5-10 seconds and the headset will pair automatically to the dongle and is ready for use. Once successfully paired/con-nected, the indicator light on the dongle will stay a solid blue and the headset’s indicator light will flash blue.
Connection with Two devices
When there are two device connected to this headset, they are divided into two
categories: Device A and Device B. To connect to two devices, perform the
following actions:
In OFF status, toggle the ON/OFF switch up to power on your headset and enter
pairing mode. The LED indicator light will flash between red and blue.
Turn on the Bluetooth of Device A and search for “CODi A04619” and click
connect. Be sure Device A is connected successfully and then turn off the
Bluetooth of Device A to disconnect from the headset and the headset will then
re-enter pairing mode.
Use Device B to connect to the headset via Bluetooth the same way as with
Device A. Be sure that Device B is connected successfully and then turn on
Bluetooth for Device A one again and reconnect Device A to “CODi A04619″‘s
Bluetooth.
Note: When the headset is connected to two devices, music can only be
played through one device at a time. If you want to play music from the other
device, you need to pause the music on the current device you are using. The
same operation applies when using the headset to make audio calls.
With 3.5mm audio cable
Insert one end of 3.5mm audio cable into the audio jack of device and insert
the other end into the audio jack of the headset.
Please note: When used as a wired earphone, this headset can only be used
for listening to music. The call function cannot be performed and the MFB does
not function.
Charging
Charge the A04619 when the Red LED flashes indicating a low battery.
Charging time is about 2 hours. While charging, the LED will maintain a solid
red. When it is fully charged, the solid red LED will turn off and a blue LED
will turn on
Two ways of Charging
Method 1: Charge the A04619 through the charging base. It is required
that the base must be plugged into an outlet or host device to facilitate
charging.
Method 2: Charge the A04619 directly through the USB-C charging cable by
connecting the cable to the headset’s charging port.
Product Specifications
| Bluetooth Version | Bluetooth V5.1 |
|---|---|
| Operation Range | 33ft |
| Bluetooth Protocols | HSP, HFP, AVRCP, A2DP |
| CODEC | AAC, SBC, APTX, APTX HD |
| Charging Time | About 2 hours |
| Calling Time | About 30 hours (70% volume) |
| Music Time | About 35 hours (70% volume) |
| Battery | 3.7V 600mAh |
| Work Temperature | 14°F-131°F (-10-55°C) |
| Headset Net Weight | -0.491bs (-222.3g) |
| Headset Dimension | 7.41 x 7.14 x 2.83in (188.4 x 181.4 x 71.9mm) |
| Charging Base Dimension | 4.06 x 3.44 x 4.19in (103.2 x 87.4 x 106.5mm) |
| Charging Base Net Weight | -0.38Ibs (-174g) |
*The data above may vary depending on headset usage.
FAQs
Q1: “How do I reconnect my headset?”****
– Al: Once the A04619 has been successfully connected initially the headset will automatically pair with your host device when powered on. If the headset fails to reconnect, disconnect and pair again.
Q2: “How do I delete a paired record?”****
– A2: While the headset is powered ON, long press the MFB and the Volume – button simultaneously for 5 seconds to clear the pairing record. After deleting the pairing record, A04619 will no longer connect automatically when it is powered on to that device and will need to be re-paired to any devices manually.
Q3: “What is the password to use while pairing?”****
– A3: Some connection devices require a password for pairing. When pairing with this type of device try the following passwords: 0000, 8888, 1111, or 1234. If none of these work, please reach out to custsupport@codiworldwide.com.
Q4: “What do I do if there’s a connection issue?”****
– A4: If you encounter a connection issue, try performing a charging reset. To do this, use the charging cable to charge the headset, the headset will power OFF. Once off, unplug the cable and turn ON the headset to connect to your devices. You can also try to remove the pairing records and connect again manually. If all methods fail, please reach out to custsupport@codiworldwide.com
Q5: “Does this headset power off automatically?”****
– A5: Yes, this headset will power OFF automatically if there is no connection for over 10 minutes or if the battery voltage is less than 3.1V.
Q6: “What do I do if the Bluetooth dongle won’t turn on after plugging it into a USB-A port?”****
– A6: Try plugging the dongle into a different USB-A port.
Q7: “The Bluetooth dongle does not pair automatically with the A04619.”****
– A7: Make sure that the Bluetooth dongle is in pairing mode (the indicator light will be flashing blue) and the A04619 is in auto re-pairing mode. Also make sure that you plug the USB-A dongle in prior to turning on the A04619 headset.
Copyright
No part of this publication may be reproduced in any form by any means without prior written permission. Regardless of any direct acknowledgment elsewhere in the body of this document, CODi hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Compatibility
PC, Laptop, Smartphone, and other Bluetooth-enabled/USB-A devices
Warranty Information
CODi offers a non-transferable, 1 Year Limited Warranty, from date of
purchase, to the original purchaser, who has properly registered the Product
through
www.codiworldwide.com/productregistration.
CODi warrants that all products will be free from defects in workmanship and
materials under normal use, for 12 months, unless otherwise specified in a
Product Specification Sheet (“Limited Warranty”).
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna:
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experience radio/TV technician for help
Changes or modifications not authorized by the party responsible for
compliance could void the user’s authority to operate this product.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Hereby, CODi Acquisition LLC declares that the radio equipment type A04619 is
in compli-ance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.CODiWorldwide.com
The state of California requires the following statement:
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>