xunison Hub M20-E Dual Band WiFi Range Extender User Guide
- June 10, 2024
- xunison
Table of Contents
xunison Hub M20-E Dual Band WiFi Range Extender
Product Introduction
The Xunison Hub M20-E is a dual-band Wi-Fi range extender with a convenient wall-plug design and two external high-performance omnidirectional antennas. It provides over 100 Mbps of Fast Ethernet connectivity to devices such as laptops, gaming consoles, and smart speakers via an Ethernet port. The extender is compatible with any wireless router, gateway, or cable/ADSL modem that supports WiFi.
Plug and play configuration:
No additional configurations are required once the Xunison Hub M20-E is set up
successfully.
One-click fast pairing:
The Xunison Hub M20-E offers easy configuration for extending the coverage of
your existing WLAN network by simply pressing the WPS button on both the
Xunison Hub and the main router.
Stable Wi-Fi with two external 5dBi antennas:
The Xunison Hub M20-E utilizes external dual-band high-performance antennas
with MIMO technology to ensure stable and reliable performance.
Dual-band Wi-Fi:
With support for dual-band Wi-Fi, the Xunison Hub M20-E can operate on both
the 2.4GHz and 5GHz frequency bands, providing enhanced wireless performance,
flexibility, and speeds up to 1200 Mbps.
Product Installation
To install the Xunison Hub M20-E, follow the steps below:
- Plug the Xunison Hub into an electrical outlet near your router and wait for the device to power on. Note that the distance between your upper/main router and the device should be 2 meters.
- Press the WPS button (2.4G/5G) on the upper/main router and then press the corresponding WPS button on your Xunison Hub M20-E (i.e., 2.4G/5G) according to the actual relay needs.
- Wait for the 2.4G/5G LED to turn solid green, indicating a successful installation.
- Once the Xunison Hub M20-E is successfully set up, you can relocate the device within the router’s wireless signal coverage area. Allow about one minute for the device to adjust and check the color of the 2.4G/5G LED to ensure that the connection is stable.
To adjust the position of the range extender, follow the steps below:
- As the Xunison Hub M20-E has a plug-and-play configuration, no additional configurations are required.
- Ensure the device is installed at a suitable location. Refer to the following LED indicators to determine if the device is at an optimal distance from your router:
- Once the Xunison Hub is installed in a suitable location, you can connect your smartphone, laptop, and other devices to the hub. You can use the same SSID as your upper/main router or choose a new SSID. The Wi-Fi password is the same as your existing router.
Installation Tips:
- Install the extender in a location where there are no obstacles, such as walls or large furniture, blocking the signal.
- To avoid band interference, the device should be placed at a certain distance from home appliances operating in the 2.4 GHz band, such as microwave ovens and Bluetooth devices
LED Indicators
Ports and Interfaces
| LAN Port | For connecting your computer/laptop |
|---|---|
| RST Button | Press and hold this button for more than 5 seconds to reset the |
extender to its factory default settings
2.4G WPS Button| One-click fast pairing. After starting the WPS function of
the upper router, press the WPS button on the extender, and then the extender
connects to the wireless router.
SG WPS Button| One-click fast pairing. After starting the WPS function of the
upper router, press the WPS button on the extender, and then the extender
connects to the wireless router.
Safety Guidelines
Attention
- Use original and certified cables.
- Ensure the device does not come into contact with water during storage, transportation, and operation.
- Keep away from heat sources and ensure the device has adequate ventilation.
- Do not use any corrosive cleaner/oil to clean the device.
- Keep out of the reach of children.
Tips
- Please check the cable connections once the device is installed.
- Place the Xunison Hub M20-E in an appropriate place for seamless internet connectivity.
- Restart the device in case of any internet connectivity problems.
- Change your Wi-Fi passwords often.
Caution
In case of a malfunction or damage, the user should not disassemble it. Change
the connections instead and contact technical support for assistance.
RF Parameters
| Function | Frequency Range | Transmit Power (EIRP) |
|---|---|---|
| 2.4 GHz Wi-Fi | 2412 ~ 2472 MHz | Max 20dBm |
| 5 GHz Wi-Fi | 5150 ~ 5850 MHz | Max 23dBm |
For additional information
Please visit xunison.com/support to find answers
to your support questions and access the latest downloads and product
services. You can also submit a ticket for any issues you may face with our
product. features and functionality.”
Disposal Note
It is important to properly dispose of electronic waste to prevent harm to the
environment and human health. This product should be taken to a designated
collection point for the recycling of waste electrical and electronic
equipment. You can contact your household waste disposal service or the seller
of the product for more information on where to drop off your waste equipment
for recycling.
This means that the device is only permitted to operate on Wireless Access Systems, such as radio local area networks, within the frequency band of 5150-5350 MHz for indoor use only, and only within the countries of the European Union listed: BE/BG/CZ/DK/DE/EE/IE/EL/ES/. The device is not permitted to operate outdoors within this frequency band or in other countries outside of the EU without the appropriate regulatory approvals.
Declaration of conformity
Hereby, Xunison Ltd. declares that the radio equipment type M20-E is in compliance with Directive 2014/53/EU.
Compliance
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inter- ference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
xunison
Bracken Business Park, Bracken Rd, Sandyford Business Park, Sandyford,
Dublin, Ireland.
www.xunison.com.