Ring Stick Up Cam Elite Instruction Manual
- June 2, 2024
- Ring
Table of Contents
Ring Stick Up Cam Elite
SET UP YOUR STICK-UP CAM ELITE
Download the Ring app.
The app walks you through setting up and managing your Stick-Up Cam Elite. Search for “Ring” in one of the app stores below, or visit: ring.com/app
GRAB YOUR WI-FI PASSWORD
You’ll need it to set up your Stick-Up Cam. Write it down below so it’s handy when you need it:
Your Wi-Fi password ………….
Let’s get your Stick-Up Cam ready
First, slide off the bottom cover.
Do not reattach this cover until setup is complete!
POWERING YOUR STICK-UP CAM
You can power Stick Up Cam in one of two ways: Plug it into a socket (with
USB), or power it with the included Ring PoE Adapter, which supplies Power
over Ethernet
If you’re installing Stick Up Cam indoors, you can use either power supply.
For outdoors, use the PoE Adapter.
TO POWER STICK UP CAM WITH USB (For indoor use only)
Feed the included USB cable through the hole in the bottom cover and plug it
into your Stick Up Cam.
Then, connect the cable to the included USB power supply, and plug the power
supply into a socket.
TO POWER STICK UP CAM WITH THE POE ADAPTER (For indoor or outdoor use)
Feed an Ethernet cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, hook it up with the included PoE Adapter, following this diagram.
Note: For outdoor use, install the PoE Adapter indoors, then run an
Ethernet cable outdoors to your Stick Up Cam.
SET UP YOUR STICK-UP CAM IN THE RING APP
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from your Stick-Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s
updating its software.
Do not unplug your Stick Up Cam while the light is flashing!
INSTALL YOUR STICK-UP CAM ELITE
Choose a location
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to
sit on a flat surface like a table or shelf, but can also be mounted to a wall
or ceiling.
Choose a spot where it can provide the view you want, within reach of a power
outlet or an Ethernet port with PoE.
HOW TO USE STICK UP CAM ON A TABLE OR SHELF
Make sure that any connected cables have been routed through the hole in the
bottom cover.
Then, slide the cover into place on your Stick Up Cam. Secure the cover with
the attached screw, using the star-shaped end of the screwdriver bit.
Finally, place Stick Up Cam in your chosen position. Your Stick Up Cam is now
ready to protect you.
HOW TO INSTALL STICK UP CAM ON A WALL
Remove the plastic cover and rubber pad from the base.
You’ll put the cover back on once you’ve mounted your Stick Up Cam.
Flip the base to the rear
The base of the stand is hinged. Before wall-mounting, flip the base down and behind your Stick Up Cam.
PUSH THE RUBBER PAD BACK INTO THE BASE.
The rubber pad should sit between your wall and the base of your Stick Up Cam.
DRIVE THE SCREWS
Hold the round part of the base against your wall, rubber-side down. Use the
integrated level to ensure it’s straight.
Then mount it with the included screws.
HOW TO INSTALL STICK-UP CAM ON A CEILING
Remove the plastic cover from the base
You’ll put the cover back on once you’ve mounted your Stick Up Cam.
Rotate the stand above the camera:
The whole stand can rotate on its axis. Before ceiling-mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam.
Drive the screws
Hold the round part of the base against your ceiling, rubber-side down. Then mount it with the included screws.
FINAL STEPS FOR WALL OR CEILING MOUNTING
Close it up
Make sure that any connected cables have been routed through the hole in the
bottom cover.
Then, slide the cover into place on your Stick Up Cam. Secure it with the
attached screw, using the star-shaped end of the screwdriver bit.
Snap the cover back onto the base
Then, secure it with the included security screw, using the star-shaped end of
the screwdriver bit.
Now your Stick Up Cam is installed and ready to protect you.
SUPPORT
- com/help
- +1 310 929 7085
- +61 1 300 205 983
- +44 1727 26 3045
For a list of all our customer support numbers, visit: ring.com/callus. To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents.
© 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 10/07/19
FAQs
Does ring stick up Cam elite have night vision?
The Ring Stick Up Cam Elite is a cutting-edge security camera that can be used both inside and outside of your home to increase security. The Ring Stick Up Cam Elite has a wide viewing angle, night vision, two-way audio, HD video recording, and 1080p full HD quality.
How long does the battery last on a stick up cam Ring?
Depending on usage, the battery should last six to twelve months and recharge in five to ten hours. Or, you may use your Ring Stick Up Cam Battery with solar power if you want to be as ecologically responsible as possible.
How far does Ring stick up camera detect motion?
Set the area that your Stick Up Cam will cover using the motion range slider. Motion can be detected by your Stick Up Cam up to 30 feet away.
Does rain affect ring stick up cam?
Doorbells from Ring and outdoor security cameras are water-resistant and made to survive snow and typical rainfall. Ring items should not be immersed in water or sprayed with high pressure water because they are not waterproof.
Can I talk through ring stick up cam?
A wireless security camera with two-way audio is offered by the Ring Stick Up Cam. You may observe and communicate with people who are approaching your property from any direction using the Ring Stick Up Cam.
Does ring stick up cam work without subscription?
You can watch real-time footage from Ring security cameras and doorbells and respond to doorbell notifications without having to pay a monthly fee. You won’t receive video records of those occurrences if you don’t have a Ring Protect plan, though.
Can you turn Ring Cam stick on & off?
The Ring app can be used to turn it off.
What happens when Ring stick cam is unplugged?
There is no battery backup for this gadget. It is not connected or recording if the plug is removed. On the plus side, the camera ought to have recorded any motion before being unplugged, and that would be saved in the Ring cloud and accessible for viewing.
Does Ring Stick Up Cam have a siren?
It features 130-degree full HD video, motion detection, programmable motion zones, night vision, two-way audio, a built-in siren, and night vision.
Do Ring cameras only record when they sense motion?
When motion is detected by your device (including devices connected to cameras like an alarm system’s motion detector), the video doorbell button is pressed, or you start your device’s live video stream, Ring records and stores footage if you have a Ring Protect plan (including a free trial) (Live View).
Does Ring record everything or just motion?
Due to the device’s sophisticated motion detection features, Ring cameras are now only intended to record when they detect any motion. Additionally, Ring cameras come with technology that enables users to designate certain areas around their home that they want to be observed.
How far can Ring camera see at night?
The camera offers two-way conversation with noise cancellation, streams and records video in up to 1080p resolution, and has night vision capabilities up to 30 feet. A live stream of activity from each of your connected cameras is provided via the Ring app.
How do you hide an outdoor Ring camera?
You can conceal a camera by placing it behind a plant, a fake rock, a birdhouse or bird feeder, etc. Additionally, you can conceal it by painting it the same shade as your home.
Can you flip a Ring stick up cam upside down?
You may put the Ring upside-down and simply flip the image thanks to a feature in the Ring app that allows you to invert the image.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>