HYTRONIK HBP02 Touch Panel with Bluetooth Instruction Manual
- June 11, 2024
- HYTRONIK
Table of Contents
HYTRONIK HBP02 Touch Panel with Bluetooth Instruction Manual
Technical Specifications
- Operation frequency: 2.4 GHz – 2.483 GHz
- Transmission power: 4 dBm
- Range (Typical indoor): 10~30m
- Protocol: Bluthoth 5.0 SIG Mesh
- Operating voltage: 220~240VAC 50/60Hz
- Stand-by power: <1.5W
- Operation temperature: Ta: -20OC ~ +50OC
- Relative humidity: 20% ~ 90%
- IP rating: IP20
- EMC standard (EMC): EN55015, EN61000, EN61547
- Safety standard (LVD): EN60669-1/-2-1 AS/NZS60669-1/-2-1
- RED: EN300328, EN301489-1/-17
- Certification: UKCA, CB, CE , EMC, RED, RCM
Installation
Mechanical Structure & Dimensions
Wiring Diagram
**Wire Preparation
Rising clamp terminal**
To make or release the wire from the terminal, use a screwdriver to push down the button.
Download the App
IP rating IP20 Free App for set-up and commissioning
Bluthooth 5.0 SIG mesh
Smartphone app for both iOS & Android platform
for iOS
for Android
Koolmesh Pro app for iPad
for iPad
Web app/platform
for Web
www.iot.koolmesh.com
Operation
Brightness
Control
Tunable White
Control
1 2 3 4 Scene Recall
Scenes are simply programmed using the App.
Create and name the scenes using the scenes menu, and then assign the scenes
to buttons 1 2 3 4 from the device settings menu.
Senser take over
Press this button to quit manual override mode(Sensors will take over the
control).
Clean Mode
Long press this button for more than 5s to go to clean mode (during this clean
mode, the touch panel screen will be locked and does not respond to any
touch), it will quit automatically after 1min.
The ON/OFF button has a configurable response via the App.
Permanent OFF (Occupancy sensor disabled).
Turning off via the ON/OFF button will suspend the entire system, including
occupancy sensor.
Pressing this button again will resume the last automatic profile selected, or
pressing any other button on the control panel will wake up the system.
Touch Indications
Three methods for successful touch indications:
Vibration / Beeper / LED indicator.
User can select any one, two or all of them to indicate successful touch on
HBP02 in the App.
Real-time Sustainability
The touch panel HBP02 can keep the time runing for up to 7-8 weeks against
power failure.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download->knowledge-> Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetoothtechnology->Bluetooth Accessories
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>