Scosche 142PB10PD GoBat 10K Portable Power Bank 10,000 mAh User Manual
- June 11, 2024
- Scosche
Table of Contents
Scosche 142PB10PD GoBat 10K Portable Power Bank 10,000 mAh User Manual
DEVICE SET UP
Overview
Go Bat Power Bank
- USB-A Output Charge Port
- Charge Level Button. Press to display charge level LEDs.
- Charge Level LEDs· 4 LEDs lluminate in sequence to show charge level
- Fast Charge Indicator: Illuminates when fast charge is enabled (input/output)
- USB-C Power Delivery Input / Output Charge Port.
Charging GoBat
Charging GoBat (USB-C port only)
A. Use the included cable to connect GoBat to a USB-C charger or power
source (not included).
B. For optimal performance, fully charge power bank to 100% before use.
Charging Device with GoBat
Charging Device with GoBat (USB-C or USB-A port)
A. Use the included USB-C cable, or device’s charge cable, to connect
GoBat to device.
B. Use a USB-A cable (not included) to connect GoBat to device.
SPECIFICATIONS
- Battery Capacity 10,000 mAh
- USB-C PD Input: SV 3A / 9V 2.2A / 12V 1.67 A (20W)
- USB CPD Output: SV 3A I 9V 2.2A / 12V 1.67 A (20W)
- USB-A Output· SV 3A I 9V 2A / 12V 1.SA (18W)
- USB-C + USB-A Output: SV 3A Max.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there 1s no guarantee that interference will not occur 1n a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver
-
Connect the equipment into an outlet on a mcuit different from that to which
the receiver is connected -
Consult the dealer or an experienced radio/N technician for help.
Canadian Compliance Statement
This device contains license-exempt transmitter(s)/rece1ver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) Operation is subject to the following two conditions (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class [Bl digital apparatus complies with Canadian ICES-003 CAN ICES-3 (B)/NMB-3(8)
GoBat 10K How-To Video
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Phone. 800-363-4490 x1 I
805-486-4450 x1
www.scosche.com
©2022 Scosche ,ndustries
Designed in Oxnard, California
SI PB1 OPD 4/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>