dahua VDA-LR10021EC Single Port Long Reach Ethernet Over Coaxial Extender User Manual
- June 11, 2024
- Dahua
Table of Contents
dahua VDA-LR10021EC Single Port Long Reach Ethernet Over Coaxial Extender
Important Safeguards and Warnings
Attention
Please read the following safeguards and warnings carefully before using the
product in order to avoid damages and losses.
- Do not expose the device to lampblack, steam, or dust. Otherwise, it may cause fire or electric shock.
- Do not install the device in a position exposed to sunlight or in high temperatures. Temperature rise in the device may cause a fire.
- Do not expose the device to a humid environment. Otherwise, it may cause a fire.
- The device must be installed on a solid and flat surface in order to guarantee safety under load and earthquake. Otherwise, it may cause the device to fall off or turn over.
- Do not place the device on a carpet or quilt.
- Do not block the air vent of the device or ventilation around the device. Otherwise, the temperature in device will rise and may cause a fire.
- Do not place any object on the device.
- Do not disassemble the device without professional instruction.
Warning
- Please use the battery properly to avoid fire, explosion, and other dangers.
- Please replace the used battery with a battery of the same type.
- Do not use a power line other than the one specified. Please use it properly. Otherwise, it may cause fire or electric shock.
Special Announcement
- This manual is for reference only.
- All the designs and software here are subject to change without prior written notice.
- All trademarks and registered trademarks are the properties of their respective owners.
- If there is any uncertainty or controversy, please refer to the final explanation of us.
- Please visit our website for more information.
- The function of the ITE being investigated to EN 62368-1 is considered not Ii kely to require connection to an Ethernet network with outside plant routing, including the campus environment.
- The installation instructions clearly state that the ITE is to be connected only to PoE networks without routing to the outside plant.
Product Overview
Product Introduction
Single-Port Long Reach Ethernet over Coaxial Extender is a type of converter
from RJ45 to BNC port, which supports long-range power supply transmission via
coaxial cable. It provides one BNC todXidl port dnd ur,e RJ45 μurt. The
product is equipped with two transmission modes which me 10011/lbs and 1 Mbps.
It can be modified according to the transmission distance.
Product Features
- Supports IEEE802.3 IEEE802.3u and IEEE802.3X standards.
- Supports IEEE802.3af and IEEE802.3at power supply standards.
- Port: 1*RJ45 10/lOOMbps, P-SNC.
- Supports RG59 coaxial cable: 400ml I OOMbps, I OOOmil OM bps.
- Supports MDI/MDIX self-adaption.
- Supports long-range power supply transmission via coaxial cable.
- Operating temperature: -30~65.
Typical Application
The product is divided into a transmitter (DH-LRl 002-1 ET) and receiver (DH- LRl 002-1 EC), which can be used together with EoC passive converter (LR I 002). The typical application is shown in Figure 1-1
Device Structure
Device Panel
The device panel Is shown In Figure 2-1 (DH-LR 1002-1 ET) and Figure 2-2 (DH-
LR 1002-1 EC).
Please refer to Table 2-1 for more details.
| SN | Name | Note |
|---|---|---|
| 1 | PoEOUT | PoE output port |
| 2 | PoE IN | PoE input port |
| 3 | Link | BNC port Link indicator light |
El00: On for 3 seconds, off for 1 second
El 0: On for l second, off for l second
4| PWR| Power indicator light
5| Long Reach| Coaxial cable port
Installation Guide
Device Installation
Single-Port Long Reach Ethernet over Coaxial Extender supports two
installation modes. It can be installed into the junction box or it can
support a DIN rail mount.
Please refer to Figure 3-1 for the installation inside the junction box.
Please refer to Figure 3-2 for the DIN rail mount.
Appendix 1 PoE Power Supply Specifications (RG59 Coaxial Cable)
Cable Length
(in)
| Communica1ion
Bandwidth (Mbps)
| PoE Max Load (,1p,Kity (W)| Network Operating
Moda
---|---|---|---
100| 100| 21| ElOO
200| 100| 15| E100
300| 100| 11| El0O
400| 100| 9| ElOO
500| 10| 7| E10
800| 10| 5| E10
1000| 10| 4| E10
ePoE switches supply voltage 48V.
RG-59, max. DC resistance< 50/lOOm.
Cautio n: The load capacity can be applied to networking scheme 3. Cable length means the total wire length from switch to transmitter (including network cable and coaxial cable), It can
use max. 2m network cable to connect the transmitter to IPC.
100| 100| 25.5| ElOO
200| 100| 24| ElOO
300| 100| 19| E100
400| 100| 16| ElOO
500| 10| 13| El0
800| 10| 8| E10
1000| 10| 6| E10
ePoE switches supply voltage 53V.
RG-59, max. DC resistance< 50/lOOm.
Cautio n: The load capacity can be applied to networking scheme 3. Cable length means the
total wire length from switch to transmitter (including network cable and coaxial cable), It can use max. 2m network cable to connect the transmitter to IPC.
Note
- This user’s manual is for reference only.
- A slight difference may be found in the user interface.
- All the designs and software here are subject to change without prior written notice.
- All trademarks and registered trademarks are the properties of their respective owners.
- If there is <1ny uncertainty or controversy, ple<1se refer to the final explanation of us.
- Please visit our website for more information.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199 Bin’an Road, Binjiang District, Hangzhou, P.R. China I Website: www.dahuasecurity.com I Postcode: 310053 Emal I: overseas@dahuatech.com I Fax: +86-S71 -8768881 SI Tel: +86-571-87688883