ATOLL AV500 5-Channel Power Amplifier Owner’s Manual
- June 5, 2024
- ATOLL
Table of Contents
ATOLL AV500 5-Channel Power Amplifier
CONNECTINGS
- Center output.
- Rear left output.
- Rear right output.
- Front left output.
- Front right output.
- Center IN/OUT.
- Rear left IN/OUT.
- Rear right IN/OUT.
- Front left IN/OUT.
- Front right IN/OUT.
- Power plug and switch (with fuse).
- Power indicator led.
CABLE SCHEMATICS
Exemple de câblage avec 1 PR5.1 et 1 AV500 alimentant 5 enceintes. Il est possible de faire une bi-amplification à partir d’un préampli audio/vidéo et 2 AV500 (1 AV500 pour les aigus, l’autre pour les graves). Dans ce cas, utilisez les sorties cinch du 1er AV500 pour alimenter le 2éme AV500.
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE, and national transpositions.
GUARANTEE
The guarantee is two years long from the date of purchase. We recommend you to
ask your dealer to fill the guarantee and to conserve it. The guarantee is
only available for appliances that have been used correctly.
MAINTENANCE
Before any cleaning, switch off your device. Use a soft and dry rag to clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product containing an abrasive agent. Never try to clean up inside the appliance.
TECHNICAL DATA
Power Wrms/ch./8 Ω (230v): 5×85 W / 2×100 W
Power Wrms/ch./4 Ω (230v): 5×100 W / 2×140 W
Power supply: 2×340 VA
Total of capacitors: 73 000 μF
Number of Inputs: 2×5
Input Impedance: 47 kΩ
Sensitivity: from 1,58 V to 1,77 V
Signal/Noise rate: 100 dB
Distortion at 1kHz: 0,005 %
Frequency Response: 5 Hz – 200 kHz
Rising Time :1,3 μs
Dimensions: 440×270×90 mm
Weight: 11,0 kg
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your amplifier in a dry and well-ventilated place, far from a source of heat.
- Avoid putting something on your amplifier.
- Strictly respect polarity + & , as well as the left and right connections.
- Avoid any short-cut.
- Do not plug-in two speakers in parallel on the same output.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this time-lapse.
- Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- Your amplifier is equipped with a temporized switch on. A relay protects loudspeakers on the output power stage from over-voltage.
GUARANTEE ~ AV500 MODEL
To present to your dealer with the invoice when returning back the appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>