3M LBL 143 Littmann CORE Digital Stethoscope User Guide
- June 11, 2024
- 3M
Table of Contents
Littmann®
CORE Stethoscope
Connects to Eko Software
3M™ Littmann®
CORE Digital Stethoscope
Quick Start Guide
Charge the Littmann CORE stethoscope prior to first use. After it is charged,
your stethoscope is ready to use.
Download the Eko App (where available) from the Apple App Store® or the Google
Play Store® to access additional features of the Littmann CORE stethoscope
including wireless listening, advanced sound and filtering control, automated
cardiac disease detection (where available, may require additional
subscription), as well as saving and sharing recordings.
Scan with your phone’s camera to download the Eko App.
In the Box
- Eko CORE Digital Attachment and 3M™ Littmann® Cardiology IV™ Stethoscope
- Additional set of 3M Littmann Snap Tight Soft-Sealing Eartips (small)
- Nonchill Bell Sleeve
- USB Charging Cable
- Quick Start Guide
Eartips
Insert eartips in a forward direction.
Volume
Use the (+) and (-) buttons to adjust volume.
There are 7 volume steps.
Turn On and Off
When the CORE stethoscope is off, it functions as an unamplified stethoscope.
To turn the CORE stethoscope on, press the power toggle in. The light will
begin flashing.
You will now hear amplified and filtered sound in the eartips.
Telemedicine and AI Features
Eko offers telemedicine and AI features that require a software subscription
(where available, sold separately).
You can setup a subscription online at ekohealth.com
Active Noise Cancelling
The CORE stethoscope includes active noise cancelling to remove ambient noise from the surrounding environment. Active noise cancelling can be turned off or on through the Eko App.
Notifications
| (blinking) | (yellow) | (yellow) |
|---|
CORE
stethoscope is on & seeking device| CORE
stethoscope is off & charging| CORE
stethoscope is low on battery
CORE
stethoscope is on & connected| (green)
CORE
stethoscope is fully charged| (blue)
CORE
stethoscope is recording
Recording
When connected to the Eko App, press the (o) button to begin recording.
Charging
Connect the micro USB cable to the CORE Stethoscope and use a UL-certified or CE-marked 5V USB wall charger. The CORE stethoscope will take about 2 hours to fully charge. The light will turn green when it is fully charged.
User Manual
Review the user manual before using your Littmann CORE Stethoscope. To view
the manual visit: ekohealth.com/getstarted
For more information on 3M devices, see
HCBGregulatory.3M.com
Service and Support
In the USA, please visit littmann.com/service
or call 1-800-228-3957. If you are
outside of the USA,
please visit littmann.com for the contact information
of your local 3M office.
Apple App Store is a trademark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Bluetooth® is a registered trademark of Bluetooth SIG LBL 143 Rev A
Stethoscope Made in the USA
CORE Digital Attachment Made in Malaysia
Assembled and distributed by 3M Company for
Eko Devices, Inc.
1212 Broadway, Suite 100 Oakland, CA 94612 USA
1-800-228-3957 (USA only)
1-844-356-3384
www.littmann.com
****©2022 3M; Eko Devices Inc. All rights reserved.
3M, Littmann, the L Littmann logo, the L, and Cardiology IV are marks and/or
registered marks of 3M. Unauthorized use prohibited. Used under license in
Canada.
Eko trademarks, including CORE, are marks and/or registered marks of Eko
Devices Inc.
© 3M, 2022; Eko Devices Inc.
Issue Date: 2022-03
34-8728-3018-6
References
- Eko Digital Stethoscopes, AI Disease Detection, & Telehealth
- eIFU Health Care
- Littmann Stethoscopes | 3M United States
- USA Warranty & Repairs for Littmann Stethoscopes | 3M
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>