ring Stick Up Cam Plug-Indoor Camera User Manual
- June 11, 2024
- Ring
Table of Contents
ring Stick Up Cam Plug-Indoor Camera
Set up your Stick Up Cam
Download the Ring app
The Ring app walks you through setting up and managing your Stick Up Cam.
Search for “Ring” in one of the app stores below, or visit:
ring.com/app
Power it up!
First, plug the included power cable into the back of your Stick Up Cam. Then
plug the power adapter into an outlet.
Installing outdoors?
Remove the indoor plug faceplate by pressing the “PUSH” button and sliding it
off of the adapter. Then grab the included outdoor power cable, and slide it’s
connector onto the power adapter until it clicks into place.
- If you plan to install Stick Up Cam outdoors, secure the power adapter to a wall or floor with the included screws.
Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam. Write it down below so it’s handy
when you need it:
Set up your Stick Up Cam in the Ring app.
In the Ring app, select Set Up a Device. When prompted, select Security Cams
and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from
your Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s
updating its software. Do not unplug your Stick Up Cam while the light is
flashing!
Install your Stick Up Cam
Choose a location
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to
sit on a flat surface like a table or shelf, but can also be mounted to a
wall. Choose a spot where it can provide the view you want, within reach of a
power outlet.
Wanna mount to a ceiling?
Mount to a ceiling with the Ring Stick Up Cam Mount (sold separately).
How to use Stick Up Cam on a table or shelf:
- Place it at your chosen location, then plug it in. Your Stick Up Cam is now ready to protect you.
- Once you’re done, check out the live video in the Ring app to make sure you have the view you want.
If you’d like a downward camera angle…
Swivel the base around so that the long side faces the front, then tilt your
Stick Up Cam so it points downward.
Install the security screws (optional).
Your Stick Up Cam comes with two optional security screw locations. One
secures the battery compartment, and the other secures the mounting bracket to
the base. To use them, open the battery compartment and/or remove the mounting
bracket, then pop out the rubber plug(s).
-
-
Swivel the base so the long side faces the front.
-
Insert and drive the security screw into the base screw location with a standard Phillips-head screwdriver (not included).
-
Turn your Stick Up Cam over to access the battery compartment screw hole, and drive the second security screw.
How to install Stick Up Cam on a wall
Remove the base.
Unscrew it using a standard Phillips-head screwdriver (not included).
Re-attach the base
Screw it into the back of your Stick Up Cam with the “UP” arrow on the bracket
pointing upward.
Remove the mounting bracket
Slide it down to remove it from the base.
Drive the screws
Hold the bracket against your wall, making sure the “UP” arrow is pointing
upward, and mount it with the included screws.
Mount your Cam
Guide the grooves in the base onto the hooks on the bracket. Slide Stick Up
Cam down to secure it to the wall.
Check it out!
Now plug your Stick Up Cam back in, and rotate it to your desired angle. Check
outthe live video in the Ring app to make sure you have the view you want.
Install the security screws (optional)
Your Stick Up Cam comes with two optional security screw locations. One
secures the mounting bracket to the base, and the other secures the battery
compartment. To access them after you’ve mounted your Stick Up Cam, rotate it
to either side.
To install the base screw…
First, slide your Stick Up Cam off of the mounting bracket. Pop the rubber
plug out of the base, then place Stick Up Cam back on the bracket. Secure with
one of the provided screws.
To install the battery compartment screw…
Remove the battery compartment, pop out the rubber plug, then replace the
battery compartment on your Stick Up Cam. Secure with one of the provided
screws.
For additional help, visit: ring.com/help
- Or give us a call…
- US 1 800 656 1918
- Canada 1 855 300 7289
- Worldwide +1 310 929 7085
- For a list of all our customer support numbers, visit: ring.com/callus
- To review your warranty coverage, please visit www.ring.com/warranty. © 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates.
Download PDF:Ring Stick Up Cam Plug-Indoor Camera User Manual