Marshall PEDL-00100 Bluesbreaker Pedal User Guide
- June 11, 2024
- Marshall
Table of Contents
BLUESBREAKER
RE-ISSUE PEDAL
User Guide
PEDL-00100 Blues breaker Pedal
CONGRATULATIONS ON PURCHASING YOUR MARSHALL BLUESBREAKER PEDAL
The sound of the 1962 ‘Blues breaker’ amplifier began a legend, with the
smooth tone, rich warmth and full character that gave guitarists more
expression than ever before. The original Blues breaker pedal took this and
put it in a stomp box, while this 60th anniversary reissue accurately delivers
all that once again, plus even more for the modern guitarist.
Your Blues breaker pedal captures the magic of those classic vintage amps and
will add sweetness and crispness to your guitar sound, but with extra edge to
carry solos and squeeze out those vital harmonics.
These pedals have been seen on countless stages since first being introduced
in 1992. That iconic look has been accurately recreated so it’s equally
recognisable for today and the future.
We hope you enjoy your new pedal as much as we have enjoyed designing and
building it for you.
- The Marshall Team
GETTING STARTED
This device requires power from either a 9V battery or a 9V DC power adaptor:
- To fit a battery, remove the compartment cover on the underside of the pedal. Insert the battery, connect it to the terminals and replace the compartment cover. Remove the battery from the pedal when not in use.
- When selecting a power adaptor for your pedal, ensure it is compatible with both the pedal and your mains supply. Your Marshall dealer can help you with this.
Warning: unsuitable power adaptors may produce unwanted noise or damage your pedal.
SPECIFICATIONS
| Model no. | PEDL-00100 |
|---|---|
| Description | Drive pedal |
| Inputs/Outputs | 1 x 1/4” jack input, 1 x 1/4” jack output |
| Controls | Gain, Tone and Volume |
| Power | 9VDC regulated, centre negative, 5.5mm x 2.1mm or |
Standard 9V battery (PP3)
Current drawn (at 9VDC)| 5mA
Input impedance| 1MΩ
Output impedance| 25kΩ
Dimensions
Width| 110mm
Length| 147mm
Height| 67mm
Weight (without battery)| 0.7kg
CONTROLS
The pedal is active when the LED above the footswitch is illuminated. Press
the footswitch again to deactivate the pedal.
Gain: Sets the pre-distortion level.
Tone: Use this control to sculpt your sound, such as boosting the low-end
or accentuating the high frequencies.
Volume: Controls the output level of the pedal (post-distortion).
WARRANTY
For warranty information and to register your product please visit:
marshall.com/register-your-marshallamp
Whilst the information contained herein is correct at the time of publication,
due to its policy of constant improvement and development, Marshall
Amplification Plc reserves the right to alter specifications without prior
notice.
MARSHALL AMPLIFICATION PLC,
DENBIGH ROAD,
BLETCHLEY, MILTON KEYNES,
MK1 1DQ, ENGLAND.
T: +44 (0) 1908 375411
MARSHALL AMPLIFICATION PLC
REGISTERED IN ENGLAND
REGISTERED NUMBER: 805676
M3311.449
CATS-00264-02-v05
Marshall.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>