xunison Hub D60 5G Powerful 5G CPE User Guide
- June 11, 2024
- xunison
Table of Contents
Hub D60 5G Powerful 5G CPE
User Guide
Product Introduction
Xunison Hub D60 5G is a powerful 5G CPE with Wi-Fi 6 Mesh solution, low
latency, and high capacity to connect more devices simultaneously with the
speeds up to 3.2 Gbps. Additionally, the product supports advanced
technologies such as Voice over LTE (VoLTE) and Voice over New Radio (VoNR),
enabling high-quality voice calls over cellular networks.
5G
5G LTE provides a home network with low latency, high speeds and extensive
coverage.
Wi-Fi 6
The wireless technology in this device supports multiple Wi-Fi standards,
including 802.11a/b/g/n/ac/ax, enabling seamless connections with both modern
and legacy Wi-Fi devices.
Mesh
This feature eliminates Wi-Fi dead zones in your home and expands the coverage
area of your Wi-Fi network, so you can enjoy strong and uninterrupted signals
throughout our home.
Parental Control
This feature is useful for monitoring and controlling a child’s activity on
the internet. It includes features such as filtering inappropriate web content,
setting time limits, and providing social supervision.
Product Installation
The D60 5G supports both wired network and cellular connectivity, giving
you the flexibility to choose the connection option that works best for you.
Depending on your reference and the availability of networks, you can select
either option to connect to the internet.
- Insert a SIM card to connect to the internet.
- Connect to the internet by using your home network.
2.1 – To insert a Nano SIM card into the Xunison Hub D60 5G, follow
these steps:
Step 1: Locate the SIM slot located at the bottom of the D60 5G, and
carefully follow the printed directions to insert the Nano-SIM card. Note that
you should not insert or nano t he SIM card while the device is powered
on, as this could potentially damage the device. Step 2: After inserting the
SIM card, connect the power adapter to the Xunison Hub D60 5G and power on the
device.
2.2- To connect the device to your home internet, follow these steps:
Step 1: Connect the Ethernet cable from your home internet to the WAN port
on the router (labeled “1”).
Step 2: Connect the power cable (labeled “2”) to the device.
Step 3: Press the power button (labeled “3”) to turn on the device.
Note: If you wish to use the device in satellite mode, disconnect cable
(1).
2.3 Product Configuration
Step 1: Connect your mobile device to the Unison Hub D60 5G network by
entering the Wi-Fi details printed on the devices sticker.
OR
Step 2: Alternatively, you can download the Xunison app from Google Play
store or App store.
After installing the app, log in with your registered account to access the
features of the Xunison Hub D60 5G.
LED indicators
LEDs | Color | Symbol | Status |
---|---|---|---|
Wi-Fi | Solid Green | Wi-Fi | Wi-Fi ON |
Blinking green | Mesh pairing mode | ||
OFF | Wi-Fi OFF | ||
5G | Solid Green | 5G | 5G network registered and operational |
Solid Red | 5G network registered but no data | ||
OFF | No 5G network registered/SIM card not | ||
4G | Solid Green | 4G | 4G network registered and operational |
Slow B Relinking en | 3G network registered | ||
OFF | No 4G/3G network registered/SIM card not inserted | ||
Phone | Green | Phone | VoLTE supported by SIM |
OFF | VoLTE not supported by SIM | ||
Internet | Green | Internet | Internet connected |
OFF | No internet connection | ||
Power | Solid Green | Power | Powered On |
OFF | Powered On |
Ports and Interfaces
| Ports| Description
---|---|---
DIV port,MAIN port| External antenna ports
USB 2.0| To charge devices such as smart phone, power bank, ear buds etc.
LAN ports| To connect PCs, Laptops, etc. via Ethernet cables.
WAN port| Connect Ethernet cable from Unison Hub D60 5G router to the
home internet.
Phone port| To connect landline to the Rj-11 port for voice calling.
Power port| For DC power supply (12V 2A).
SIM slot| To insert 5G/4G SIM for internet connectivity.
Button| Description
---|---
POWER| Turn Unison Hub D60 5G On/Off.
PAIR| Long press the PAIR button for 5-10 seconds to setup the Mesh mode.
Note: To connect to the gateway mode, press the PAIR button for 0-5
seconds.
RESE| Press the “RESET” button for 10 seconds to factory resetthe device to
the default settings.
Safety Guidelines
General tips:
Use only original and certified cables.
Avoid exposing the device to water during storage, transportation, and
operation.
Keep the device away from heat sources and ensure adequate ventilation.
Do not use any corrosive cleaner/oil to clean the device.
Keep the device out of reach of children.
Installation tips:
Check the cable connections after installing the device.
Place the Xunison Hub D60 5G in an appropriate location for seamless internet
connectivity.
Restart the device in case of any internet connectivity problems.
Change your Wi-Fi passwords regularly.
Caution:
Do not disassemble the device in case of malfunction or damage. Instead,
change the connections and contact technical support for assistance.
RF Parameters
2.4 GHz Wi-Fi | Frequency Range | Transmit Power (EIRP) |
---|---|---|
Function | 2412 ~ 2472 MHz | Max 20dBm |
5 GHz Wi-Fi | 5150 ~ 5850 MHz | Max 23dBm |
Support
For answers to your support questions and to access the latest downloads
and product services, please visit xunison.com/support. If you experience any
issues with our product features or functionality, you can also submit a
ticket for assistance.
Disposal Note
It is important to properly dispose of electronic waste to prevent harm to
the environment and human health. This product should be taken to a designated
collection point for recycling of waste electrical and electronic equipment.
You can contact your household waste disposal service or the seller of the
product for more information on where to drop off your waste equipment for
recycling.This means that the device is only permitted to operate on Wireless
Access Systems, such as radio local area networks, within the frequency band
of 5150-5350 MHz for indoor use only, and only within the countries of the
European Union listed: BE/BG/CZ/DK/DE/EE/IE/EL/ES/
FR/HR/IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/ NO/CH/IS/LI/UK(NI).
The device is not permitted to operate outdoors within this frequency band or
in other countries outside of the EU without the appropriate regulatory
approvals.
Decalartion of Conformity
Hereby, Xunison Ltd. declares that the radio equipment type D60 5G is in
complaince with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet
Compliance
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator and your body
Bracken Business Park, Bracken Rd, Sandyford Business Park,
Sandyford, Dublin, Ireland
www.xunison.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>