3M LBL143-1 Littmann CORE Digital Stethoscope User Guide

June 11, 2024
3M

Littmann
CORE Stethoscope
Connects to Eko Software
3M LBL143 1 Littmann CORE Digital
Stethoscope

3M™ Littmann ® CORE Digital Stethoscope

Quick Start Guide
Charge the Littmann CORE stethoscope prior to first use. After it is charged, your stethoscope is ready to use.
Download the Eko App (where available) from the Apple App Store ® or the Google Play Store ® to access additional features of the Littmann CORE stethoscope including wireless listening, advanced sound and filtering control, automated cardiac disease detection (where available, may require additional subscription), as well as saving  and sharing recordings.

3M LBL143 1 Littmann CORE Digital Stethoscope - iconhttps://qrco.de/bcLlsA

Scan with your phone’s camera to download the Eko App.

In the Box

  • Eko CORE Digital Attachment and 3M™ Littmann ® Cardiology IV™ Stethoscope
  • Additional set of 3M Littmann Snap Tight Soft-Sealing Eartips (small)
  • Nonchill Bell Sleeve
  • USB Charging Cable
  • Quick Start Guide

Eartips
Insert eartips in a forward direction.3M LBL143 1 Littmann CORE Digital
Stethoscope - fig

Volume
Use the (+) and (-) buttons to adjust volume. There are 7 volume steps.
Turn On and Off
When the CORE stethoscope is off, it functions as an unamplified stethoscope.
To turn the CORE stethoscope on, press the power toggle in. The light will begin flashing. You will now hear amplified and filtered sound in the eartips.
Telemedicine and AI Features
Eko offers telemedicine and AI features that require a software subscription (where available, sold separately).
You can setup a subscription online at ekohealth.com Active Noise Cancelling The CORE stethoscope includes active noise cancelling to remove ambient noise from the
surrounding environment. Active noise cancelling can be turned off or on through the Eko App.

Notifications

(blinking)
CORE
stethoscope is on & seeking device
(yellow)
CORE
stethoscope is off & charging
(yellow)
CORE
stethoscope is low on battery
CORE stethoscope is on & connected
(green)
CORE stethoscope is fully charged
(blue)
CORE stethoscope is recording
Recording
When connected to the Eko App,  press the (o) button to begin recording.

Charging

Connect the micro USB cable to the CORE stethoscope and use a UL-certified or CE-marked 5V USB wall charger. The CORE stethoscope will take about 2 hours to fully charge. The light will turn green when it is fully charged.
User Manual
Review the user manual before using your Littmann CORE Stethoscope. To view the manual visit: ekohealth.com/getstarted
For more information on 3M devices, see HCBGregulatory.3M.com

Service and Support

In the USA, please visit littmann.com/service or  call 1-800-228-3957. If you are outside of theUSA, please visit littmann.com for the contact information of your local 3M office.
Apple App Store is a trademark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Bluetooth ® is a registered trademark of Bluetooth SIG LBL 143 Rev B

Made in USA with
Globally Sourced Materials
3M Company 2510 Conway
Ave. St. Paul, MN 55144
USA| 3M Deutschland GmbH Health Care Business Carl-Schurz-Str. 1
41453 Neuss, Germany| Made in Malaysia Eko
Devices, Inc. 1212 Broadway,
Suite 100 Oakland, CA 94612
USA
---|---|---

System assembled by 3M Company
3M Deutschland GmbH
Health Care Business
www.littmann.com
©2022 3M; Eko Devices Inc. All rights reserved.
3M, Littmann, the L Littmann logo, the L, and Cardiology IV are marks and/or registered marks of 3M. Unauthorized use prohibited.
Eko trademarks, including CORE, are marks and/or registered marks of Eko Devices Inc.
Issue Date: 2022-03
34-8728-3019-4

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals