LITHONIA LIGHTING BLT4 BLT Best In Value Low Profile LED Luminaire Owner’s Manual

: June 11, 2024
: LITHONIA LIGHTING

Table of Contents

LITHONIA LIGHTING BLT4 BLT Best In Value Low Profile LED Luminaire
Product Information
Product Specifications
Product Features
Product Usage Instructions
FEATURES & SPECIFICATIONS
ORDERING INFORMATION
Multiple Diffuser Options
Accessories & Replacement Parts
JOT Wireless
nLight Platform
Sensor Coverage Pattern
Controls Accessories
Constant Lumen Management
PHOTOMETRICS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LITHONIA-LIGHTING-lgoo

LITHONIA LIGHTING BLT4 BLT Best In Value Low Profile LED Luminaire

Product Information

The BLT Series LED is a 1′ x 4′ LED luminaire that comes with two diffuser options – ADP and SDSM. It is designed to be embedded with nLight controls, making it future-ready and scalable. This luminaire is A+ capable, which ensures consistent color appearance and out-of-the-box control compatibility with simple commissioning.
It is available in different lumen outputs, efficiency levels, color temperatures, and control options.

Product Specifications

Type: BLT Series LED
Length: 47-3/4 inches (121.2 cm)
Width: 11-3/4 inches (29.8 cm)
Depth: 2-3/4 inches (6.9 cm)
Static Depth with Air supply/return: 3-5/8 inches (9.2 cm)
ISO Class 5-9

Product Features

User-friendly installation
Enhanced energy savings
Code compliance
Space configuration

Product Usage Instructions

The BLT Series LED luminaire can be used for commercial indoor lighting applications. Follow the below instructions for product usage:

Select the appropriate BLT4 model based on your requirements.
Select the diffuser option from ADP and SDSM based on your preference.
Choose the appropriate voltage and driver type based on your power supply.
Select the desired color temperature for the luminaire.
Choose the nLight interface option based on your control requirements.
Consult with your sales representative to determine the lead time for your selected options.
Install the luminaire according to the manufacturer’s instructions and ensure that it is embedded with nLight controls to enable future scalability and energy savings.
Commission the A+ capable luminaire using simple commissioning methods by following the instructions provided in the user manual.

FEATURES & SPECIFICATIONS

INTENDED USE — The BLT Best-in-Value Low Profile LED luminaire features a popular center basket design that offers a clean, versatile style and volumetric distribution. High efficacy LED light engines deliver energy savings and low maintenance compared to traditional sources. An extensive selection of configurations and options make the BLT the perfect choice for many lighting applications including schools, offices and other commercial spaces, retail, hospitals and healthcare facilities. The low profile BLT design (2-3/4″) also makes it an excellent choice for renovation projects.
CONSTRUCTION — Prior to fabrication, BLT components are coated with a proprietary paint blend and die-formed for dimensional consistency.
The BLT reflector is available in both smooth and ribbed finishes. Choose RB from the fixture style section below for a ribbed finish.
End plates contain easy-to-position integral T-bar clips for securely attaching the luminaire to the T-grid. For additional T-grid security, optional screw on T-bar clips are available.
Diffusers are extruded from impact modified acrylic for increased durability.
LED boards and drivers are accessible from the plenum.
OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions and vertical and horizontal work surfaces – rendering the interior space, objects and occupants in a more balanced, complimentary luminous environment. High performance extruded acrylic diffusers conceal LEDs and efficiently deliver light in a volumetric distribution. Four diffuser choices available – curved and square designs with ribbed or a smooth frosted finish.
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 80% LED lumen maintenance at 60,000 hours (L80/60,000). Color Variation within 3-step MacAdam ellipse (3SDCM).
Non-Configurable BLT: Generic 0-10 volt dimming driver. Dims to 10%
Configurable BLT: available in High Efficiency (HE) versions for applications where a lower wattage (over the standard product) is required. The High Efficiency versions deliver >130 LPW and can be specified via the Lumen Package designations in the Ordering Information below.
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight®controls make each luminaire addressable – allowing them to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Connection to nLight is simple. It can be accomplished with integrated nLight AIR wireless RIO, RES7 sensors, or through standard Cat-5 cabling. nLight offers unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission. nLight AIR is commissioned easily through an intuitive mobile app.
Lumen Management: Unique lumen management system (option N80) provides on board intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.
SENSOR — Integrated sensor (individual control): Sensor Switch MSD7ADCX ((Passive infrared (PIR)) or MSDPDT7ADCX ((PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering the space. See page 4 for more details on the integrated sensor.
Integrated Sensor (nLight Wired Networking): This sensor is nLight- enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. See page 4 for the nLight sensor options.
Integrated Smart Sensor (nLight Air Wireless Platform): The RES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is available with an automatic dimming photocell, and either a digital PIR or microphonics (PDT) dual technology occupancy sensor. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 4 for more details on the Integrated Smart Sensor.
Integrated Wireless Sensor (single room control): Sensor Switch VERTEX JOT or JOTVTX15 luminaire-embedded occupancy and ambient light sensor allows the luminaire to power off when the space is unoccupied or when enough ambient light is entering the space. See page X for more details on the integrated wireless sensor.
INSTALLATION — The BLT’s low profile design of only 2-3/4″ provides increased installation flexibility especially in restrictive plenum applications. Designed for use in NEMA standard Type G (1″ & 15/16″) , NFG (9/16″), and SS (9/16″) grid ceilings. Consult factory about other ceiling types.
For recessed mounting in hard ceiling applications, Drywall Grid Adapters (DGA) are available as an accessory. See Accessories section. Suitable for damp location.
LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. Tested in accordance with ISO 14644-1; suitable for ISO Class 5-9 positive and negative pressure clean rooms.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights. org/QPL to confirm which versions are qualified.
BUY AMERICAN — Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT.
Please refer to www.acuitybrands.com/buy- american for additional information.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements in this speciﬁcation sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and- conditions
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Specifications

Length: 47-3/4 (121.2)
Width: 11-3/4 (29.8)
Depth: 2-3/4 (6.9)
Depth with Air supply/return: 3-5/8 (9.2)
All dimensions are inches (centimeters) unless otherwise specified.

Embed nLight controls today. Prepare for tomorrow.

Now

User-friendly install

Enhanced energy savings

Code compliance

Tomorrow

Scalability

Space configuration

Future-ready

Capable Luminaire

This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

All conﬁgurations of this luminaire meet the Acuity Brands’ speciﬁcation for chromatic consistency
This luminaire is part of an A+ Certiﬁed solution for nLight® control networks when ordered with drivers marked by a shaded background*
This luminaire is part of an A+ Certiﬁed solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus. *See ordering tree for details.

ORDERING INFORMATION

Lead times will vary depending on options selected. Consult with your sales representative.

Example: BLT4 30L ADP EZ1 LP835

BLT4| | | | | | |
---|---|---|---|---|---|---|---
Series| Fixture Style| Air function| Lumens ‡| Diffuser| Voltage| Driver| Color temperature
BLT4 1×4 BLT| (blank) RB| Smooth Reflector

Ribbed Reflector

| (blank) Static

A Air supply/ return ‡

| Standard efficiency ( >100 LPW)

15L 1500

20L 2000

30L 3000

40L 4000

48L 4800

60L 6000

| High efficiency ‡ ( >130 LPW)

15LHE 1500

20LHE 2000

30LHE 3000

40LHE 4000

48LHE 4800

60LHE 6000

| ADP Curved, ribbed

ADSM Curved, smooth

SDP Square, ribbed

SDSM Square, smooth

Includes trim rings to match sensored version

ADPT Curved, ribbed ADSMT Curved, smooth SDPT Square, ribbed SDSMT Square, smooth

| (blank) MVOLT 120 120V

277 277V

347 347V ‡

| EZ1 GZ1 GZ10 SLD| eldoLED dims to 1% (0-10 volt dimming)

Dims to 1% (0-10V dimming) ‡

Dims to 10% (0-10V dimming) ‡

Step-level dimming ‡

| LP830 82CRI, 3000 K LP835 82CRI, 3500 K LP840 82CRI, 4000 K LP850 82CRI, 5000 K LP930 90CRI, 3000K LP935 90CRI, 3500K LP940 90CRI, 4000K LP950 90CRI, 5000K
|
nLight Interface| Control ‡
nLight Wired

(blank) no nLight ® interface

N80 nLight with 80% lumen management N80EMG nLight with 80% lumen management

For use with generator supply EM power ‡

N100 nLight without lumen management N100EMG nLight without lumen management

For use with generator supply EM power ‡

nLight Wireless

(blank) no nLight ® interface

NLTAIR2 nLight AIR Generation 2 enabled ‡ ****

| nLight Wired

(blank) No sensor control

NES7 nLight™ nES 7 PIR integral occupancy sensor ‡

NESPDT7 nLight AIR control with PDT dual technology integral occupancy sensor and automatic dimming photocell ‡

NES7ADCX nLight™ nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell ‡

NESPDT7ADCX nLight™ nES PDT 7 dual technology integral occupancy sensor with automatic dimming photocell ‡ nLight Wireless

RES7 nLight AIR control with PIR integral occupancy sensor and automatic dimming photocell

RES7PDT nLight AIR microphonics dual technology occupancy sensor with automatic dimming photocell RIO nLight AIR radio module without sensor

RES7EM nLight AIR PIR integral occupancy sensor with automatic dimming photocell and UL924 Emergency Operation, via power interrupt detection ‡

RES7PDTEM nLight AIR microphonics dual technology occupancy sensor with automatic dimming photocell and UL924 Emergency Operation, via power interrupt detection ‡

RIOEM nLight AIR radio module less sensor, with UL924 Emergency Operation, via power interrupt detection ‡

| Individual Control

MSD7ADCX PIR integral occupancy

sensor with automatic dimming control photocell ‡

MSDPDT7ADCX PDT integral occupancy

sensor with automatic dimming control photocell ‡

JOT Wireless room control with “Just One

Touch” pairing ‡

JOTVTX15 Wireless occupancy sensor with “Just One Touch” pairing ‡

|
Standy Mode| Options
NOC NOC Occupancy

sensor disabled ‡

| BDP Disconnect Plug

EL7L 700 lumen battery pack (Noncompliant with CA T20) ‡

EL14L 1400 lumen battery pack (Noncompliant with CA T20) ‡

EL14LSD 1400 lumen battery pack with

self-diagnostic testing feature (Noncompliant with CA T20) ‡

E10WLCP EM Self-Diagnostic battery pack,

10W Constant Power, Certified in CA Title 20 MAEDBS ‡

| CP BGTD

PWS1836 PWS1846 PWS1846 PWSLV

PWS1856LV

| Chicago plenum ‡

Bodine Generator Transfer Device ‡

6′ pre-wire, 3/8″ diameter, 18 gauge, 1 circuit

6′ pre-wire, 3/8″ diameter, 18 gauge, 2 circuit Two cables: one 6′ pre-wire, 3/8″

diameter, 18 gauge, 2 circuits; one 6′ pre-wire, 3/8″ diameter, 18 gauge ‡

6′ pre-wire, 3/8″ diameter, 18 gauge, 1 circuit w/low voltage wires ‡

| | GLR Fast-blowing fuse ‡

GMF Slow-blowing fuse ‡

NPLT Narrow pallet

RRL_ RELOC®-ready luminaire ‡

LATC Earthquake clip DWAM Anti-Microbial paint

IP5X Gasketed diffuser compartment to meet IP5X rating ‡

BAA Buy America(n) Act Compliant

NOTE: ‡ indicates option value has ordering restrictions. Please reference the Option Value Ordering Restictions chart on the next page. Options are sorted alphanumerically.

‡ Option Value Ordering Restrictions

Option value| Restriction
347| Not available with SLD, EL7L, EL14L, or E10WLCP options.
A| Not available with RB fixture style, consult factory for air flow data.
BGTD| Not available with JOT, JOTVTX15 sensor options or emergency battery options. Must specify voltage. Requires BSE labeling, voltage specific. Consult factory for options. Example: BGTD BSE10.
Control| Must specify diffuser with trim rings.
CP| Not available with N80, N80EMG, N100, N100EMG, PWS1836, PWS1846, PWS1846 PWSLV or PWS1856LV.
GZ1, GZ10| Not available with any Control or Sensor options except JOT & JOTVTX15
EL7L, EL14L, EL14LSD, E10WLCP| When using pre-wire option, use PWS1846 or PWS1846 PWSLV. For more information on the EL14LSD, please see the PSSD2 specification sheet.
GLR, GMF| Must specify voltage. 120 or 277, with GLR and GMF fusing.
IP5X| Not available with air supply/return or Wired Networking (NES) and Individual Control (MSD) sensors.
JOT, JOTVTX15| Not available with SLD, nLight, NLTAIR2, NOC, or BGTD options.
Lumens| Approximate lumen output. For high Efficiency, all versions may not achieve 130+ LPW. Refer to photometry on www.acuitybrands.com. Air supply/return option, 90 CRI, and versions with integral sensor trim rings may not achieve 130 LPW.
MSD7ADCX, MSDPDT7ADCX| Only available with EZ1 driver option. 0-10v dimming wires not accessible via access plate.
NES7, NESPDT7, NES7ADCX, NESPDT7ADCX| Requires N80, N80EMG, N100, or N100EMG. Only available with EZ1 driver.
NLTAIR2| Must order with nLight Wireless option from Control section. Only available with EZ1 driver.
NOC| Can only be ordered in conjunction with EZ1, NLTAIR2, RES7/RES7PDT. Occupancy sensor disabled at factory but can be re-enabled upon commissioning.
N80EMG, N100EMG| nLight EMG option requires a connection to existing nLight network. Power is provided from a separate N80 or N100 enabled fixture.
PWS1846 PWSLV, PWS1856LV| Not available with nLIGHT wired network or individual controls
RES7EM, RES7PDTEM, RIOEM| See UL924 Sequence of Operation chart on page 3.
RRL_| For ordering logic consult: RRL_2013.
SLD| Not available with any nLight Interface or Control options.

Multiple Diffuser Options

Non-Configurable BLT

Non-Configurable BLT

Stock/MTO| Catalog Description *| UPC| Lumens| Wattage| LPW| Color Temperature| Voltage| Pallet Qty
Stock| BLT4 40L ADP LP835| 00190887466218| 4114| 33.09| 124.31| 3500K/82 CRI| 120-277| 39
| BLT4 40L ADP LP840| 00190887465228| 4179.68| 33.09| 126.3| 4000K/82 CRI| 120-277| 39
| BLT4 40L ADP EL14L LP835| 00190887466621| 4114| 33.09| 124.31| 3500K/82 CRI| 120-277| 39
| BLT4 40L ADP EL14L LP840| 00190887466614| 4179.68| 33.09| 126.3| 4000K/82 CRI| 120-277| 39
MOUNTING DATA

Ceiling Type| Appropriate Trim Type
Exposed grid tee (1′ and 9/16″)|

G

Concealed grid tee| G
Plaster or plasterboard| G*

*DGA accessory available to provide ceiling trim ﬂange and ﬁxture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4″ x 24-3/4″ (Tolerance is +1/8″, -0″).

UL924 Sequence of Operation

For 90 minutes following any complete AC power interruption >200 ms:

Digital dimming is commanded to high end trim level.
Device ignores wireless lighting control commands.

Accessories & Replacement Parts

Accessories: Order as separate catalog number.
DGA14 Drywall grid adapter for 1×4 recessed fixture 1X4SMKSHP PAF Surface Mount Troffer Kit Post Paint

RK8BDP 2P U Disconnect Plug (BDP), 2 Pole, Package of 1 RK8BDP 3P U Disconnect Plug (BDP), 3 Pole, Package of 1 RK8BDP 2P J10 Disconnect Plug (BDP), 2 Pole, Package of 10 RK8BDP 2P J40 Disconnect Plug (BDP), 2 Pole, Package of 40

Emergency Battery Pack Options – Field Installable

Battery Model Number| Wattage| Runtime (Minutes)| *Lumen Output @ 120 Lumens/Watt| Other**
---|---|---|---|---
ILB CP07 2H A| 7W| 120| 840| Storm Shelter/ 2-hour Runtime
ILB CP10 A| 10W| 90| 1200|
ILBLP CP10 HE SD A| 10W| 90| 1200| Title 20, Self Diagnostic
ILBLP CP15 HE SD A| 15W| 90| 1800| Title 20, Self Diagnostic
ILB CP20 HE A| 20W| 90| 2400| Title 20
ILB CP20 HE SD A| 20W| 90| 2400| Title 20, Self Diagnostic

All the above are UL Listed products that are certiﬁed for ﬁeld install external/remote to the ﬁxture.
*Minimum delivered lumen output to assist in product selection for increased ﬁxture mounting height.
The CP10 delivered emergency illumination outperforms legacy 1400 lumen ﬂuorescent emergency ballast. Please contact us at productsupportemergency@acuitybrands.com for any Emergency Battery related questions.

JOT Wireless

Sensor Switch JOT Enabled Wireless Solution
Designed with contractors in mind, the Sensor Switch JOT enabled wireless solution offers a straightforward approach to the installation and pairing of lighting fixtures and controls. Absolutely no 0-10V control wires and no mobile apps are needed with JOT enabled products, allowing for lightning speed installation right out of the box.

Power: Install JOT enabled fixtures and controls as instructed.
Pair: Insert the pairing tool into the pinhole on the wall switch; press and hold any button for 6 seconds.
Play: Once paired, each fixture will individually dim down to 10% brightness. All products will be fully functional.

nLight Platform

nLight embedded fixtures offer:	Customers get:
Manual Dimming	Convenience and visual comfort for occupants
Motion Sensing and/or Daylight Harvesting	Energy savings and code compliance
Fixture or Group Level Control	Ability to configure lighting to the space

requirements
Flexibility| Ease of fixture moves, adds and changes
Wireless Wall Switch (nLight AIR Only)| Ease and flexibility of placement
Astronomical and Time of Day Scheduling| Energy savings and building security
Scalable Solution| nLight controls to grow with your business
Future-Ready| nLight platform to set foundation for future upgrades and capabilities

nLight Air Wireless

Simple as 1,2,3

Install the nLight® AIR fixtures with embedded smart sensor
Install the wireless battery-powered wall switch
With CLAIRITY app, pa ir the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome

nLight Wired Networking

Simple as 1,2,3

Install the nLight® Wired fixtures with embedded control
Install the nLight Wired wall switch
Connect the fixtures using standard CAT5e cables and the devices will automatically discover each other and work (plug and play)

Sensor Options

Option

| Automatic Dimming Photocell| Occupancy Sensing| nLight Wired Networking| nLight AIR Networking
PIR| PDT
MSD7ADCX| X| X| | |
MSDPDT7ADCX| X| | X| |
NES7| | X| | X|
NES7ADCX| X| X| | X|
NESPDT7| | | X| X|
NESPDT7ADCX| X| | X| X|
RES7| X| X| | | X
RESPDT7| X| X| X| | X

Integrated Sensor with Individual Control
The MSD7ADCX PIR occupancy sensor/automatic dimming photocell is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving.
The MSDPDT7ADCX PIR/Microphonics Dual Tech occupancy sensor/automatic dimming photocell is ideal for areas with obstructions and where daylight harvesting is desired. Suggested applications include, but not limited to, open offices, private offices, classrooms, public restrooms, and conference rooms.

Sequence of Operation (MSD7 Sensor)

Sensor Coverage Pattern

Mini 360° Lens

Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)
Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m).
Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)
Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor

9 FT Mounting

nLight AIR Wireless
nLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and nLight AIR is available with or without an integral sensor. The integrated rES7 or rES7PDT smart sensors are part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.

nLight Wired Networking
The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the nES7ADCX includes an integrated photocell, which enables daylight harvesting controls.
For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy. Additionally, the nESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present.

Controls Accessories

nLight ® Wired Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight .

BLT fixtures with integrated rIO devices complement any small office space. Pair them with an rCMS occupancy sensor and the space now has wireless occupancy sensing and dimming capability. For additional configuration options please consult with Tech Support.

nLight ® AIR Control Accessories:

Order as separate catalog number. Visit www.acuitybrands.com/products/ controls/nlightair .

rCMS 1

Series / Detection	Power Supply 1	Occupancy
Detection	Lens (Required)	Operating Mode

Generation
RCMS| nLight AIR occupancy and daylight sensor| [blank] PS 150| Power Supply ordered separately

Standard 150 mA Power Supply

| [blank] PDT| PIR Detection

Dual Tech PIR/ Microphonics

| 10

9

6

| Large Motion/ Extended Range 360°

Small Motion/ Extended Range 360°

High Bay 360° Lens

| [BLANK] AR| None

Auxiliary Relay

| G2 Generation 2 compatibility

Notes
1 RCMS requires low voltage power from either RPP20 DS 24V G2 or PS150.

Constant Lumen Management

Enabled by the embedded nLight control, the BLT actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting .

PHOTOMETRICS

BLT4 40L ADP LP835, 4114 delivered lumens, test no. ISF35685P49, tested in accordance to IESNA LM-79

BLT4 48L ADP LP835, 4888 delivered lumens, test no. ISF35685P114, tested in accordance to IESNA LM-79

Performance Data

Model Number| Lumens| LPW| Watts| DLC Listing| DLC ID
BLT4 15L ADP EZ1 (GZ1, GZ10) LP840[All Options]| 1450.79| 123.83| 11.71| Premium| PITJ7LZR
BLT4 15L ADPT EZ1 (GZ1, GZ10) LP840[All Options]| 1429.13| 121.98| 11.71| standard| PGT9ZM85
BLT4 20L ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 1907| 124.24| 15.34| Premium| P6TRMV97
BLT4 20L ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 1937.44| 126.22| 15.34| Premium| PYGYBGA4
BLT4 20L ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 1908.51| 124.34| 15.34| Premium| P62XJ7B5
BLT4 20L ADPT EZ1 (GZ10) LP835 [All Options]| 1878.52| 126.92| 14.8| Premium| PSDPC339
BLT4 20L ADPT GZ1 LP835 [All Options]| 1878.52| 122.38| 15.34| standard| PCPS6AYF
BLT4 30L ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 2918| 125.97| 23.16| Premium| PFTQCVDN
BLT4 30L ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 2964.58| 127.98| 23.16| Premium| PXYBVAFH
BLT4 30L ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 2874.42| 124.08| 23.16| Premium| PQB9V6BJ
BLT4 30L ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 2920.31| 126.07| 23.16| Premium| P8UXM7NX
BLT4 40L ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 4114| 124.31| 33.09| Premium| PMYRQ49V
BLT4 40L ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 4179.68| 126.3| 33.09| Premium| PGGU8V31
BLT4 40L ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 4117.26| 124.41| 33.09| Premium| PUEDT9VY
BLT4 40L ADPT EZ1 (GZ10) LP835 [All Options]| 4052.56| 124.84| 32.46| Premium| P42QKXVC
BLT4 40L ADPT GZ1 LP835 [All Options]| 4052.56| 122.46| 33.09| standard| PI8CCBNK
BLT4 48L ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 4888| 124.02| 39.41| Premium| PYZ4KMD4
BLT4 48L ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 4966.03| 126| 39.41| Premium| PQX799PT
BLT4 48L ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 4891.88| 124.12| 39.41| Premium| PNTGHKEN
BLT4 48L ADPT EZ1 (GZ10) LP835 [All Options]| 4815| 124.32| 38.73| Premium| P22X8T1X
BLT4 48L ADPT GZ1 LP835 [All Options]| 4815| 122.17| 39.41| standard| PJR9QMWQ
BLT4 60L ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 6133.38| 124.58| 49.23| Premium| P2DSW9MV
BLT4 60L ADP EZ1 (GZ10) LP835 [All Options]| 6037| 124.98| 48.3| Premium| PWMC3RXH
BLT4 60L ADP GZ1 LP835 [All Options]| 6037| 122.62| 49.23| standard| PIBQTI45
BLT4 60L ADPT EZ1 (GZ10) LP835 [All Options]| 5946.85| 123.12| 48.3| standard| P7JXFEX8
BLT4 60L ADPT EZ1 (GZ10) LP840 [All Options]| 6041.79| 125.08| 48.3| Premium| PJZS4XAG
BLT4 60L ADPT GZ1 LP835 [All Options]| 5946.85| 120.79| 49.23| standard| P43IPTQT
BLT4 60L ADPT GZ1 LP840 [All Options]| 6041.79| 122.72| 49.23| standard| PBR3M7AA

DLC information is subject to change, for the most up-to-date information please refer to www.dlc.org. Above listings do not cover 347v or SLD.

HE Performance Data

Model Number| Lumens| LPW| Watts| DLC Listing| DLC ID
BLT4 15LHE ADP EZ1 (GZ1, GZ10) LP835[All Options]| 1486| 127.29| 11.67| Premium| PTAG2QWR
BLT4 15LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 1509.72| 129.32| 11.67| Premium| PW6HZMN4
BLT4 15LHE ADPT EZ1 (GZ1, GZ10) LP835[All Options]| 1463.8| 125.39| 11.67| Premium| PM80L4KU
BLT4 15LHE ADPT EZ1 (GZ1, GZ10) LP840[All Options]| 1487.17| 127.39| 11.67| Premium| P3SW8CVO
BLT4 20LHE ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 1920| 126.59| 15.16| Premium| PPE50BKI
BLT4 20LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 1950.65| 128.61| 15.16| Premium| PNVCY7R2
BLT4 20LHE ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 1891.32| 124.7| 15.16| Premium| PH4BQPK3
BLT4 20LHE ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 1921.52| 126.69| 15.16| Premium| PX3ZLUGW
BLT4 30LHE ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 2987| 136.62| 21.86| Premium| PVOLKMTV
BLT4 30LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 3034.68| 138.8| 21.86| Premium| PQSG0MWX
BLT4 30LHE ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 2942.39| 134.58| 21.86| Premium| P0YU2QG4
BLT4 30LHE ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 2989.37| 136.73| 21.86| Premium| P7IA04ZL
BLT4 40LHE ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 4193| 137.85| 30.41| Premium| PTFZPNFT
BLT4 40LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 4259.94| 140.05| 30.41| Premium| PU2IGL4P
BLT4 40LHE ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 4130.38| 135.79| 30.41| Premium| PHHEA92E
BLT4 40LHE ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 4196.32| 137.96| 30.41| Premium| PPVT5JFT
BLT4 48LHE ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 4667| 133.48| 34.96| Premium| PJT47YU5
BLT4 48LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 4741.5| 135.61| 34.96| Premium| PX9KVBY3
BLT4 48LHE ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 4597.3| 131.49| 34.96| Premium| PBQR558K
BLT4 48LHE ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 4670.7| 133.59| 34.96| Premium| PRTND692
BLT4 60LHE ADP EZ1 (GZ1, GZ10) LP835 [All Options]| 5914| 130.91| 45.17| Premium| PD35F85D
BLT4 60LHE ADP EZ1 (GZ1, GZ10) LP840 [All Options]| 6008.41| 133| 45.17| Premium| PYKY93GZ
BLT4 60LHE ADPT EZ1 (GZ1, GZ10) LP835 [All Options]| 5825.68| 128.95| 45.17| Premium| PM297Q4P
BLT4 60LHE ADPT EZ1 (GZ1, GZ10) LP840 [All Options]| 5918.69| 131.01| 45.17| Premium| PSB3FUK4