LINDY 38384 45m HDMI 8K60 Repeater User Manual

June 9, 2024
LINDY

LINDY-logo

LINDY 38384 45m HDMI 8K60 Repeater

LINDY-38384-45m-HDMI-Repeater-product

Product Information: 45m HDMI 8K60 Repeater

The 45m HDMI 8K60 Repeater is a product designed to extend high-quality HDMI signals up to distances of 45m. It is an active repeater that allows the connection of two long-length HDMI cables while amplifying the source signal to ensure maximum reliability without degradation. The product supports resolutions up to 7680×4320@60Hz 4:4:4 with DSC enabled and HDMI 2.1 features including dynamic HDR, DSC, HFR, VRR, QMS, QFT, and ALLM. It also has automatic EQ (sharpness) adjustment for optimal signal clarity. The product comes with a USB Type A to Mini-B cable and a LINDY manual.

Package Contents:

  • 45m HDMI 8K60 Repeater
  • USB Type A to Mini-B cable, 1.5m
  • Lindy Manual

Features:

  • Extends HDMI Signals up to a maximum of 45m using high-quality HDMI cables
  • Supports resolutions up to 7680×4320@60Hz 4:4:4 with DSC enabled
  • Supports HDMI 2.1 features including dynamic HDR, DSC, HFR, VRR, QMS, QFT, ALLM
  • Automatic EQ (sharpness) adjustment for optimal signal clarity

Specification:

  • HDMI 2.1
  • HDCP 2.3
  • Maximum bandwidth: 48Gbps
  • Maximum resolution: 7680×4320@60Hz 4:4:4 8bit
  • HDR Support: Dynamic HDR
  • Maximum distance: 45m

Product Usage Instructions:

To install the 45m HDMI 8K60 Repeater, please follow the steps below:

  1. Connect an HDMI cable from a source device to the Input port on the repeater.
  2. Connect an HDMI cable from the Output port on the repeater to an HDMI display.
  3. Power on the source and display device. Installation is now complete.

Troubleshooting:

If there is no display on the screen, please check the following:

  • Ensure all connections between the source, repeater, and display are secure. If not, disconnect and then re-connect each connection.
  • Ensure high-quality HDMI Ultra High-Speed cables are used to reach up to 8K resolutions.
  • Some HDMI source devices may not provide enough power for the repeater. In these cases, connect the included USB Type A to Mini-B cable to the repeater and a 5V  USB charger.

Introduction

Thank you for purchasing the 45m HDMI 8K60 Repeater. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. The Lindy 45m HDMI 8K60 Repeater is an ideal solution for extending high-quality HDMI signals up to distances of 45m. This active repeater allows the connection of two, long-length HDMI cables while amplifying the source signal to ensure maximum reliability without degradation.

Package Contents

  • 45m HDMI 8K60 Repeater
  • USB Type A to Mini-B cable, 1.5m
  • Lindy Manual

Features

  • Extends HDMI Signals up to a maximum of 45m using high-quality HDMI cables
  • Supports resolutions up to 7680×4320@60Hz 4:4:4 with DSC enabled
  • Supports HDMI 2.1 features including dynamic HDR, DSC, HFR, VRR, QMS, QFT, ALLM
  • Automatic EQ (sharpness) adjustment for optimal signal clarity

Specification

  • HDMI 2.1
  • HDCP 2.3
  • Maximum bandwidth: 48Gbps
  • Maximum resolution: 7680×4320@60Hz 4:4:4 8bit
  • HDR Support: Dynamic HDR
  • Maximum distance:
  • 8K60Hz 4:4:4 8bit – 4m In / 6m Out, Total: 10m (32.81ft)
  • 4K60Hz 4:4:4 8bit – 10m In / 15m Out, Total: 25m (82.02ft)
  • 1920×1080@60Hz 4:4:4 8bit – 20m In / 25m Out, Total: 45m (147.64ft)
  • Maximum power consumption: 1.5W
  • Operating temperature: 0°C – 40°C (32°F – 104°F)
  • Storage temperature: -20°C – 60°C (-4°F – 140°F)
  • Humidity: 0-80% RH (non-condensing)
  • Housing material: Metal

Installation

For installation, please follow the steps below.

  • Connect an HDMI cable from a source device to the “Input” port on the repeater
  • Connect an HDMI cable from the “Output” port on the repeater to an HDMI display.
  • Power on the source and display device. Installation is now complete.

Troubleshooting

If there is no display on the screen, please check the following:

  • Ensure all connections between the source, repeater, and display are secure. If so, disconnect and then re-connect each connection.
  • Ensure high-quality HDMI Ultra High-Speed cables are used to reach up to 8K resolutions.
  • Some HDMI source devices may not provide enough power for the repeater, in these cases, connect the included USB Type A to Mini-B cable to the repeater and a 5V USB charger.

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: [email protected],
T: +49 (0)621 470050

Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way Stockton-on-Tees, TS17 9JY
England
Email: [email protected],
T: +44 (0)1642 754000

No. 38384 1st Edition, June 2022lindy.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LINDY User Manuals

Related Manuals