PETLIBRO PLWF003 Stainless Steel Cat Water Fountain User Manual
- June 9, 2024
- PETLIBRO
Table of Contents
PETLIBRO PLWF003 Stainless Steel Cat Water Fountain
Safety Precautions
WARNING
- Dispose of all packaging materials properly. Keep polybags away from children and pets as these bags could cause suffocation.
- Do NOT allow children to play with, in, or around the pet water fountain.
- To avoid injury, please keep close supervision when the appliance is used near children.
- Do NOT use the water fountain with pets not able to reach the water tray or with any physical disability.
- Do NOT place any foreign objects in the water tank.
- Do NOT disassemble the pet fountain other than components as instructed in this User Manual.
- Do NOT use the pet fountain for anything other than its intended use.
- Only use attachments recommended or sold by the manufacturer. The use of attachments not recommended or sold by the manufacturer may cause an unsafe condition. Do NOT modify the pet fountain.
- Do NOT operate any appliance if the unit is malfunctioning or has been damaged. Do not attempt repairs on the device yourself. Contact our customer service immediately for further instructions.
- Be sure to disconnect the power supply for safety when the appliance is not in use.
- Please disconnect the power supply before maintaining and cleaning the machine.
- Always unplug the appliance when not in use; before putting on or taking off parts and before cleaning.
- The power adapter and wire plug must not be flooded during cleaning.
- This product is for indoor use only.
- This product is not allowed to run without water.
- Never pull the electrical power cord to remove the plug from the wall outlet.
- If the plug of this device gets wet, turn off the electricity of that wall outlet. Do NOT attempt to unplug.
- Check the device after installation. Do NOT plug in if there is water on the contact points or plug.
- To avoid tripping, always position the power cord out of the way of foot traffic.
- Do not use the appliance in the bathroom.
- Change the filter every 2-4 weeks or when the flow rate has noticeably reduced. For two or more cats, you may need to replace the filters more regularly if it becomes blocked.
CAUTION
- Do NOT allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard-plastic protector) at any hardware store to protect the power cord.
- If an extension cord is necessary, one unit with a proper rating should be used.
- Do NOT install or store the pet water fountain where it will be exposed to weather or temperatures below 0°C / 40°F.
- Read and observe all important notices listed on the pet water fountain and in the packaging.
Product Overview
- Water Flow Controller
- Water Outlet
- Drinking Basin
- Filter Cartridge
- Power Adapter
- Power Cable
- Pump Holder
- Sponge
- Water Pump
- Water Tank
How to Use
Step 1
Soak the filter in a clean bowl for 5 minutes.
Notes
- The filter must be fully soaked before the fountain is turned on; otherwise, water may not smoothly disperse through the filter and cause spillage.
- Do not soak the filter in the water tank of the fountain in case of any surface dust.
Step 2
Open the cover by lifting the handle.
Step 3
Install the pump holder first, then put the pump into the sponge. Press the
pump to make the suction cup under the pump sticks tightly.
Note: Make sure the pump is fixed in place in the tank.
Step 4
Put the activated carbon filter in the filter housing and close it.
Step 5
Fill the tank with water between “min” and “max”.
Note: To prevent spillage, do not add water above the MAX level.
Step 6
Put back the cover to form a seal.
Step 7
Connect the power adaptor
Care Instructions
-
Replace the carbon filter and sponge every 2-, weeks.
-
Clean the pump and fountain every two weeks.
Take off the pump cover and rotor. Use the brush to clean the parts with water. -
Keep the water level above the pump, as the pump will fail if it runs without water.
Troubleshooting
| Problem | Solution |
|---|---|
| Wate r **keeps spilling out of the water tray.** | **The |
filter may not be fully soaked Please soak the filter in a
clean bowl (not in the water tank) for 5 minutes before the frst use.
The pump stops working.| 1. Fill in water between MIN
and MAX. The pump will fail if it runs dry.**
2. Clean the pump, water tank, and drinking
basin.
3. If the above solutions don’t work, please
contact us at support@petlibro.com.
How often should I change the filters? Where to
get them?| It’s recommended to replace the filter and sponge every
2-4 weeks. Please contact us at
support@petlibro.com to purchase new
filters.
Why do I need to soak the filter before the first
use?| The filters absorb more water (and therefore clean more water)
when they’re wet and expanded. Soaking the filter removes particulate matter
that may have settled on the filter.
Specifications
| Model | PLWF003 |
|---|---|
| Power Adapter | Input 100-240V 50/60Hz |
Output, 5V/1A
Material| SUS 304 stainless steel
Water Tank Capacity| 2L
Operating Temperature| 0″C- 60″C / 32 °
F-140 ° F
Dimensions| 27.Sx 20.5 x 8.2 cm/ 10.8 x 8.1 x 3.2 in
Net Weight| 603 9 / 1.33lbs
Warranty
- 12-month warranty
- Life-time support
Please contact our customer service at
support@petlibro.com for a warranty extension
or any questions about the product.
For more information, please visit
www.petlibro.com.
Scan for more details
www.petlibro.com
PETLIBRO Stainless Steel Pet Fountain
Model, PLWF003 ©Libro Corp. All Rights Reserved.
Manufacturer: Shenzhen Libro Technology Co., Limited Address, Building 3,
Cloud Park, Shenzhen, China, 518129 JP Importer,Made in China
CAN ICES-3 (BI/NMB-3(8)
PLWF003_V1,0
Frequently Asked Questions
Is this pet fountain really worth the money?
Yes, the PetLibro Stainless Steel Cat Water Fountain is definitely worth the money. It has a lot of features that are not available in other cat water fountains. The price is also very reasonable considering how well it works.
Is this pet fountain easy to clean?
Yes, it is very easy to clean. All you have to do is remove the top lid and then take out the filter and wash it with soap and water. You can also use a brush to clean it if you want.
Can I use any kind of water in this pet fountain?
Yes, you can use any kind of water in this pet fountain. You can use tap water, distilled water or filtered water. You don’t have to buy bottled water for your cat’s drinking water.
How often do I need to change my cat’s drinking water?
You should change your cat’s drinking water every day so that he or she will always have fresh and clean drinking water available at all times. This will ensure that your cat will always drink from his or her favorite drinking fountain instead of from your bathroom sink or toilet bowl!
Will my cat get electrocuted if he or she drinks from this pet fountain?
No, your cat won’t get electrocuted if he or she drinks from this pet fountain because all electrical components are properly insulated and protected against electrical shorts and overloads. However, if you have an older model of this pet fountain (with no indicator light on top), then there is a possibility that your cat might get electrocuted because older models did not come with an indicator light on top that would tell you when it’s time to change the battery! So please make sure that you have an updated version of this pet fountain before purchasing one for your kitty!
How often do you change the filter in a cat’s fountain?
The filter should be replaced every 3 to 4 weeks or when there are visible signs that the filter is saturated with foreign matter (debris, food, hair, etc.) or if the water flow is impeded. More frequent changes may be necessary due to indoor environmental and water conditions, as well as multiple pet use.
How often do you change the water in a cat water fountain?
Clean the fountain every 3 to 4 days for multiple cats, and every 5 to 6 days for a single cat. Allow the number of cats you have to figure into the equation as well as if they are long or short hair.
How often do you change the filter in a pet fountain?
The charcoal filter should be changed every 2 to 4 weeks, depending on the number of pets using the fountain. If you have more pets or notice more debris, a slimy feel, or decreased water flow in your fountain, you should clean it more often.
Can you use a cat fountain without a filter?
All cat fountains will run without the filters. They do not assist in the mechanics of running the fountains. However, if the fountain has a lot of nooks and crevices in which debris can collect it will definitely want some sort of mechanical filtration to prevent this material from entering the pump.
How long do water fountain filters last?
Filters in residential settings should be changed every 6 to 12 months. Reverse osmosis, membranes, and additional alkalisers only need to be changed every 2 years or 4 years, respectively.
How often should I have to add water to my fountain?
As stated above, you need to have the pump constantly submerged with a consistent level of water in your outdoor fountain. Take note every day of the water level in your garden fountain. The pump will not cause the water levels to drop, but evaporation will so add water frequently.
How often should you clean a fountain?
You should give your fountain a regular cleaning every three months to prevent any algae from gaining hold of your fountain’s basin or pump. Placing your fountain in an area that has significant shade can also help to slow algae growth.
How often should you clean a cat fountain?
The fountain should be cleaned at least once a month to avoid mineral buildup and to ensure clean drinking water for your pet. It is recommended to clean the pump and change the filter when cleaning the fountain. Multi-pet households may need to clean every two weeks.
Video – Product Overview
Download The PDF Link:PETLIBRO Stainless Steel Cat Water Fountain PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>