Immax 08973L Corella Table Lamp Instructions

CORELLA TABLE LAMP
WITH WIRELESS QI CHARGING AND RGB BACKLIGHT

08973L – black | 08974L – white

INSTRUCTIONS FOR USE

Read the instructions carefully before using the lamp.

POWER CONNECTION

Plug the power adapter into the connector at the bottom of the lamp. Note: Use only the original power supply, do not use an extension extension cord or splitter, in which case it may the product may not function properly. Do not use adapter that does not match the output specified in the lamp parameters.
If the lights flicker or are noisy, check in time the power supply. Do not connect the metal point of the adapter to the other metals or permanent or dangerous damage to the
product may result. The included adapter is for this product only and is not intended for other uses.

ADJUSTING THE BRIGHTNESS

To adjust the brightness of the light: touch the touch control icon for the main light.
Repeatedly touch to select 3 levels of main light intensity, in order – dim light – medium light – strong light – off. A long touch of the switch toggles cold, natural or warm white light colour. The default setting, when switched on is low light.

RGB BACKLIGHT CONTROL

Short contact of the touch button on the back of the lamp body – triggers the RGB backlight. Repeated touch changes the 3 colour modes of the backlight.
Longer contact of the touch switch turns off the RGB backlight.

QI WIRELESS CHARGING

Wireless charging function. If your devices support Qi wireless charging function, simply insert it to the base of the lamp and your device will start charging.
Tips:
– Your device is charging – the charging indicator lights up red.
– Device fully charged – charging indicator glows green.
– Abnormal charging – charging indicator flashes red.

USB OUTPUT

USB output allows charging mobile phones, tablets and other electronic devices with 5V 2.1A output.

LIGHTING ANGLE ADJUSTMENT

Adjust the flexible arm of the lamp according to the lighting needs of the area to any angle from 0 – 120°.
Tip: The range of the lamp arm is 120° up and down and 160° rotation.
Flexible arm, do not bend excessively to avoid damage.

INCLUDED IN THE PACKAGE

Table lamp, adapter, user manual

SPECIFICATIONS

Rated wattage of LED lamp: 7.2W
Qi wireless charging wattage/output: 10W
USB output: 5V 2.1A output
Number of LEDs: 36 pcs, (24 cold color LEDs, 12 warm color LEDs)
Dimmable : yes
Brightness: cold color light 200-300lm, natural color light 350-450lm, warm color light 150-250lm
Light color: 3000-3300K / 4200-4600K / 5500-6000K
CRI(Ra) Color rendering index: >80
Input voltage AC100-240, 50-60Hz
Input current: 12V/3A
Power factor: >0.4
Operating Temperature: -20 to +50 °C
Material: metal, ABS, PVC
Start-up time: instant on
Dimensions: 568 x 99.7 x 134.7mm
Certifications: CE, RoHS

PRODUCT DATA SHEET

Note: Product pictures are for reference only.
Product image may show slight differences from actual product.
Warning:
– Surface cleaning – Wipe the lamp with a dry, soft cotton cloth, do not use any other cleaning agents.
– The light source is irreplaceable.
– If the product malfunctions, do not repair or disassemble the product yourself, mechanical damage could occur and the product will lose the right to claim.
You can contact the manufacturer for maintenance.

PRODUCT WARRANTY

The warranty service of this product is strictly in accordance with consumer regulations and product Quality Act in the Czech Republic.
Warranty Terms:
– Unauthorized maintenance, improper use, mechanical damage any part of the product, absorption or deterioration of liquid, altered or torn product label, or without a product label at all.
– Exceeding the warranty period; (2years)
– Damage caused by force majeure;
– Man-made performance failure

CONTAMINANT CONTENT

The form is based on SJ/T 11364.
o – Hazardous substance is below the limit of the standard. GB/T 26572
x – Hazardous substance exceeds the GB/T standard 26572 in at least one homogeneous component.

The form is based on standard of SJ/T 11364:
o : The hazardous substance is under the limit of the standard of GB/T 26572 in all homogeneous material of the component.
x : The hazardous substance is in excess of the standard of GB/T 26572 in at least one homogeneous material of the component

IMMAX, Pohoří 703, 742 85 Vřesina, EU
www.immax.cz 
Designed in the Czech Republic, manufactured in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>